ReviewsRainbird 5gpm

Habitech Irrigation Fittings Kit for 1/2 Tubing - 20 Piece Set - 6 Tees 6 Couplings 2 Elbows 6 End Cap Plugs - Barbed Connectors For Rain Bird And Compatible Drip or Sprinkler Systems

Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. This 20-piece kit includes 6 tees, 6 couplings, 2 elbows and 6....
These 17mm barbed fittings work with half inch drip tubing from 0.560 to 0.600 Inside Diameter (ID). Compatible with many types of Rainbird, Orbit,....
The go-to fitting option for most contractors will always be the standard 17mm barbed insert fitting. These 17mm drip fittings are made with....
Save money and time buying everything you need at once in this 20-Piece Set. Jumpstart your drip irrigation system installation with this set of....
Easy and secure installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If....

Check Stock

Happybuy MP-15RM beer brewing pump Plastic Head with 0.5 inch MPT Magnetic home brew pump 110 Volt Inline Home Brewing System Beer Pump

【EASY OPERATION】- Prime by running liquid through pump prior to turning on.
Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
【OPERATION QUIET】 – Advanced magnetic drive technology with static-impeller, without any leakage ever.Brew pumps very quiet..
【USED WIDELY】 -This homebrew pump is an optimum liquid transport pump with high output volume and quiet operation for industrial and home equipment..
With 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft)..
【SPECIFICATIONS】-1/2inch MPT Inlet&Outlet.
【MATERIAL】- The food grade pump MP-15RM features with food grade high temp plastic head 1/2 inch thread to transfer hot and cold liquids, is the most efficient way to move piping hot and heavy loads of liquid.

Check Stock

JAYEE 24P Drip Irrigation Fittings Kit for 1/2\ Tubing (.600 ID), 17mm Parts- 6 Tees, 6 Couplings, 6 Elbows,6 End Cap Plugs- Barded Connectors for Rain Bird Pipe and Sprinkler Systems (24 Pieces Set)

Great value: includes 6 Tees, 6 Couplings and 6 Elbows,6 End Cap Plugs, 24 pieces drip irrigation parts in total.
These 17mm irrigation fittings work with most of 1/2" Drip irrigation tubing (17mm .560-.600" ID), compatible with many types of Rainbird,Orbit,Dig and Toro half inch tubing.
Made with environmentally-friendly and chemical-resistant materials, it is sturdy and will last for a long time.
Easy to install without glue, tools, or clamps. Barbed ends grab tubing for a secure leak-proof connection. Tips: Heated end of hose to help it slide on fitting.
Ideal for Use with garden greenhouse, flower bed, patio and agricultural watering applications.

Check Stock

Happybuy Beer Brewing Pump Stainless Steel Head with 1/2 Inch Mpt Magnetic Home Brew Pump 110 Volt Inline Home Brewing System Beer Pump

Specifications: 1/2inch MPT Inlet&Outlet.
With 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft)..
Safe Transfer Liquids: Tested for safety and performance standards, it can transfer hot and cold liquids quickly and safely. Comply with FDA food standards, can be used in prpfessional occasions. Food grade pump can withstand caustic chemicals and can be effectively sanitized..
Quiet and Efficient: The separation of the pump main shaft and the impeller achieves the effect of damping and preventing vibration, and reduces the impact of the motor vibration on the pump. With excellent smooth running and efficient quiet cycle..
Easy Operation: Prime by running liquid through pump prior to turning on.
The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
Used Widely: This homebrew beer pump is an optimum liquid transport pump with high output volume and quiet operation for industrial and home equipment..

