ReviewsRaspberry Pi 4b Power Supply

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..

Check Stock

GeeekPi Raspberry Pi 4 SATA Storage, Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.0 USB3.0 Shield (Only for Raspberry Pi 4B)

Only For Raspberry Pi 4 Model B, supports up to 4TB 2.5 inch SATA hard disk drives (HDD) / solid-state drive (SSD), Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 board.
X825 Case,please refer to ASIN: B093WYWVRX.
Power supply request: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output , Please use high quality DC 5V 4A power supply, highly recommend to use ASIN: B07YJDS71K(With TUV,FCC,RoHS,CE Certifications). If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD or not recognize the HDD/SSD ..
OS compatiable: All Raspberry Pi operating systems.
USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller.
Package Includes:1 x X825 V2.0 Expansion Board, 1 x USB 3.1 connector ,1 x Mounting Screws Pack.
Note: The Raspberry Pi 4B board and the 2.5" SATA HDD/SSD are Not Included.

Check Stock

Geekworm Raspberry Pi 4 Power Supply, 20W 5V 4A USB C Power Adapter Type C Fast Charger UL Listed Support Raspberry Pi 4 Model B/NASPi/DACPi/X-C1/X825/X735/X728/X708/X706/X703/X930

Geekworm Raspberry Pi 4 Model B Power Supply, USB C Type C power adapter designed and tested for the Raspberry Pi 4 Model B 1GB / 2GB / 4GB / 8GB Version. Also support NASPi / DACPi /X-C1/ X825 / X735 / X728 / X708/ X706 / X703/X930 expansion board/Retroflag PiStation Case..
Power Input: 100-240V AC, 50-60Hz, 0.8A Max. Output: 5V 4A 20W. Cable length: 1.2 m / 47.24 inches.
Raspberry Pi 4B Power Adapter with UL Listed Certification - UL Listed..
Power Supply Functions: Over voltage protection.
Packing List: 1x 5V 4A US Plug Type-C Power Supply.

Check Stock

GeeekPi Mini Tower UPS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, Raspberry Pi UPS Plus Hat, 0.96 inch OLED Display, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

Support OLED display, UPS Plus integration, ICE Tower Cooler integration..
The 0.96 inch OLED screen was already mounted on the case. It can display the running status of Raspberry Pi or UPS Plus through programming, such as Raspberry Pi’s IP address, CPU temperature, disk utilization, CUP load, memory status and other system information..
The fan on super ICE Tower Cooler upgraded to PWM RGB fan. Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃..
The UPS Plus hat will charge the batteries while providing power output at the same time from an external power source and it can automatically switch to batteries output when external power supply is unavailable, keeping the system running trouble-free. It also can power Raspberry Pi via Pogo Pins without using any GPIO resources..
Package Includes: 1 x ABS Mini Tower Case, 2 x Acrylic side panel,1 x 0.96 inch OLED Display(already mounted on the case ),1 x UPS Plus Hat, 1 x ICE Tower Cooler, 1x GPIO Edge Extention,1x Assembly Manual (Note: Raspberry Pi 4B is Not included in ....

Check Stock

UCTRONICS Raspberry Pi Cluster Case, Desktop Metal Rack Case, 4 Layers with 2 Cooling Fans Compatible with Raspberry Pi 4B and 2.5\ SSD

For All Raspberry Pi B Models: The metal enclosure is designed for Raspberry Pi and is compatible with Raspberry Pi 4B+/3B/3B+/2B/B+.
Supporting up to 4 2.5" SSDs (7mm thickness) and 4 Pi installations.
it allows you to add additional storage to your Raspberry Pi whenever and wherever you want, making it easy to build Raspberry Pi clusters and Raspberry Pi NAS servers. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
Side Opening Design: you can easily position the Raspberry Pi HDMI, audio, and power supply. Each layer is 40mm/4.57inch high, there is enough space for you to install 4 mini PoE hats and raspberry pi PoE+hat..
Made of metal aluminum, Size: 4.13*4.84*7.12inch.
the case is strong and durable, compact and lightweight. So you can easily place it anywhere on your desk. An SD card slot is reserved in the mounting bracket, which can be accessed from the front of the case using an SD card adapter (Asin: B09CKRDFTH). 4 additional screw holes on the top of the enclosure for stacking..
Easy to install: The case is not pre-assembled and requires simple installation once you get it in your hands. Each mounting plate uses M4 hand screws, making it easy to remove and install one of the units without a screwdriver..

Check Stock

Heayzoki Power Supply Module for Raspberry Pi 4B / 3B + Ethernet POE Fan Electronic Component,for Raspberry Pi Ethernet POE Fan Power Supply Module

This product provides a convenient and cost-effective way to power equipment..
This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
With small size, easy to carry and store, convenient to use and with good performance..

