ReviewsRainbird Wifi Module Esp Tm2

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

Rain Bird SST600OUT Simple-To-Set Indoor/Outdoor Sprinkler/Irrigation Timer/Controller, 6-Zone/Station (this new/improved model replaces SST600O)

  • Rain Bird ESP-TM2 controllers and ESP-Me controllers manufactured after November 2, 2016..
  • ESP-Me controllers manufactured before November 2016 can be upgraded to accept this module by purchasing a new ESP-Me upgrade panel (sold separately).
  • Operates like a remote onsite and provides complete access to the irrigation system while offsite.
  • Simply plug the LNK WiFi Module into the accessory port on the front panel of a compatible controller.
  • Use your tablet or mobile device to set, monitor and make changes to watering schedules.
Check Stock

AITRIP 5PCS ESP-WROOM-32 ESP32 ESP-32S Type-C USB Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino

  • Package: You will get 5 Pieces Type-C USB ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE Features:.
  • ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA..
  • Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board.
  • Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
  • The best power and RF characteristics are safe, reliable and scalable for various applications..
  • 5PCS ESP32 Development Board TYPE-C USB CH340C WiFi+Bluetooth Ultra-Low Power Consumption Dual Core ESP32-DevKitC-32 ESP-WROOM.
Check Stock

Adafruit 4201 Airlift – ESP32 WiFi Co-Processor Breakout Board

  • a breakout board that lets you use the powerful ESP32 as a WiFi co-processor..
  • Having WiFi managed by a separate chip means your code is simpler,.
  • Send basic but powerful socket-based commands over 8MHz SPI for high speed data transfer.
  • We placed an ESP32 module on a PCB with level shifting circuitry, a 3.3V regulator, and a tri-state chip for MOSI so you can share the SPI bus with other devices.
Check Stock

AITRIP 10PCS ESP8266 NodeMCU LUA CH340 ESP-12E WiFi Internet Development Board 4M Flash Serial Wireless Module for Arduino IDE/Micropython

  • ESP8266 CH340 CH340G NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Built-in Micro-USB, with flash and reset switches, easy to program.
  • Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
  • It's a IOT unit with all available resources on board, support smart link and smart networking..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
Check Stock

Rain-Bird Controller Indoor Outdoor Lawn Irrigation Sprinkler Timer ESPME3 (+ WiFi + 3 Modules)

  • With 4 to 22 stations, the ESP-ME3 provides the station count options customers need. Install the same controller on residential and light commercial sites. Add station modules when expanding irrigation without removing or even powering down the controller..
  • Upgrade the ESP-ME3 to a SMART controller by adding the LNK WiFi module and a WR2 rain sensor. The LNK makes programming and monitoring easy through the enhanced Rain Bird app..
  • Configurable to 22 stations with additional 3 or 6 station modules for different sized jobs or future irrigation needs. Comes with power plug and outdoor cabinet for indoor or outdoor installation..
  • Be alerted of system issues including electrical, programming, or high flow (when using a flow sensor) through a red LED and scrolling messages coupled with mobile device alerts when used with the LNK WiFi Module and the Rain Bird app..
  • Large text and symbols make the color-coded dial positions easy to understand. Large 3” back-lit screen is clear to read in dark garages or sheds..
Check Stock

Rain-Bird Controller Indoor Outdoor Lawn Irrigation Sprinkler Timer ESPME3 (+ WiFi + 2 Modules)

  • With 4 to 22 stations, the ESP-ME3 provides the station count options customers need. Install the same controller on residential and light commercial sites. Add station modules when expanding irrigation without removing or even powering down the controller..
  • Upgrade the ESP-ME3 to a SMART controller by adding the LNK WiFi module and a WR2 rain sensor. The LNK makes programming and monitoring easy through the enhanced Rain Bird app..
  • Configurable to 22 stations with additional 3 or 6 station modules for different sized jobs or future irrigation needs. Comes with power plug and outdoor cabinet for indoor or outdoor installation..
  • Be alerted of system issues including electrical, programming, or high flow (when using a flow sensor) through a red LED and scrolling messages coupled with mobile device alerts when used with the LNK WiFi Module and the Rain Bird app..
  • Large text and symbols make the color-coded dial positions easy to understand. Large 3” back-lit screen is clear to read in dark garages or sheds..
Check Stock

