ReviewsRaspberry Pi Backup Camera

Vilros Raspberry Pi Zero- Zero W Compatible Case (Black)

Features 3 Covers, Sealed Open GPIO and Camera Module Compatible.
Includes a 40mm Raspberry Pi Zero / Pi Zero W Compatible Camera Cable and 2×20-pin Strip Dual Male Header.
Case ONLY Does NOT include Raspberry Pi Board Or Cables.

Check Stock

Arducam Raspberry Pi Camera Module 3 Wide, 120°(D) IMX708 Autofocus Pi Camera V3 with Acrylic Case, 15cm 15-22 Pin FFC Cable

Compatible with all Raspberry Pi boards: Raspberry pi camera v3 works with all Raspberry Pi models, 4B/3B, Pi Zero W/2 W..
Based on IMX708 sensor with HDR, 4608 x 2592 is the highest resolution you can get for still images, 1080p50 max for video..
The autofocus of pi cam v3 is achieved by a mixture of PDAF and CDAF, ensuring crisp and clear images..
Fully support libcamera and Picamera2, and uses CSI-2 serial data output with 2-wire serial communication for seamless integration..
Come with a 15cm 15-22pin camera cable, especially for Raspberry Pi zero 2 w.
also an acrylic camera case included, easily mount on any tripod with 1/4"-20 mounting screws..

Check Stock

Arducam 16MP Camera for Raspberry Pi, IMX298 Programable Motorized Focus Pivariety, Compatible with Raspberry Pi ISP and Gstreamer Plugin

Major Breakthrough: Arducam Pivariety series not only breaks the limitation of the Raspberry Pi camera’s resolution and sensors, but also supports hardware ISP functions like AEC/AGC, etc. In other words, with Pivariety, you can get higher resolutions with the same decent image quality as the Official cameras. NOTE: The newest version C doesn't come with a camera adapter board, you can directly connect to raspberry pi to use...
Still Image: This camera module adopts the IMX298 sensor for 16MP higher resolution than 12.3MP IMX477 Raspberry Pi High Quality Camera.
ISP output image format of JPG, YUV420, RAW, DNG..
Capture Video: supports frame rates 4640×3472@10 fps, 2320×1732@20 fps, 3264×2464/3840×2160@15 fps, 2592×1944@20 fps, 1920×1080@30 fps, 1280×800@45 fps, 1280×720@50 fps.
ISP output video format of MJPEG, H.264..
Focal length: 4.04mm, can be adjusted via programmable focus control.
Compatibility: supports Raspberry Pi 4, Pi 3/3B+/3A+, and other A & B models(Except Raspberry Pi 2B and Zero). Compatible w/ all libcamera-based apps maintained by the RPi foundation, like Gstreamer, OpenCV etc. NOTE: Pivariety can only work with libcamera instead of raspistill appl....

Check Stock

Pi Camera Arducam Octoprint Octopi Webcam Monitor 3D Printer 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi

5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards.
Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects.
100cm/3.28ft extension cable included, long enough for mounting the camera, especially useful when you don’t want to place the camera near the....
Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement.
Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series. Cable for Pi zero is not included. Search ASIN B087FDJ2RP to get 100cm....

Check Stock

Arducam Mini Raspberry Pi HQ Camera, 12MP IMX477 with Low Distortion M12 Lens, 25*24mm Camera Board Compatible with Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

High Quality Camera: This camera adopts 1/2.3″ 12 Megapixel IMX477 sensor for sharp image, max. still resolution 4056 x 3040, frame rates 1080p30, 720p60 and 640 × 480p60/90..
Mini Sized HQ Cam: The IMX477 camera has the same size (25*24mm) and mounting holes as the Raspberry Pi v2, but with better resolution (12 megapixels compared to 8 megapixels) and sensitivity (about 50% more area per pixel for improved low-light performance) than the camera module v2..
More Than Ultra HD: Come with an interchangeable M12 lens with a FOV of 75°(H), low distortion, which can capture UHD images while maintaining reality. For more lens kit, you can search for the ASIN:B096V2NP2T to check it out..
Wide Compatibility: The IMX477 camera module is not only compatible with Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which need a simple configuration according to the manual before use. The package comes with 1 pcs 150mm/12inch 15pin to 22pin camera cable and 80mm/3.1inch 22pin camera cable..
Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).

