ReviewsRailing Fittings

iCrimp Bench Mounted Wire Rope Swaging Tool for Aluminum Sleeves and Annealed Copper Loops from 3/64 to 1/8-inch

  • 「CAPACITY」3/64, 1/16, 5/64, 3/32, 7/64, 1/8 - inch(1.2-3.5mm)..
  • 「LABOUR-SAVING」This bench-mounted swaging tool has the same 4 cavities as the 15 inch IWS-1608S hand-held swagger, while this one can be solidly fixed on desks, better for frequent crimping works..
  • 「DURABLE」The head part is constructed with one piece high-grade special tool steel, which is rust-corrosion and anti-oxidation. The built-in calibration mechanism ensures long time service..
  • 「COMFORTABLE」Ergonomically designed non-slip grips bring comfortable hand feeling, eliminate the hand fatigue..
  • 「APPLICATION」For aluminum wire rope ferrules, crimping loop sleeve, duplex sleeve, fishing double sleeves, railing fittings. Compatible to sleeves made of aluminum and annealed copper..
Check Stock

Muzata 20Pack Stainless Steel Angle Beveled Washer 25 30 35 Degrees ID 5/16” for Cable Railing Kit Deck Stair Railing Wood Metal Aluminum Posts T316 Marine Grade CR58

  • IMPORTANT to know before purchases - Angle beveled washer CR58 is ONLY compatible with 1/8" cable railing thread studs (Muzata CR42 CR50 CR52) and 3/16" cable railing kit CR53. Please note that ONLY thread studs require angled washers while the lag screw doesn’t. For other models and compatibility, please check picture 2 to find the matched washers and cable railing kits you need.
  • For 25-35 degree stairs - This T316 stainless steel angled washer is specially designed to act as a filler between the cable railing kit and the end post on 25 30 35 degrees staircase. The inner diameter of CR58 is 5/16", suitable for 1/8" 5/32” 3/16" cable railing kit with outside diameter less than 5/16" in 25 30 35 degrees staircase cable railing system. The package includes: 20 packs of angle beveled washers.
  • Easy Installation and marine grade -This angle beveled washer is perfect for DIY a clean and neat cable railing project. It is easy to install, especially for beginners. This angled washer is made of T316 marine grade stainless steel, which has excellent durability and strong resistance to rust and corrosion, and extreme weather.
  • Pre-Designed System - We pre-designed a cable railing system to help you construct a 1/8" cable railing system, which includes tension....
Check Stock

Prescott Plastics 1 1/2 Inch Round Plastic Plug, Pipe Tubing End Cap, Durable Chair Glide (8)

  • Fits 1 1/2″ (one & a half inch outside diameter, *NOT 1.5 INCH HOLE SIZE*) round tubing with INSIDE hole diameters (ID) from 1 1/4″ to 1 7/16” (1.25″ to 1.43″) and wall thickness of .040 – .125″ (10-20 gauge).
  • High-grade Prescott Plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions..
  • Our easy to install 1-1/2″ inch snap in plugs serve as a long-lasting solution for many household or outdoor projects including replacements for fence/fencing railing posts, gate rail post covers, trailer frame ends, pole pipe rod caps, metal bike rack fittings, wrought iron steel finishing plugs, or any circular opening..
Check Stock

Prescott Plastics 3/4 Inch Round White Plastic Plug Tubing End Cap Durable Chair Glide 100

  • HOW TO FIT: Fits 3/4" OUTSIDE round tubing (**NOT 3/4" HOLE SIZE**) with INSIDE hole diameters (ID) from 1/2" to 11/16" Head size = 0.75" (19MM).
  • EASY TO INSTALL: Our 3/4" snap in plug is a long-lasting solution for many household or outdoor projects including: Fence/Fence Railing Posts, Gate Rail Post Covers, Trailer Frame End Posts, Pole Pipe Rod Caps, Metal Bike Fittings, and Wrought Iron Steel Finishing Plugs..
  • FLOORING PROTECTION: Prescott Plastics white ribbed plugs prevent scuffs on wood and other natural floors. They provide a protective “glide” for chair tips, bench feet, table legs, bar stools, patio furniture, and other furniture designed for furniture inserts and plugs..
  • PREMIUM QUALITY PLUGS: Our plugs and inserts are designed to hold up in all harsh weather conditions and high traffic areas..
  • MADE IN UK: These Plugs are specially designed and produced in UK to maintain quality, endurance and durability..
Check Stock

