ReviewsRaspberry Pi Portable Case

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano (8-Layers)

  • Wide Application --- The new 8-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry Pi 3B+/3B/2B/B+..
Check Stock

Miuzei Case for Raspberry Pi 4, Raspberry Pi 4 B Case with Fan 30mm, Pi 4 Model B 5V 3A Type-C Power Supply for Pi 4 B case, 4 pcs Aluminum Heatsinks Support Rpi 4B 8gb/4gb/2gb (No Raspberry Pi board)

  • ▶【Newest Raspberry Pi 4 Case】9-layer Acrylic Board With Good Nisibility. Miuzei Raspberry Pi 4B Case Perfectly Protects Your Pi 4 Board. You Can Check The Running Status of The Pi Board at Any Time as Well.
  • ▶【Accurately Access All Ports】Miuzei Raspberry Pi 4 Model B Case Layered Design Reserves Enough Space for Pi 4 Model B So That Users Can Access All Ports Without Barriers.
  • ▶【Advanced Cooling System】Raspberry Pi 4 Case with A Fan (35mm). Large Fan Has Better Heat Dissipation Performance Than Regular. Heatsinks Assists Raspberry Pi 4 To Heat Dissipation and Quickly Cool Pi 4 B CPU, GPU and RAM.
  • ▶【5V 3A Type-C Power】Miuzei Raspberry Pi 4 B Case with A Power Supply Which 5V 3A Type-C Port and Has ETL Safety Certification. Pi 4 Power Supply Length 5 ft (1.5m) Without Risk of Overcurrent and Overvoltage.
  • ▶【12-month Guaranteed】Miuzei’s Customers Can Get 12-month Warranty Service and Lifetime Technical Support. Any Doubt Just Reach Miuzei Team via Amazon Email or Support Email..
Check Stock

Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Check Stock

Eyoyo 7 inch Monitor, 7\ IPS Panel 1024x600 5-Points Capacitive Touchscreen Portable Raspberry Pi Monitor Screen Mini HDMI Monitor for Raspberry pi/Laptop/PC/Game Console

  • ...ss. It is made of HD IPS panel has a full viewing Angle of 178 degrees. It displays vivid color realistic pictures from all angles without color bias. The 5-point capacitive touch screen can respond quickly in 3-5ms, no matter whether you click the screen or swipe the page, there will be no stutters or tears..
  • 【7 "Raspberry Pi Screen】 - This monitor is designed for Raspberry Pi enthusiasts, it has a mini HDMI port and micro HDMI adapter, supports most of the Raspberry PIs on the market, Raspberry Pi 4/4b/3/3b/3b/Raspberry Pi zero and more. Plug and play, driver free. The capacitive touch screen allows you to click or swipe any time, which is perfect for Raspberry Pi DIY enthusiasts..
  • 【Small Single Board Monitor】 - This single board monitor has wide compatibility and supports all kinds of pi, banana pi, Rock pi, BB Black, Raspbian, Kali Linux, Ubuntu, Kodi, Win10 IOT. Supports Windows 7/8/10/11 and other systems, driver free. In addition, it supports major consoles such as PS4, XBOX360, Switch and TV box, which is a powerful small portable monitor..
  • 【7 inch Second Monitor for PC】- This monitor has copy mode, extended mode and single board display mode for choose from, it can be easily connected to a PC or laptop, 7 inch mini size to save spac....
Check Stock

Vilros Raspberry Pi 4 Compatible Use and Store Case with Preinstalled Fan (Black)

  • VILROS PI 4 COMPATIBLE USE AND STORE CASE: Plastic Storage case is best for those who want to be able to store their raspberry pi in a convenient all in 1 package when not in use.
  • USE YOUR PI: Case Holds the Pi with full access to all the ports, in addition you can open the cover and access the GPIO pins for any project.
  • STORE YOUR PI AND ACCESSORIES :The case has enough room to store the power supply, cables and other pi essentials etc..
  • KEEP YOUR PI COOL: The case features a preinstalled fan on the cover that can easily be hooked up to the Raspberry Pi for maximum cooling and ventilation.
  • EASY TO SET UP: Includes a EBOOK download code for the Vilros Raspberry Pi Quickstart Guide 2nd Edition (Updated for Pi 4) --also includes a screwdriver, screws and clear instructions for assembly..
Check Stock

RasTech Raspberry Pi 3 Model B Starter Kit with 32GB Micro SD Card, Power Supply with ON/Off, Case, Micro SDHC Card, Cooling Fan, HDMI Cable, Network Cable, Heatsinks, Card Reader, Screwdriver

