ReviewsRaspberry Pi B Heatsink And Fan

BITMAIN Antminer T9 S1 S3 S5 S7 S9 A3 D3 L3 V9 120mm High Temp Fan Duct 4 INCH USA Made 1 PCS

Raspberry Pi 4 Touchscreen - Raspberry Pi 4 Inch IPS full-angle display monitor, 800 x 480 physical resolution support HDMI input, refresh rate up to....
Orange Pi Touchscreen - Miuzei raspberry pi 4 monitor support HDMI audio output, data entry (computer, DVD), HDMI audio input, stereo 3.5mm audio....
Raspberry Pi 4 Screen Case - Pi 4 inch touch screen compatible with raspberry pi 4 b/4b/4 model b. Display ONLY Support System - Raspbian, Kali-linux,....
Touchfunction Support System - only support Kali, Raspbian, Ubuntu, Octopie. The 4 inch display monitor with touch control function (need to install....
Packaging Content & After Sales - you will receive raspberry pi screen, raspberry pi heatsink, 30mm cooling fan, screwdrive, awesome looking, it can....

Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....

Check Stock

MazerPi Raspberry Pi 4 Case, Raspberry Pi Case with Cooling Fan, Raspberry Pi 4 Heatsink for Raspberry Pi 4 Model B, Pi 4B, Pi 4

The cooling fan we provided is very quiet.
New Version Pi 4 Case with Cooling Fan and Heatsink.
This protective case is designed specifically for the Raspberry Pi 4 Model B.
Raspberry Pi Motherboard is not included.

Check Stock

RETROFLAG PiStation CASE, Raspberry Pi 4 Case with 800x480 Pixel 4.3 inch LCD Monitor Display Screen, Stereo Speaker, Cooling Fan and 3pcs Heatsinks for Raspberry Pi 4 Model/Pi 4B (Pi 4 Case)

【Raspberry Pi Monitor】 Retroflag PSOne Pi 4 CASE is upgraded version, specifically designed for Raspberry Pi 4 Model B, NOT compatible with other Raspberry Pi model. 4.3 inch Raspberry Pi monitor equipped with IPS screen and HD 800x480 pixel high resolution..
【Safe Shutdown and Reset】 This is Retroflag Pi 4 CASE version with Safe Shutdown and Safe Reset function. It will be more safe for your SD card when shutdown and reset..
【Easy to Assemble & Access】 Pi 4 CASE offers your Raspberry pi good protection with ONLY few steps to assemble, you can access to all ports of Raspberry Pi 4 Model B, such as power, audio, USB, LAN, MicroSD Card Storage, and Micro HDMI connector without opening the CASE..
【Original PS One Console Style】We created this RETROFLAG Pi 4 case applying the most iconic element in the retro game world as a homage to the most classic console ever made, this Pi 4 case can make your Raspberry Pi 4B become a NES retro gaming machine in one second! Designed the CD-ROM drive for storing your SD cards in the appearance of a game cartridge..
【Strong Heat Dissipation】RETROFLAG Pi 4 Case is equipped with a quiet cooling fan and 3pcs heatsink with better heat dissipation, could prevent system failure and Raspberry Pi 4B from o....

Check Stock

iUniker Raspberry Pi 4 8GB Kit, 5V 4A Raspberry Pi 4 Power Supply, 4K HDMI Cable, Heatsink Raspberry Pi 4 Case - 64GB Edition (8GB RAM)

Includes Raspberry Pi 4 8GB Model B with 1.5GHz quad-core CPU (8GB RAM).
Includes TF Card (Class 10), USB Card Reader.
iUniker Raspberry Pi 4 Case with 4010 Cooling Fan and Heatsink Sets.
iUniker 4A USB-C Raspberry Pi 4 Power Supply with Switch, Set of 2 Micro HDMI to HDMI Cables (Supports up to 4K 60p).
iUniker Quick Start Guide for Raspberry Pi 4.

Check Stock

LoveRPi Performance Pro Active Cooling Case White for Raspberry Pi 3 ODROID-C2

MAXIMUM PERFORMANCE: Raspberry Pi 3*/2/B+ and ODROID-C2/C1+**.
DUAL MODE ACTIVE COOLING: ABS Case comes with 4 Rubber Feet, 8 Screws, Active Cooling Fan 5V or 3.3V Operation.
ACCESS TO EVERYTHING: Camera Cable Slot, Display Cable Slot, GPIO Cable Slots! Beauty without compromising capability!.
USABLE WITH TALL HEATSINKS: Fits LoveRPi High Surface Area 10mm Heatsink Set, Keeps Raspberry Pi 3 at Maximum Performance and Cool (under 60C).
Raspberry Pi 3 MicroSD card slot does not have a spring. PLEASE REMEMBER TO REMOVE THE MICROSD CARD PRIOR TO INSTALLING OR REMOVING THE CASE!.