Lichamp Stainless Steel Cable Crimper Hex Lug Tool Hydraulic Hand Crimping Swaging Tool for Dteel Eire Rope 1/8 and 3/16 inch

  • STEEL CABLE SWAGER - Hand held hydraulic crimping tool with multi-size dies is great for crimping the stainless steel sleeve fittings of cable railing....
  • WIDE APPLICATION - Come with 9 pairs of the LUG TYPE crimping dies. Customized for swaging 1/8 inch(4 mm Die) or 3/16 inch (8 mm or 10 mm Die)....
  • POWER WIRE CRIMPER - Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Good choice for battery and welding cables, power wires, electrical....
  • LONG LASTING MATERIAL - All swaging dies were made of durable carbon steel and coated with chrome finish, high strength and good toughness..
  • EASY TO OPERATE - It is equipped with quick switch, C shape head and rubber-coated soft handle. Complete your swaging project smoothly in seconds..
Check Stock

Sowtowe Cable Railing Hardware, 20 Pairs Stainless Steel Cable Railing Kit,for 3/16 Cable Railing System, Adjustable Angle,T316 Marine Grade

  • Fit for 3/16 cable railing,This adjustable angle cable railing kit can be freely adjusted between 0 and 180 degrees, suitable for outdoor or indoor use.
  • The railing kit is made of high quality marine grade T316 stainless steel Thick Plate, which is rust-proof, durable and beautiful and easy to maintain.
  • This kit needs to be connected to the cable using a hydraulic crimping machine, it can be used for deck railing and garden fences, inclined stair railing or horizontal cable guardrail.
  • Cable railing hardware Kit, can be used in cable railing systems of various angles, for wood post and metal post,3/16" inner diameter, ideal for connecting to 3/16 inch stainless steel cable to wood post and metal post.
  • This product includes 20 Pcs Deck Toggle Turnbuckles, 20 Pcs Deck Toggle Ends and 82 Pcs (2 spare) of stainless steel countersunk head screws and 1 pcs drill bit for wooden post, 1 pcs tightening rod, 1 multifunctional small wrench..
Check Stock

Ingpro 80 Pack 316 Stainless Steel Left&Right Handed Thread Swage lag Screws for 1/8\ Decking Cable Railing Kit/Hardware,Wood Post Balusters (40 Pairs)

  • This cable railing kit(Single lag screw) made of high quality Marine Grade T316-Stainless Steel,It is anti-rust、 durable and easy to maintain;.
  • The angle of this professional Single-Screw cable railing hardware 0 to180 degrees could be free adjusted;So they can be used to all kinds of complex cable railing system:railing of stairs,deck railing and Garden fence…;.
  • This cable railing hardware applies to standard 1/8" inch cable(OD), Hydraulic crimper is required to connect this kit with the cable and the 4-6# dies is suitable.
  • The length of the screw is 2 inch, Pre-drilling screw holes is required before installation;The turnbuckle fully extended length is 10 inch and fully shortened length is 6-3/4 inch (Size details are shown in the figure).
  • This kind of cable railing fitting advantage:high quality、easy to install and looks clean..
Check Stock

Deck Man 1/8 inch T316 Stainless Steel Adjustable Angle Single-Screw Cable Railing Kit/Hardware for Wood Posts,Marine Grade (30 Pairs)