  • Geekworm Raspberry Pi 3B+/3B passive cooling aluminum case is designed for Raspberry Pi 3 Model B Plus and Raspberry Pi 3 Model B..
  • Design with good heat dissipation, passive cooling design, net weight up to 207 grams, don't need to install the cooling fan or heatsink.
  • Access to all ports of Raspberry Pi 3 Model B+ or Raspberry Pi 3 Model B , GPIO cable interface and TF card slot is reservered, support to install the gpio cable and TF card..
  • Made of high quality aluminum material. with 4pcs thermal tapes to attach on your Raspberry Pi 3B+/3B. For Raspberry Pi 3B+, attach the big thin thermal tape on CPU.
  • For Raspberry Pi 3B, attach the big thickness thermal tape on CPU..
  • Note: The Raspberry Pi 3 board is not included in the packing list. Packing List: √1 x Aluminum Case for Pi3.
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Check Stock

GeeekPi Raspberry Pi Cluster Case, Raspberry Pi Rack Case Stackable Case with Cooling Fan 120mm RGB LED 5V Fan for Raspberry Pi 4B/3B+/3B/2B/B+ and Jetson Nano

  • Wide Application --- The new 4-layers cluster case is designed for Raspberry Pi clusters, Raspberry Pi NAS servers, Jetson Nano clusters, and disk array clusters to to provide shell protection and cooling solutions. It’s compatible with Raspberry Pi4B/3B+/3B/2B/B+, 2.5MM HDD, Jetson Nano (Note: Not for Raspberry Pi Zero).
  • Simple Installation --- The long fixing screws are designed with flat head screws, smooth and easy to install. The fool-proof design of the positioning holes can prevent you from having trouble during installation. A variety of screws with different specifications can meet your various product fixing needs. For example, Raspberry Pi, 2.5-inch hard drive, 3.5-inch hard drive, Jetson Nano and so on..
  • Better Cooling Effect --- With 120mm 5V RGB LED Fan for better heat dissipation.
  • This case is open on three sides with each acrylic layer containing enough space for maximum air flow for each Raspberry Pi.
  • With a large fan on one side to flow strong wind for reducing the temperature of each Raspberry Pi.
  • Good compatibility with Raspberry Pi --- It can be access to all ports of Raspberry Pi board, such as GPIO port, HDMI port, USB port, SD Card slot and so on. It’s also compatible with the latest Raspberry Pi 4 Model B and Raspberry....
Check Stock

GeeekPi Raspberry Pi Cluster Case for Raspberry Pi 4 Model B, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Raspberry Pi 3/2 Model B

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The metal protective cover on the top will protect the cooling fan against being destroyed..
  • The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The instruction manual will tell you how to assemble step by step..
  • Package Includes: 5x Acrylic Plates, 4x Cooling Fans with Metal Protective Cover, 12x Heatsinks for Raspberry Pi 3B+/3B/2B,16x Heatsinks for Raspberry Pi 4 Model B(Added on 2019.8.2), 1x Screw Set, 1x Screw Driver,1x Instruction Manual.
Check Stock

GeeekPi 6-Layers Raspberry Pi Cluster Case,Raspberry Pi Rack Case with Raspberry Pi Heatsinks Stackable Case Stack Enclosure for Raspberry Pi 4/3/2 Model B,Raspberry Pi 3 Model B+ (Clear)

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes heatsinks for cooling down your Raspberry Pi better..
  • The stackable case can provide you with an environment to put six pieces of Raspberry Pi board together..
  • Package Includes:1 x 1 Pack of 6-Layer Acrylic Cluster framework For Raspberry Pi,6 x Aluminum Heat Sink pack (For RPi 4B),6 x Aluminum and Copper Heat Sink Pack (For RPi 3B+),1 x Screw driver.
Check Stock

Enokay Case for Raspberry Pi 2 Model B B+ Raspberry Pi 3 Model B B+ Case Black

  • This protective case is designed specifically for the Raspberry Pi 2 Model B B+ and Raspberry Pi 3 Model B B+.
  • The case is a two-piece injection-moulded and made of ABS Material.
  • It provides the best available protection/accessibility for the Raspberry Pi 2 Model B B+ and Raspberry Pi 3 Model B B+.
  • This cas is easy to install and has good ventilation.
  • Raspbery Pi 3 or Raspberry Pi 2 model B was not included.
Check Stock