ReviewsRaspberry Pi Pico Wifi

Treedix Compatible with Raspberry PI PICO Breakout Board Flexible PCB Shield Board with Pin Header

  • This breakthrough board is specially made for Raspberry Pi Pico, with additional pin headers, which are fully compatible with the board.
  • The pin header and the breakthrough board are not welded, just insert pico after the welding is successful.
  • The breakthrough board is gold-plated on both sides and holes are plated, and the material of the PCB board is excellent.
  • The breakthrough board is equipped with Raspberry Pi pico, which is convenient for users to develop and integrate flexibly.
  • Note: The package does not include Raspberry Pi pico. This product needs to be assembled and welded by itself.
Check Stock

BTT SKR Pico V1.0 3D Printer Control Board with TMC2209 Stepper Drive Onboard A Motherboard Specially Customized for VORON V0 V0.1 3D Printer Suitable for Raspberry Pi Using Kilpper Firmware

  • 【VORON V0 V0.1 customized motherboard】BIGTREETECH SKR PICO control board is specially made for VORON 3d printer, using Raspberry Pi (Raspberry Pi)....
  • 【Silent printing, noise reduction】 SKR PICO V1.0 has onboard TMC2209 silent stepper driver, UART mode, no external driver required, easy to use.....
  • 【Heat dissipation upgrade】 BTT SKR PICO V1.0 adopts a new design heat sink to enhance heat dissipation and aesthetics.
  • 【New design:】SKR PICO SMD capacitor (MLCC) adopts Murata capacitor.
  • fuse is in the form of fuse holder + fuse, which is easy to disassemble.
  • 【Temperature sensor interface】 TH0, THB, 2-way 100K NTC (thermal resistance) and Raspberry Pi (Raspberry Pi) communication interface: TYPE-C,....
Check Stock

Treedix Compatible with Raspberry Pi Pico GPIO Expander External Expansion Board with Two Sets of 2x20 Male Header for Connecting More Expansion Modules

  • Based on the Raspberry Pi Pico interface design, it can be directly inserted and used after soldering the header, or it can be connected through the row of wires.
  • Extend 2 sets of 2x20 pin headers,easy access to multiple Raspberry Pi pico expansion boards for various experiments.
  • There is a clear lead-out label on the front, which is easy to use. High-quality breadboard with sunken gold process.
  • The product is beautiful and practical, and can be used with Pico lcd, Pico-UPS-A.
  • This interface extension board is suitable for Raspberry Pi pico series motherboards.
Check Stock

Treeidx 3pcs Expansion Board Breadboard Gold Plated Finish Proto Board PCB Compatible with Raspberry PI PICO

  • This breakout board is specially made for Raspberry Pi pico.
  • The gold-plated surface can prevent oxidation, high-quality gold-plated surface, easy to weld.
  • All holes have been electroplated to increase the strength..
  • The breakout board is equipped with Raspberry Pi pico, which is convenient for users to develop and integrate flexibly.
  • The package does not include the Raspberry Pi pico, you need to configure it yourself..
Check Stock

Ingcool Raspberry Pi Pico Microcontroller Board with Pre-soldered Header Low-Cost, High-Performance,Based on RP2040 Chip, Dual-core Arm Cortex M0+ Processor,Flexible Clock Running up to 133 MHz

  • Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces..
  • Raspberry Pi Pico Board incorporates Raspberry Pi's own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board Flash memory, as well as 26x multi-function GPIO pins..
  • For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available..
  • There're also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly..
  • This is a Raspberry Pi Pico with Pre-soldered Header,it is easier to connect with another items..
Check Stock

Waveshare Overall Evaluation Board Designed for Raspberry Pi Pico Misc Onboard Components for Easily Evaluating The RP2040

  • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards. 3.5inch resistive touch screen, 65K colorful, bringing clear and vivid display effect.
  • Standard 3.5mm audio jack, for headphone or other audio peripherals. Micro SD card slot through the SDIO interface, faster access speed than SPI interface.
  • Integrates battery header and recharge circuit, allows it keep running without wired power supply.
  • Other rich resources like buzzer, photoresistor, and RGB LED....
  • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples).
Check Stock

GeeekPi Raspberry Pi Pico Breakout HAT Board, Raspberry Pi GPIO Expansion Board Breakout HAT Module for Raspberry Pi Pico, Support Raspberry Pi HAT Board with 40Pin Pin Header

  • Application: This breakout HAT board, which is specially customized for Raspberry Pi Pico..
  • Convenient: Solve the problem that the Raspberry Pi Pico silk screen is covered, and providing pin header pins, which is convenient for users to build their own DIY circuits..
  • Features: Support Raspberry Pi HAT board with 40Pin Pin Header.
  • For example: GeeekPi DockerPi series HAT board, 4-channel relay HAT board, SensorHub board, etc. It Provides a good bearing platform.
  • Package Includes: 1 x Breakout HAT Board For Raspberry Pi Pico.
Check Stock

sb components Raspberry Pi Pico 1.28” Round LCD HAT, 1.28inch LCD Display Module for Raspberry Pi Pico 65K RGB Colors 240×240 Pixels with SPI Interface

  • 1.28" round LCD display for raspberry pi pico.
  • 240×240 resolution, IPS screen, 65K RGB colors, clear and colorful displaying.
  • Onboard female pin header for direct attaching to Raspberry Pi Pico.
Check Stock

waveshare RP2040-Plus Mini Board High-Performance Pico-Like MCU Board Based on Raspberry Pi RP2040 Chip,Dual-core Arm Cortex M0+ Processor,USB-C Connector,Onboard 4MB Flash,Higher Current DC-DC Chip

  • 【RP2040 MCU Board Plus Version 】A Pico-like MCU board based on Raspberry Pi RP2040,Compatible With Most Of The Raspberry Pi Pico Add-On Modules.
  • 【As same as Raspberry Pi Pico】It incorporates the RP2040 microcontroller, with dual-core Arm Cortex M0+ processor running up to 133 MHz, and 26x multi-function GPIO pins..
  • 【What's different with Raspberry Pi Pico】It features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip..
  • 【C/C++, MicroPython Support】Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started.
  • 【26 × Multi-Function GPIO Pins】Configurable Pin Function, Allows Flexible Development And Integration.
Check Stock

Yahboom Raspberry Pi Pico RP2040 Microcontroller Chip MicroPython Programmable IO(1 pcs)

  • From controlling appliances to operating a light display, Raspberry Pi Pico puts the technology that underpins countless everyday operations into your hands..
  • Programmable in C and MicroPython, Pico is adaptable to a vast range of applications and skill levels, and getting started is as easy as dragging and dropping a file..
  • More experienced users can take advantage of Raspberry Pi Pico’s rich peripheral set, including SPI, I2C, and eight Programmable I/O (PIO) state machines for custom peripheral support..
  • Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with 264KB internal RAM and support for up to 16MB of off-chip Flash..
  • A wide range of flexible I/O options includes I2C, SPI, and — uniquely — Programmable I/O (PIO). These support endless possible applications for this small and affordable package..
Check Stock

Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040 Dual-core ARM Cortex M0+ Processor, 3pcs

  • 【High-Performance CPU】Raspberry Pi Pico features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. With 264KB of SRAM, and 2MB of on-board Flash memory..
  • 【Rich Hardware Interface】Raspberry Pi Pico has 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels..
  • 【Custom Peripheral Support】8 × Programmable I/O (PIO) state machines for custom peripheral support.
  • 【Build Project in Tiny Size】Only 2.1cm*5.1cm ( as small as your thumb). Pico has been designed to use either soldered 0.1" pin-headers or can be used as a surface-mountable 'module'.
  • 【Multiple Software Support】Pico comes with corresponding C/C++ SDK, Micropython SDK resources.
Check Stock