ReviewsRaspberry Pi B Kit

Enokay Case for Raspberry Pi 2 Model B B+ Raspberry Pi 3 Model B B+ Case Black

  • This protective case is designed specifically for the Raspberry Pi 2 Model B B+ and Raspberry Pi 3 Model B B+.
  • The case is a two-piece injection-moulded and made of ABS Material.
  • It provides the best available protection/accessibility for the Raspberry Pi 2 Model B B+ and Raspberry Pi 3 Model B B+.
  • This cas is easy to install and has good ventilation.
  • Raspbery Pi 3 or Raspberry Pi 2 model B was not included.
Check Stock

Heatsink Heat Sink + External Cooling Fan Kit for Raspberry Pi Model B B+ B Plus 2 3 3+ Geekstory(2 Pack)

  • The heatsink and cooling fan work with Raspberry Pi Model B B+ 2 3. It also can be used for the newest Raspberry Pi 3 Model B+.
  • It can not work for Raspberry pi zero, because there is no pin header on zero.
  • Large heatsink size : 14mm * 14mm * 7mm, small heatsink sizel: 9mm * 9mm * 5mm.
  • You will receive 2pcs large heatsink + 2pcs small heatsink + 2pcs cooling fan.
  • This kit is used for Raspberry pi development board and other electronic chip auxiliary cooling .If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check Stock

Arducam 16MP Autofocus Quad-Camera Kit for Raspberry Pi, 16MP IMX519 Autofocus Synchronized Raspberry Pi Camera, Compatible with Nvidia Jetson Nano/Xavier NX

  • Designed for Raspberry Pi Camera: This Quad- Camera kit allows you to connect four 16MP IMX519 raspberry pi cameras to a single standard pi board and capture images or video at the same time..
  • Four in One: Combine four cameras into one frame, each with a resolution of 1/4.
  • the maximum output you can get: 4656 x 3496 for still images and 1920x1080 for video. Please note the frame rate for video and still images will drop to half the frame rate you would normally get with a single camera..
  • Wide compatibility: It is compatible with the latest Raspberry Pi camera software (libcamera) and uses the official Pi camera tuning algorithm. It also supports multi-platform multi-camera solutions such as Raspberry Pi, Jetson Nano, Xavier NX and many more. And this Camarray HAT is also compatible with Raspberry Pi 3 and Raspberry Pi (V1/V2/HQ) cameras..
  • Applications: Multiple camera processing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Raspberry Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …) before investing in an expensive video multiplexer hardware..
  • Please note: The cameras in the set are specifi....
Check Stock

Dorhea for Raspberry Pi 3 b+ Display 3.5 inch TFT LCD Screen Kit, 3.5'' 480x320 Resolution TFT Touch Screen Moudle with Protective Case Touch Pen Heatsinks for Raspberry Pi 3 B+,Pi 3 B, Pi 2, Pi Zero

  • 3.5 inch HD touch screen designed for Raspberry Pi 3B 2B/B+/A+ /A/B Zero, 320*480 resolution, better display with TFT LCD Display touch screen panel, No external power supply needed.
  • Raspberry Pi Case : Protective case design for Raspberry Pi 2 model B and Raspberry Pi 3 model B,protects your raspberry from scratches and damage, this case is easy to install and has good ventilation.
  • Copper & Aluminum Heatsink : 3 Copper & Aluminum heatsinks make sure your pi works stable,size perfectly matched with paspberry pi ,heatsink to cooling down CPU ,LAN ,VRAM, VGA, RAM, IC Chips, MOSFET SCR, Southbridge ,Northbridge etc.
  • Compatible With : Suitable for Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ . Access to all controls and features.
Check Stock

Argon NEO Case with Raspberry Pi 4 4 Gig Kit | 32 Gig SD Card | Micro HDMI to HDMI Cable | Type-C Power Supply | Quick Start Guide for Raspberry Pi 4

  • Comes with the Raspberry Pi 4 Model B (4 Gig Variant). Keep your Raspberry Pi 4 cool with a pair of heatsinks readily available..
  • Includes micro HDMI to HDMI cable to easily connect the Raspberry Pi to any HD monitor..
  • An 18 watts Type-C power supply is also in the kit to provide the power the Raspberry Pi needs..
  • Enjoy using your Raspberry Pi 4 immediately with the Micro SD Card that has NOOBS installed..
  • Keep your Raspberry Pi 4 safe and protected with the Raspberry Pi 4 Compatible Case..
Check Stock

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

  • Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
  • Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
  • Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
  • Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
  • Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock

Sipytoph 37 in 1 Sensor Kit,37 Sensors Assortment Modules Starter DIY Kit with Box for Arduino Raspberry Pi 4 Pi 3,3B,,RPi A,Model B,B,

  • This sensor kit includes 37 sensor modules for you to learn basic knowledge about Raspberry Pi and sensors..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic..
  • Professional 37-in-1 Sensor Module Kit, Not only compatible for Arduino, but also compatible for Raspberry Pi 3,3B+,RPi A,A+,Model B,B+,2..
  • The highest cost performance kit for electronic hobbyist and advanced learners to expand Raspberry Pi and for Arduino programming..
  • With a detachable lattice plastic storage box, it is very easy to store and carry..
Check Stock

JBtek Jet Black Case for Raspberry Pi 3 Model B & Raspberry Pi 2 Model B - Access to All Ports

  • This is a no-nonsense protective case designed specifically for the Raspberry Pi Model B+ and Raspberry Pi 2 Model B.
  • The case is a two-piece injection-moulded ABS enclosure that snaps together around the Raspberry Pi Model B+..
  • It provides the best available protection/accessibility for the Raspberry Pi Model B+ and Raspberry Pi 2 Model B.
  • Full access to USB, ethernet and side ports.
Check Stock

The Bird [Explicit]

  • Generic USB controller, this uses a standard USB port, if your program or application accepts USB controller input, it can be used natively without drivers or patches, JUST PLUG AND PLAY! Cord is approx. 5.9 ft. long. Super sensitive buttons for precision control. Third party controller, not original N64 controller..
  • Supported Device (With USB storage device): PC, Notebook Computer, Laptop Computer.
  • Raspberry Pi (RPI, Raspberry pie): Raspberry Pi 1 Model B, Model A, Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi 2, Raspberry Pi 3 Model B, Raspberry Pi 3, Retro Pie. --- Note: NOT SUPPORT Android TV BOX..
  • Supported Operating system: Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • Retrogaming operating systems: RetroPie, Recalbox, Happi Game Center, Lakka, ChameleonPi, Piplay.
  • Please Note: DO NOT SUPPORT ANDROID TV BOX, C64(Commodore 64), Google Chromebook, Amazon Fire TV. Do not support ONLINE games..
  • Reliable Warranty: 100% Money Back Guarantee.
  • hassle free 12-month replacement warranty with friendly and professional customer service..
Check Stock

Geekworm Raspberry Pi Hdmi-in Module, Hdmi to CSI-2 C779, Hdmi inpute TC358743 Supports up to 1080p25fps Compatible with Raspberry Pi 4B/3B+/3B/Pi Zero/W/2W

  • 【User manual】Refer to our WiKi search(HDMI_TO_CSI-2).
  • 【Overview】This is a Raspberry Pi Hdmi to CSI-2 Module with Toshiba TC358743XBG chip, Hdmi-input supports up to 1080p25fps..
  • 【Compatibility】Compatible with Raspberry Pi 4 Model B, Raspberry Pi 3 Model B+/3B, Raspberry Pi 3 Model A+, Raspberry Pi 2 Model B,Raspberry Pi 1 Model B+, Raspberry Pi Zero, Raspberry Pi Zero W, Raspberry Pi Zero 2W...
  • 【Packing List】 ✔1 xHdmi-to-CSI-2 C779 ✔2 x FFC Cable(15cm/5.91inch length).
Check Stock

2 Pack Wired USB Controller Gaming Joystick for SNES Game pad for Windows PC MAC Computer Raspberry Pi Sega Genesis emulator

  • ♥ Supported Operating system:for Windows 98, ME, Vista, 2000, 2003, XP, 7, 8, 8.1, 10.
  • for Linux UBUNTU, for Linux Mint, for Android Linux (via an USB OTG cable).
  • ♥ Supported Device (With USB storage device):for PC, Notebook Computer, Laptop Computer.
  • for Android Smartphone: connect via an USB OTG cable.
  • for Raspberry Pi (for RPI, Raspberry pie):for Raspberry Pi 1 Model B, Model A, for Raspberry Pi 1 Model B+, for Raspberry Pi Zero, for Raspberry Pi 2, for Raspberry Pi 3 Model B, for Raspberry Pi 3,for Retro Pie. --- Note: NOT SUPPORT for Android TV BOX..
  • ♥ Buttons: D-pad, Start, Select , A ,B,X,Y.
  • ♥ USB 2.0 port game controllers , plug and play, no addition software..
  • ♥ Package included: 2 X Game Controller Gamepad as images display.
Check Stock