ReviewsRaspberry Pi B Power Supply

NulSom Inc. 40p to 40p GPIO Ribbon Cable for Raspberry Pi 4/3 / Zero / 2 (8" 20cm)

4 layer Raspberry Pi 3 B+ Case - Specially designed for the 2018 new version Raspberry Pi 3 Model b+, and compatible with Pi 3B 2B (Not include Pi Board).
Fans & Heatsinks Cooling - With DC 5V quiet fan and a set of Aluminum heatsinks to keep raspberry pi cool..
Easy to access to all GPIO ports - 4 layers Acrylic case allow you use all ports of pi and won't block signal and perfectly protect your pi components..
Convenient to turn on/off pi - Power Cable w/ on off switch button, easy to press button to power on your pi..
Easy to install with Instruction manual. Package include: 4 layer dark brown Case, 4pcs rubber feet, 3pcs Aluminum Heatsinks, 1pc Power Supply Adapter(5V/2.5A , Cord length: 59 inch), 1pc Mini Fan and 1pc Phillips Screwdriver..

Check Stock

Smraza Case for Raspberry Pi 4 Model B, Pi 4B Case with Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply, USB Card Reader, 6 Feet Micro HDMI Cable, 7.8 Inch Micro HDMI to HDMI Adapter Cable (4K Ultra HD)

Upgrade Raspberry Pi 4 Case - Acrylic 9 Layers Case for Raspberry Pi 4 Model B (Raspberry Pi 4 Board Not Included) with Good Appearance. It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot..
Pi 4 Case with Better Cooling System - Raspberry pi 4 quite cooling fan and 4 pcs aluminum heat sinks are good for heat dissipation of Raspberry Pi board..
Raspberry Pi 4 Power Supply with ETL Certification - ETL LISTED 3A USB-C power supply for Raspberry Pi 4. With on/off switch, it's convenience to power on and power off your RPI 4. Input: 100-240V AC, 50-60Hz, 0.8A. Output: 5V 3A. Cable length: 59 inch..
6 feet/ 1.8 m Micro HDMI to HDMI Cable for Raspberry Pi 4 - Up to 4K Resolution. Up to 60P (Frames/Second). CEC Support. Also come with a 7.8 inch Micro HDMI to HDMI Adapter Cable..
100% Customer Satisfaction Guaranteed. If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution..

Check Stock

Vis Viva Official Raspberry Pi 4 Desktop Kit (2GB)

A full desktop computer kit! Just add one or more HDMI monitors and you are ready to go..

Check Stock

UCTRONICS PoE HAT for Raspberry Pi 4 with Case, 802.3at Power Over Ethernet Expansion Board for Pi 4 B Board, with Cooling Fan

Perfect for Pi 4: This PoE HAT can be used with Raspberry Pi 3 model B+ and Raspberry Pi 4 model B (not included). Please contact us if you received wrong pieces, we will send you a new case kit ASAP..
Higher Output Power: DC 5V (3A Max) / 12V (2A Max) via on-board terminal block.
Over-temperature Protection: The 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
Well-ventilated Case: Cut-outs for every port of Pi 4 board and PoE hat, easy to access to all ports as well as supplying well-ventilated environment..
NOTE: PSE (Power Supply Equipment) is needed to supply PoE signal to the Raspberry Pi, such as a PoE switch or injector..

Check Stock

GeeekPi Raspberry Pi 4 SATA Storage, Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD Expansion Board X825 V2.0 USB3.0 Shield (Only for Raspberry Pi 4B)

Only For Raspberry Pi 4 Model B, supports up to 4TB 2.5 inch SATA hard disk drives (HDD) / solid-state drive (SSD), Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 board.
X825 Case,please refer to ASIN: B093WYWVRX.
Power supply request: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output , Please use high quality DC 5V 4A power supply, highly recommend to use ASIN: B07YJDS71K(With TUV,FCC,RoHS,CE Certifications). If you get low quality power supply to use, it may probably will damage your 2.5 inch HDD/SSD or not recognize the HDD/SSD ..
OS compatiable: All Raspberry Pi operating systems.
USB 3.1 Gen1 to SATA 6Gb/s Bridge Controller.
Package Includes:1 x X825 V2.0 Expansion Board, 1 x USB 3.1 connector ,1 x Mounting Screws Pack.
Note: The Raspberry Pi 4B board and the 2.5" SATA HDD/SSD are Not Included.

Check Stock

RJ45 GPIO Pinout Breakout Board for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 3A+ 4B Zero-W

8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
2x20pin expansion pin header, pin height 10mm/0.39".
Packing list: 1x RJ45 breakout board, 4x brass standoffs, 8x M2.5x6 screws, 8x pin jumpers. (the item not include Raspberry Pi, RJ45 cable and plug).

Check Stock

Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB

Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..

Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
Cool your Raspberry Pi 4 without fans and noise..
【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.

Check Stock

CanaKit Raspberry Pi 4 Extreme Kit - 128GB Edition (1GB RAM)

Includes Raspberry Pi 4 1GB Model B with 1.5GHz quad-core CPU (1GB RAM).
Includes Pre-Loaded 128GB Samsung EVO+ Micro SD Card (Class 10), USB MicroSD Card Reader.
CanaKit Premium High-Gloss Raspberry Pi 4 Case with Integrated Fan Mount, CanaKit Low Noise Bearing System Fan.
CanaKit 3.5A USB-C Raspberry Pi 4 Power Supply with Noise Filter, Set of Heat Sinks, Set of 2 Micro HDMI to HDMI Cables - 6 foot (Supports up to 4K 60p).
CanaKit USB-C PiSwitch (On/Off Power Switch for Raspberry Pi 4).

Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..

Check Stock

Argon NEO Case with Raspberry Pi 4 4 Gig Kit | 32 Gig SD Card | Micro HDMI to HDMI Cable | Type-C Power Supply | Quick Start Guide for Raspberry Pi 4

Comes with the Raspberry Pi 4 Model B (4 Gig Variant). Keep your Raspberry Pi 4 cool with a pair of heatsinks readily available..
Includes micro HDMI to HDMI cable to easily connect the Raspberry Pi to any HD monitor..
An 18 watts Type-C power supply is also in the kit to provide the power the Raspberry Pi needs..
Enjoy using your Raspberry Pi 4 immediately with the Micro SD Card that has NOOBS installed..
Keep your Raspberry Pi 4 safe and protected with the Raspberry Pi 4 Compatible Case..

Check Stock