Check Stock

Sprinkler Head Wrench, The fastest most versatile tool to remove, replace & adjust sprinkler heads w/no digging & no mess. Works on ALL SIZES & ALL BRANDS of Spray heads, Rotor heads & Jar Top valves

Made For Irrigation Professionals, Sprinkler Tool Engineered specifically for ALL sizes & ALL brands of rotor heads, spray heads & jar top valves up to 4" in diameter. GUARANTEED FOR LIFE.
MULTIFUNCTIONAL, Angled jaw for easier access & precise grip, Outer jaw teeth for Spray & Rotor head EXTRACTION Compatible with Hunter, Rainbird, Krain, Orbit Nelson, Toro, Weathermatic, Irritrol, Signature & All other brands..
Bottom teeth engage sprinkler cap fins for BODY OR CAP & GUT REMOVAL with no digging. Easily RAISE HEADS or convert to drip. Directions: Turn slow and easy to remove the entire head with the body. Turn quick to crack the cap loose to remove just the cap & guts..
Rotor & spray RISER UP LOCK SYSTEM, Lock the riser up for easy nozzle adjustment. Great for installing Heads Repair, Adjustment, Replacement Sprinkler Tool.
Replace & adjust heads fast ~Dig Less with no turf damage See all our tools at Keyfit Tools ~Keyfit Tools Patented Products.

Check Stock

Replacement Pop-up Sprinkler Heads, 16PCS Red Adjustable Sprinkler Nozzle Variable Arc Nozzle Adjustable Irrigation Drippers Sprinklers 9.8 Feet, 10VAN

... can reach more than 70 percents, and the area running time is greatly shortened..
【Practical Design】Spray edge is clear, reduce wasting water and leak water. High elasticity spring, it can avoid leak effectively when water pressure is low. Even distribution results in better lawn coverage. It is compatible with RainBird, Hunter, Orbit pop-up sprinklers..

Check Stock

Anbull Self Priming Water Pump 110V 5.0GPM 55PSI, Industrial Water Pressure Diaphragm Pump with 3/4" Garden Hose Adapters for Liquid Transfer, Marine, Agriculture Applications

Outlets: 1/2"-14 external thread interface.
【Anti-vibration/noise reduction】Water pressure pump equipped with anti-vibration iron plate mounting bracket and rubber feet, which can reduce the working noise more greatly. The surface of the iron plate adopts galvanized anti-rust treatment, which is durable..
【100% pure copper motor】The water pump has overload and overheat protection function, the noise is smaller and the speed is higher, and the operation is safer and more reliable.When the motor generates too much heat, the circuit can be automatically disconnected to protect the motor..
【Auto close/open】This power water pump has a built-in adjustable pressure switch that turns on/off at 55 PSI. Our industrial water pressure pump are self-priming , allow for usage even if located above water tank. Electric water pump automatically opens when turn on the water tap, stops when turn off the water tap..

Check Stock

Hourleey 2 Pack Brass Impact Lawn Sprinklers for Yard, Heavy Duty Water Sprinkler Head with Zinc Alloy Spike Base, Adjustable Pulsating Sprinkler for Large Area Lawn Patio Garden

Package Include: 2 pieces brass impact sprinkler, 2 pieces zinc alloy spike bases. The size of Hourleey lawn sprinkler is 4.7 inch / 12 cm in length and 4.3 inch / 11 cm in height, the size of the sprinkler base is 2.5 x 7.9 inch. Total height is 11.5 inch..
Reliable Quality: Hourleey water sprinkler head is made of heavy duty brass and stainless steel material, and the spike base is made of high quality zinc alloy material, is sturdy, waterproof, corrosion resistant, can be used for a longer time, suitable for long-time outdoor use..
Easy to Use: Hourleey garden sprinkler can be adjustable 0-360 degrees pattern, the spray distance and spray angle can be adjusted by the 4 different adjustments on the rainbird sprinkler heads according to your needs, and the stakes is easy to insert into the ground..
Large Area Coverage: The lawn sprinklers can cover about 20-35 FT in radius. Maximum water pressure is 80 PSI. The coverage of the irrigation is related to the water pressure..
Widely Application: The impact sprinkler system fits with most commonly US standard 3/4 inch thread fittings, perfect for lawn, garnden, patio, greenhouse, flower bed, swimming pool, misting, cooling irrigation etc..

