ReviewsRaspberry Pi Case For Cooling

Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB

Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..

Check Stock

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano

Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry....

Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..

Check Stock

MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi GPIO 3.5 inch Display

Installation instructions video: Please get the link from the product description below. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!.
Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!).
Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging..
With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don't need to open the cover. This case is easy to install and has good ventilation..
With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera.

Check Stock

GeeekPi New Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (12-Layers)

Wide Application --- The new 12-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberr....

Check Stock

iUniker Raspberry Pi Cluster Case, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Pi 3 B, Pi 2 B, Pi B+ (4 Layers-Brown)

Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
Compatible With Current Raspberry Pi’s including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
With Quiet Cooling Fan, it can drop the temps for your Pi.
Include Raspberry Pi Heatsink, Better Cooling Experience.

Check Stock

Raspberry Pi 4 Cluster Case, iUniker Raspberry Pi 4 Case with Cooling Fan and Raspberry Pi 4 Heatsink for Raspberry Pi 4 Model B, 3 B+, Pi 3 B, Pi 2 B, Pi B+ (4-Layers)

Complete Stackable Clear Acrylic Case Kit for Up To Four Layers.
Compatible With Current Raspberry Pi's including Pi 3 B+, Pi 3 B, Pi 2 B, Pi B+.
Our iUniker Raspberry Pi Case is open on all sides with each acrylic layer containing a built in air vent to allow for maximum air flow for each Raspberry Pi.
With Quiet Cooling Fan, it can drop the temps for your Pi.
Include Raspberry Pi Heatsink, Better Cooling Experience.

Check Stock

Treedix 3.5 inch TFT Touch Screen Module 320x480 Resolution LCD Display Compatible with Raspberry Pi 4B/3B/3B+ with Touch Pen ABS Case and Cooling Fan Compatible with Raspberry Pi 4B

The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen installed. The ABS case is specially designed for Raspberry Pi 4 Model B only..
The 3.5 inch LCD touch screen has 480 x 320 resolution, with resistive touch control.
The LCD touch screen can use GPIO interface for power supply.
The LCD screen has a 2-pin interafce for connecting the cooling fan, which can allow the screen and cooling fan both working at the same time..
The LCD touch screen is suitable for Raspberry Pi 4B/ 3B/ 3B+ versions. When used for Pi 4B, it can support for Raspbian system, for kali Linux system. When used for 3B/3B+, it can support for Raspbian system, for ubuntu system ,for kali Linux system..
The case features an easy-to-install split design that protects your PI computer and screen, as well as a cooling fan mounted on an aluminum stand and a hot silicon pad for cooling the chip to keep the PI computer and screen cool..

Check Stock

Geekworm Raspberry Pi 4 Aluminum Case, Raspberry Pi 4 Model B Heavy Duty Passive Cooling Metal Case/Housing with Heatsink Pillar for Raspberry Pi 4B Only-Black (P173)

Geekworm Raspberry Pi 4 passive cooling aluminum case - P173 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
Design with good heat dissipation, passive cooling design, net weight up to 184 grams, don't need to install the cooling fan or heatsink, this is a heatsink case..
Access to all ports of Raspberry Pi 4 Model B, GPIO cable interface is reservered, support to install the gpio cable..
Made of high quality aluminum material. Equipped with a copper heatsink to replace the thermal pad at the CPU part, and attach proper silicone grease (not included) on two sides of copper heatsink to get better heat dissipation.
Reserve the TF Card slot for easy access..
Note: The Raspberry Pi 4 Model B is not included in the packing list. for Raspberry Pi 4 PSU: Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..

Check Stock

RETROFLAG PiStation CASE, Raspberry Pi 4 Case with 800x480 Pixel 4.3 inch LCD Monitor Display Screen, Stereo Speaker, Cooling Fan and 3pcs Heatsinks for Raspberry Pi 4 Model/Pi 4B (Pi 4 Case)

【Raspberry Pi Monitor】 Retroflag PSOne Pi 4 CASE is upgraded version, specifically designed for Raspberry Pi 4 Model B, NOT compatible with other Raspberry Pi model. 4.3 inch Raspberry Pi monitor equipped with IPS screen and HD 800x480 pixel high resolution..
【Safe Shutdown and Reset】 This is Retroflag Pi 4 CASE version with Safe Shutdown and Safe Reset function. It will be more safe for your SD card when shutdown and reset..
【Easy to Assemble & Access】 Pi 4 CASE offers your Raspberry pi good protection with ONLY few steps to assemble, you can access to all ports of Raspberry Pi 4 Model B, such as power, audio, USB, LAN, MicroSD Card Storage, and Micro HDMI connector without opening the CASE..
【Original PS One Console Style】We created this RETROFLAG Pi 4 case applying the most iconic element in the retro game world as a homage to the most classic console ever made, this Pi 4 case can make your Raspberry Pi 4B become a NES retro gaming machine in one second! Designed the CD-ROM drive for storing your SD cards in the appearance of a game cartridge..
【Strong Heat Dissipation】RETROFLAG Pi 4 Case is equipped with a quiet cooling fan and 3pcs heatsink with better heat dissipation, could prevent system failure and Raspberry Pi 4B from o....

Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....

Check Stock