3D Printer Control Board Back EMF Protection Powerful 520Kb RAM USB Update Firmware ESP32 3D Printer Motherboard with WiFi for Serial Screen

  • SUPPORT VARIOUS SCREEN: This is a 3D printer main control board with onboard ESP32 wifi, supports for Marlin2.0 firmware, in addition to ordinary....
  • 32 BIT MICROPROCESSOR: Built in ESP32 DOWD V3 chip, for Xtensa dual core 32 bit LX6 microprocessor, supporting clock frequency up to 240MHz.
  • POWERFUL AND VERSATILE: The main board adopt ESP32 WROOM 32U module, embedded dual core 32 bit high speed MCU, the clock is up to 240MHz. And....
  • 8M BYTE CHIP: In addition, the module has a built in 8M byte Flash memory chip, which provides effective protection for more application scenarios.
  • BACK EMF PROTECTION: VEXP has designed a protection circuit for the back EMF generated by the stepper motor, which greatly reduces the damage to the....
Check Stock

3 Pieces ESP WROOM 32 ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters

  • Package contains: you will get 3 pieces of ESP-32 2.4GHz dual-mode WiFi development boards, enough for your daily use and replacement.
  • Multiple functions: ESP32 development board integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
  • And the entire solution occupies the smallest printed circuit board area.
  • ESP-32 development board is safe, reliable and scalable to various applications, bringing you a lot of convenience.
  • Small size: ESP-32 dual-mode module is compact and easy to embed into your device, convenient to use.
  • Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip ESP-WROOM-32, and 40nm low power consumption technology.
Check Stock

AITRIP 5PCS D1 Mini Pro 16MB ESP8266 ESP-8266EX CP2104 WiFi External Antenna Connector Micro USB Serial Converter IoT Development Board PWM/12C/1-Wire Compatible with Arduino

  • D1 Mini Pro is a mini WiFi board with 16MB(128M bit) flash, external antenna connector and built-in ceramic antenna based on ESP-8266EX. It offers a complete and self-contained WiFi networking solution..
  • External antenna connector；Built-in ceramic antenna.
  • The ESP8266 is an all-rounder and a very popular WiFi enabled micro-controller. AITRIP D1 Mini Pro is very similar to the traditional D1 Mini. However, this latest version has been fundamentally revised.
  • The ESP2866 D1 Mini Pro is smaller and lighter.
  • Same size as D1 mini, but more light，Compatible withMicroPython and NodeMCU.
  • The D1 Mini Pro module has 11 digital I/O pins and all pins support interrupt/ pwm/ I2C/ 1 wire/ 1 analogue input (3.2 maximum input). It stands out for having an external antenna connector..
Check Stock

Arduino | Step by Step: The Ultimate Beginner’s Guide with Basics on Hardware, Software, Programming & DIY Projects (Arduino | Introduction and Projects Book 1)

  • ... biggest & most advanced starter kit for Arduino. 65+ pieces w/ FIVE main boards: 100% Arduino-compatible Uno R3, Mega 2560, Nano V3, ESP32 WiFi+Bluetooth and ESP8266 NodeMCU development platforms.
  • Explore programming electronics with all of the most common sensors and modules in Arduino like RFID Card-Key Reader, Ultrasonic Sensor, Real Time Clock, Impact Switch, 3-Axis Accelerometer, LCD, Relay, Servo and Stepper Motor - suitable for beginner or advanced users.
  • Build wireless IoT Automation projects with ESP32 Development Board, HC-05 Bluetooth Module, ESP8266 Wi-Fi Module, 2x NRF24L01 Wireless Transceivers and the W5100 Ethernet Shield.
  • All-in-one bundle with extra accessories + 16G USB storage with free access to the GAR Dropbox Cloud including PDF guides & links to tutorials and videos to help you learn to program all the parts and get started quickly.
  • Effective technical/customer support from USA with lifetime replacement guarantee on all parts – The Monster comes in 16" x 12" durable organizer tool box for safe transport and storage. No soldering req....
Check Stock