Check Stock

Hourleey Impact Sprinkler on Tripod Base, 2 Pack Heavy Duty Sprinklers for Lawn Yard Garden, 0-360 Degree Large Area Coverage, 3/4 Inch Connector Extension Legs Flip Locks with Brass Head

Impact Lawn Sprinkler: Package Include 2 pieces brass impact sprinkler, 2 pieces tripod base. Achieve free rotation spray water 0-360 degree. You can adjust the spray distance and spray angle through the 4 different adjustments on the rainbird sprinkler heads according to your needs..
Premium Quality: The impact sprinkler head is made of heavy duty brass and high quality solid alloy material. The tripod stand is made of solid alloy metal and part plastic material. is waterproof, corrosion resistant, sturdy and made to last, can be used for a longer time..
Large Area Coverage: The lawn sprinkler can cover about 20-35 FT in radius. Maximum water pressure is 80 PSI. The coverage of the irrigation is related to the water pressure..
Easy to Use: The adjustable tripod sprinkler base can be extended from 16 to 27 inch, can be locked through the swivel bolt on the goose neck hose. Equipped with a rubber filter O-ring which can filter the sand and gravel, prevent the nozzle from clogging. The goose hose is easy to connect with 3/4 inch US standard garden hose..
Widely Applications: Hourleey water sprinkler is suitable for all US standard 3/4 inch garden sprinkler hose with internal thread fittings. Perfect for lawn, garnden, patio, greenhouse, flower bed, swimmin....

Check Stock

Hourleey Impact Sprinkler on Tripod Base, Heavy Duty Brass Sprinklers for Yard Lawn Garden, 0-360 Degree Large Area Coverage, 3/4 Inch Connector Extension Legs Flip Locks with Brass Sprinkler Head

Impact Lawn Sprinkler: Package Include 1 pieces brass impact sprinkler, 1 pieces tripod base. Achieve free rotation spray water 0-360 degree. You can adjust the spray distance and spray angle through the 4 different adjustments on the rainbird sprinkler heads according to your needs..
Premium Quality: The impact sprinkler head is made of heavy duty brass and high quality solid alloy material. The tripod stand is made of solid alloy metal and part plastic material. is waterproof, corrosion resistant, sturdy and made to last, can be used for a longer time..
Large Area Coverage: The lawn sprinkler can cover about 20-35 FT in radius. Maximum water pressure is 80 PSI. The coverage of the irrigation is related to the water pressure..
Easy to Use: The adjustable tripod sprinkler base can be extended from 16 to 27 inch, can be locked through the swivel bolt on the goose neck hose. Equipped with a rubber filter O-ring which can filter the sand and gravel, prevent the nozzle from clogging. The goose hose is easy to connect with 3/4 inch US standard garden hose..
Widely Applications: Hourleey water sprinkler is suitable for all US standard 3/4 inch garden sprinkler hose with internal thread fittings. Perfect for lawn, garnden, patio, greenhouse, flower bed, swimmin....

Check Stock

Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT

...FREE FIT. Our faucet connection adapter works with the widest range of half inch tubing, from .520 to .620″ Inside Diamater, .620 to .710” Outside Diameter and .045 to .055 Wall Thickness. PLEASE MAKE SURE YOUR TUBING SPECIFICATIONS FALL WITHIN THESE RANGES FOR THE PROPER FIT. Compatible with many models of Rainbird, Orbit, Dig, Hunter and Toro tubing as well as generic 1/2″ blank drip irrigation tube or drip line. Large fitting ID means less flow restriction..
ZERO LEAKS. Power-Loc fittings don’t leak. Barb design ensures tubing will not slip out or blow off at high pressure and temperature. No slippage or leaking, even under high pressure..
REUSABLE & LONG LASTING. Unlike other types of fittings, these parts are reusable and may be removed and reinstalled for a long, versatile life. Simply loosen nut to remove tubing. Durable construction provides years of reliable use..
PATENTED LOCKING TECHNOLOGY. Power-Loc fittings are quickly revolutionizing irrigation fitting expectations worldwide. The patented locking technology works great under high pressures and around heavy foot traffic. A more rugged alternative to insert and compression fittings, these adaptors have a locking mechanism that is easily tightened after the drip li....

Check Stock