Check Stock

Argon ONE M.2 Aluminum Case for Raspberry Pi 4 with Power Button and Fan | SATA SSD Support | B-Key and B+M Key Compatible

Most powerful Raspberry Pi 4 case with M.2 SATA SSD Carrier Board, Power Button, Controllable Internal 30mm Fan & IR Sensor.
Integrated with M.2 SATA Expansion Kit for use with M.2 SATA SSD B-Key or B+M Key.
power and transfer via USB 3.0 Port. With safe shutdown power button & software controllable 30mm fan..
Keeps RPI 4 cooler with aluminium case enclosure and heatsink. GPIO access via removable magnetic cover..
Neat cable management. Easily connect power cable, two (2) full sized HDMI display ports, GPIO accessories and comes with built-in IR..
Maximize Pi4 potential as a single board computer by turning it into a tiny desktop, media player, retro console or server. Compatible with Raspberry Pi 4 Model B 1GB / 2GB / 4GB / 8GB..

Check Stock

Raspberry Pi 3 B+ Aluminum Case with Housing Heat Dissipation, Metal Case / Enclosure with Heatsink Pillar for Raspberry Pi 3 Model B Plus / 3B

High Quality Heat dissipation Aluminum Material..
Compatible with Raspberry Pi 3 B+ / Raspberry Pi 3 Model B, NOT INCLUDE Raspberry Pi 3 board..
Whole Case Heat Dissiaption Design with Heatsink Pillar to touch the Chipset on the Raspberry Pi 3 Board.
All ports and slots of the case can match with Raspberry Pi 3 B+/3B.
With screws and silicone gel pads, very easy to assembly..

Check Stock

Black Protective Case / Box / Enclosure for Raspberry Pi Model B/ 2/ 3 with Aluminum Heatsink Cooler -- Access to All Ports

Black protective box case with 3pcs Aluminum Heatsink for Raspberry Pi 3/2//B+..
Fully updated for Raspberry Pi 3.Two sets of LED ports to accomodate Pi 3 as well as Pi 2 & B+..
To protect your Raspberry Pi 2/3/B+ against damages, dust and scratches.
Easy access to all ports and slots of the Pi.Heat sink openings for both CPU and LAN chip.
Get your geek on guys or buy it for the geek you love.
give that Raspberry Pi an awesome new home with this case..

Check Stock

DIGISHUO 9 in 1 Complete Starter Kit Raspberry Pi 3 Model B Module&Two Cases&HDMI Cable&32G SD Card&Heatsink Kit&P Fan

The Raspberry Pi 3 Model B is the third generation Raspberry Pi.
This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B.
Whilst maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi..
Additionally it adds wireless LAN & Bluetooth connectivity making it the ideal solution for powerful connected designs..
With other part will be a complete kit include sd card/adapter/case/hdmi cable/heatsink.

Check Stock

Geekworm Raspberry Pi 4 Armor Case with Dual Fan, Raspberry Pi 4 Computer Model B Armor Aluminum Alloy Passive Cooling Case Compatible with Raspberry Pi 4 Model B Only

Geekworm Raspberry Pi 4 armor case with dual cooling fan, aluminum alloy metal case specially designed for the Raspberry Pi 4 Computer Model B (1GB/2GB/4GB/8GB).
All ports and slots of the aluminum alloy case can match with Raspberry Pi 4 Model B computer perfectly.
Open case design, don't need to worry about affect wifi signal.
Dual Fan - Low Power Consumption Design, Dual Cooling Expericnce, More powerful heat dissipation.
With 2 or 3 pieces thermal pads (the thickness is only 0.5mm) to touch the shell body to dissipate heat. You can also use the CPU grease (not included) to get better heat dissipation. Note: If you think the blue Thermal Tape is not good enough for heat dissaption, you can replce it with thin 0.5mm cooper heatsink match with silicone grease (recommend Shin-Etsu Shin-tsu X-23-7921-5) for better heat dissaption..

Check Stock