Check Stock

UCTRONICS Pi Rack Pro for Raspberry Pi 4B, 19\ 1U Rack Mount, Support for 4 2.5\ SSDs, Secure Shutdown, 0.96\ Color Display for Raspberry Pi

【For Raspberry Pi 4B】Designed specifically for the Raspberry Pi 4B, the Raspberry Pi rack allows you to install up to 4 RPis, making it easy to build small Raspberry Pi clusters..
【4 SATA shields】No need for SATA-to-USB cables, just plug in 4 2.5" SSDs for additional storage capabilities. The board is also reserved for a fan interface, which supports external 2.54 2pin fans to cool the Raspberry Pi. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
【Safety Shutdown】4 power buttons can be pressed to achieve a soft shutdown, and then press to power on. No longer worry about the damage caused by a hard shutdown on the Raspberry Pi..
【0.96" LCD display】graphical display of RAM/Disk/Temp usage, IP address always on, and also supports custom display content..
【19" 1U Rack Mount】19×5.72×1.75 inch(482.6×145.4×44.5mm), the pi rack can be installed into the cabinet or placed on the desktop. This solution not only beautifies your cabinet and desktop but also keeps dust out..

Check Stock

Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A，5V (Micro-USB)，9~24V Power Port, for High-Power Device

...wer supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10, Linux, Ubuntu, MacOS systems, no need drive file, plug and play. If the USB device needs to be restarted, the device can be powered off and restarted through the switching power supply without plugging and damaging the interface..
Size support Raspberry Pi stack installation -- Support installation of Raspberry Pi 4B/3B+/3B,The kit contains the exclusive copper column screw accessories for jetson nano and raspberry pi, the material is of reliable quality, and there is technical help.

Check Stock

MARSTUDY Raspberry Pi 4B Starter Kit 64GB Edition / 64GB MicroHC10 Card with Raspberry Pi OS pre-Installed / Premium case / Low Noise Bearing Fan / 5.1V / 3A USB-C Power Supply with ON / Off Switch

MARSTUDY Raspberry Pi 4B Starter More Kit Plus (64GB Edition) contains everything you need to build your own minicomputer. The Starter Kit Plus....
MARSTUDY Premium Transparent Raspberry Pi 4 Case with Integrated Fan Mount, MARSTUDY Low Noise Bearing System Fan, 3 heat sinks for heat dissipation.....
MARSTUDY unique low noise bearing system fan, the fan interface is a DuPont 2P branch line and has two speed cooling modes, this fan is quieter than....
MARSTUDY 5.1V / 3.5A USB-C power supply is designed to power the latest Raspberry Pi 4 Model B boards. Type C cable, AC adapter 110V-240V input....
Raspberry Pi OS pre-installed - 64GB Edition. MARSTUDY Raspberry Pi 4 Starter More Kit Plus includes MARSTUDY 64 GB Class 10 Micro Card with the....

Check Stock

RETROFLAG PiStation CASE, Raspberry Pi 4 Case with 800x480 Pixel 4.3 inch LCD Monitor Display Screen, Stereo Speaker, Cooling Fan and 3pcs Heatsinks for Raspberry Pi 4 Model/Pi 4B (Pi 4 Case)

【Raspberry Pi Monitor】 Retroflag PSOne Pi 4 CASE is upgraded version, specifically designed for Raspberry Pi 4 Model B, NOT compatible with other Raspberry Pi model. 4.3 inch Raspberry Pi monitor equipped with IPS screen and HD 800x480 pixel high resolution..
【Safe Shutdown and Reset】 This is Retroflag Pi 4 CASE version with Safe Shutdown and Safe Reset function. It will be more safe for your SD card when shutdown and reset..
【Easy to Assemble & Access】 Pi 4 CASE offers your Raspberry pi good protection with ONLY few steps to assemble, you can access to all ports of Raspberry Pi 4 Model B, such as power, audio, USB, LAN, MicroSD Card Storage, and Micro HDMI connector without opening the CASE..
【Original PS One Console Style】We created this RETROFLAG Pi 4 case applying the most iconic element in the retro game world as a homage to the most classic console ever made, this Pi 4 case can make your Raspberry Pi 4B become a NES retro gaming machine in one second! Designed the CD-ROM drive for storing your SD cards in the appearance of a game cartridge..
【Strong Heat Dissipation】RETROFLAG Pi 4 Case is equipped with a quiet cooling fan and 3pcs heatsink with better heat dissipation, could prevent system failure and Raspberry Pi 4B from o....

Check Stock

Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B

✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.

Check Stock