Check Stock

SmartiPi Touch 2 - Case for The Official Raspberry Pi 7 Touchscreen Display - with Cooling Fan

Works with Official 7" Pi display and Raspberry Pi B+,2B,3B,3A+,3B+, and 4.
Mounting point for Raspberry Pi official camera V1,V2. Not compatible with HQ camera..

Check Stock

Geekworm Raspberry Pi Zero 2 W 18650 UPS Expansion Board X306 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Raspberry Pi Zero..
【One-Cell 18650 UPS HAT】Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W, Max 5.1V 4000mA Power Backup with 18650 single cell battery holder.
【3-Port USB HUB】On-board three USB 2.0 Ports.
Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
【How to Power】Power via USB Type-C 5V Power In port of X306.
(Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
【Packing List】1 x X306 V1.1 Expansion Board.
Note: not inlcude Raspberry Pi board,18650 battery, GPIO Header & power adapter..
【User Manual】Installation guide and user manual refer to Geekworm WiKi search X306..

Check Stock

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..

Check Stock

BIGTREETECH Octopus V1.1 32Bit Control Board + TFT35 E3 V3.0 Touch Screen+ 8PCS TMC2209 v1.2 Stepper Motor Driver DIY Voron 3D Printer Controllers for Raspberry Pi Model

5MP camera module for 3D printer projects with Raspberry Pi, natively compatible with the official Raspberry Pi camera modules and motherboards.
Used on OctoPi, Raspbian, MotionEye for 3D printer monitoring, surveillance camera or other Pi cam projects.
100cm/3.28ft extension cable included, long enough for mounting the camera, especially useful when you don’t want to place the camera near the....
Work on raspicam commands and python scripts as you would expect for a new project or drop-in replacement.
Package includes 2 flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series. Cable for Pi zero is not included. Search ASIN B087FDJ2RP to get 100cm....

Check Stock

Arducam Pi Camera for Octoprint Octopi Webcam with Motorized Lens, Adjustable Focal Length for Monitoring 3D Printer, 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi

Hassle Free: Works as a native Raspberry Pi camera on Raspberry Pi 4/3B+/3 and more, and Arducam has solved the problems with the installation and setup on OctoPi. NOTE: Before using the camera normally, you need to do some simple script configuration to make the camera work!.
Motorized Focus: See closer and easier than the fixed focus (1 m to infinity) lens, the minimum focal length is about 5CM, which is better to monitor the 3D printer nozzle and make you pay close attention to your creation..
Focus Controllable: A camera focus control plugin has been developed to control an Arducam motorized focus camera using the OctoPrint Control tab, which utilizes custom commands from your slicer to adjust focus while printing..
A Long Cable: 100cm/3.28ft extension cable included, long enough for mounting the camera, especially useful when you don’t want to place the camera near the Raspberry Pi..
Package Contents: 1pcs 5MP motorized focus camera module, 2pcs flex ribbon cables (15cm/100cm) for Raspberry Pi A&B series, and manuals..

Check Stock

DORHEA 5PCS Raspberry Pi 4 Camera Video Module 5 Megapixels 1080p Sensor OV5647 Mini Webcam with 15 Pin Ribbon Cable for Raspberry Pi Model A/B/B+, Pi 2B and Raspberry Pi 3B, Pi 3 B+, Raspberry Pi 4

Camera Specifications -- The high-definition video camera is capable of 2592 x 1944 pixel static images,and also supports 1080 p @ 30 fps, 720 p @ 60 fps and 640 x480 p 60/90 video recording, with 5MP OV5647 1080p webcam sensor..
Fixed Focus -- The sensor has a native resolution of 5 megapixel with OV5647 sensor in a fixed-focus lens..
Compatible With -- High-Definition video camera for Raspberry Pi Model A, B, B+, Raspberry Pi 2 B, Raspberry Pi 3,3 B+ ,Pi 4..
CSI Interface -- This interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor, high data rates, and it exclusively carries pixel data..
15 Pin Ribbon Cable -- 15-pin MIPI camera serial interface - plugs directly into the Raspberry Pi board.
The camera module size: 25mm×24mm×9mm, making it perfect for mobile, you can be applied to image recognition and image tracking, etc..

Check Stock