  • APPLICABLE: Standard size 2 "x4" (Actually 1.5 "x3.5") Deck Railing Connectors. Suitable for the installation of outdoor deck wood railing..
  • HIGH QUALITY: Deck Railing Bracket is high quality 304 stainless steel material one casting, it is absolutely Safe and Reliable, Never Rust. Our Deck Railing connectors are absolutely strong and safe compared to cheap products made of ordinary ABS, PP, nylon and other composite materials, You Don’t have to worry about it being attacked by rain or high temperature And weathering resulting in fracture..
  • SPECIFICATION SIZE: (W)2"*(L)4"(Actually/1.5"x3.5"),WIGHT/0.5lb..
  • EASY INSTALLATION: 1. Fit the deck railing connector to the top of the horizontal batten, drill pilot holes using a hand drill, and lock with drilling screws (corners and edges of the railing ends may need to be sanded/trimmed due to errors in the exterior dimensions of the wood). 2. Align the horizontal batten to the pre-installation position of the post, drill pilot holes using a hand drill (drilled at 30°), and lock with screws separately to complete the installation..
  • INCLUDE: The kit is equipped with all the accessory screws and can be installed immediately.(Deck Railing Bracket connectors.
  • Black coating 304 Stainless Steel screws-fix the Deck Ra....
Check Stock

Muzata 10ft Staircase handrail Brushed Stainless Steel Safety Wall Mounted for Indoor Outdoor Stair Hand Railing Rectangular 1'x2' Pipe on Stairs Balusters HK28 SL4,HR0 HR5

  • ...s included for installation, including 5ft brushed rectangular pipe x3, flat bracket x3, internal handrail connector x1,screws x9, plastic anchors x9, M4 drill bit x1, M5 screw tops x12, and center punch x1. We provide a one-stop shipping cart for your cable railing project including posts, handrails, cable railing fittings, cable and tools. Please reach us if you have any question or need.
Check Stock

Yaheetech Patio Deck Tiles Interlocking Wood Composite Deck Wooden Flooring Deck Tiles 12 x 12in Fir Wood Indoor&Outdoor Brown 55pcs

  • Specially for End Post - This cable railing kit is a great solution for posts up against a wall that you can't reach from behind, also ideal for single drilled end posts and corner posts to realize one-post corner solution. This deck railing hardware is installed by simply inserting it into the hole of drilled post and flipping the toggle.
  • Multi-Angled and Wide Adjustment - This tension wire kit can be rotated from 0-180 degrees for both horizontal and angled sections. This turnbuckle also has a wide adjustable range of up to 40ft in a straight run, making it much easier for beginners to install a cable railing system.
  • High Quality- The cable railing kit is made of T316 stainless steel, which is excellent in rust resistance and weather protection. Suitable for both indoor and outdoor, even coastal applications.
  • Pre-designed system- This product belongs to the SpaceSaver cable railing system, in which you can refer to how to build a cable railing project. It includes: Stainless steel side-mounted posts Muzata PF01.
  • Handrails (HT10-flat, HT20-round, HT30-thin).
  • cable cutter and hydraulic crimper CK12).
  • Adhesive washer CR74. For further information please scroll down to" product description" or....
Check Stock

Steel DN Mate 100 Pack T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Steel Cable Railing Kit, Cable Railing Hardware, DIY Wood Baluster, Wrench Include, DM50

  • New design of deck cable railing kit, clean and elegant. This deck railing kit made of stainless steel T316 material, anti-rust, water, and corrosion, marine Grade, good for indoor or outdoor usage. It is suitable to DIY your stair railings, porch railing, terrace railings, and deck railings, With our new made wrench, installation becomes much easier..
  • This deck railing hardware fits 1/8" OD cable of the cable deck railing system. The thread lag screws are designed for timber/wood posts. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. This design can make wire deck railing hardware fits last longer..
  • Length of cable should be 1-1/2" shorter than wood surface distance(as shown in pic.4).
  • if you want to build a high-quality cable railing system, standard 1/8" (OD) cable which was made of T316-stainless steel is recommended..
  • The lag screws could be drilled into wood to adjust the tightness without an extra turnbuckle or tensioner. Deck and Stair Cable railing system is not only simple but also won't block your view. A simple cost-effective cable ra....
Check Stock