ReviewsRaspberry Pi Router Usb Ethernet

Smraza Raspberry Pi 4 Case, Metal Case for Raspberry Pi 4 Model B with Cooling Fan 35MM, Pi 4B Case Aluminum Alloy Enclosure with 4 PCS Heatsinks Pillar Thermal Adhesive Black (RPI Board Not Included)

Raspberry Pi 4 Case - Only compatible with Raspberry Pi 4 Model B. Access to all ports for Pi 4. Not for Pi 3B+. And RPI board not included..
Cooling System - Raspberry pi 4 case with cooling fan and built-in 4pcs thermal adhesive to tightly touch with on-board raspberry pi 4 chipset. Better for heat dissipation. Size of fan: 35 x 35 mm(If you reveive wrong size, please reaching us to get a right one.) Size of heatsinks for CPU: 25 x 25 mm..
Access to All Ports - Metal case for raspberry pi 4 can access to all ports for Pi 4. Such as the dual micro HDMI port, USB-C power connector port, Audio/Video port, USB and Ethernet ports and micro SD card slot..
High Quality Metal Material - Raspberry pi 4 fan case made of smooth and straight aluminum material, Ultra-thin design & Easy to install. Strong metal case can protect your raspberry pi 4 from scratched, dust, damaged..
Satisfaction Guaranteed - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution..

Check Stock

Smraza for Raspberry Pi 4 Case, Raspi 4B Case with Cooling Fan 35MM, 4pcs Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B RPI 4 8GB/4GB/2GB/1GB

Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy to Access All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..

Check Stock

Cable Matters Plug & Play USB to Ethernet Adapter with PXE MAC Address Clone Support Ethernet to USB 2.0 Adapter Ethernet Adapter for Laptop Supporting 10/100 Mbps Ethernet Network in Black

Ethernet USB adapter connects a computer or Raspberry Pi 3 to a router, modem, or network switch for a Fast Ethernet (100 Mbps) network connection.
Connect the USB Ethernet adapter to your laptop without an Ethernet port.
Cost-effective USB network adapter for many computer applications that only require a 100 Mbps Ethernet connection.
Use this convenient USB Lan adapter to replace a failed USB NIC or Ethernet port on an older computer.
Portable RJ45 to USB dongle weighs less than 1 ounce with a 6-inch cable tail to connect to your computer.
Wired LAN USB adapter is more secure than most Wi-Fi connections.
Feature-filled USB to network adapter supports Preboot Execution Environment (PXE), Wake-on-Lan (WoL), Full-Duplex (FDX) and Half-Duplex (HDX) Ethernet, Crossover Detection, Backpressure Routing, Auto-Correction (Auto MDIX).
Supports IPv4/IPv6 protocols in 10BASE-T and 100BASE-TX networks.
Supports MAC address pass-through (MAC clone) with the Cable Matters EZ-Dock utility software (Windows).
Driver-free Simple installation USB to RJ45 adapter for most computers.
Diagnostic LEDs on this Ethernet USB adapter verify the power, connection and data transfer status.
OS compatible Windows 11/10/8.1/8/7/Vista/XP, MacOS 10.8 and up, Chrome OS and Linux for ker....

Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..

Check Stock

YaFex Case for Raspberry Pi 4 B with Cooling Fan and Fan Guard,4 Pcs Heat Sinks,5V 3A USB-C Power Supply, USB Card Reader,1.5M Micro HDMI Cable and HDMI Adapter

【Latest Version Raspberry Pi 4 Case】Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B. Made of acrylic, the Raspberry Pi 4B case won’t block Pi’s Wifi or Bluetooth signal..
【Easy to Access to All Ports】Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
【Keep Raspberry Pi 4 Board Cooling】Specially come with quiet cooling fan and 4 pcs heatsinks for CPU/ROM/RAM quick cooling.Also included a fan guard to protect the fan..
【1.5M Micro HDMI Cable and HDMI Adapter】1.5M Micro HDMI to HDMI Cable for Raspberry Pi 4. Up to 4K Resolution. Up to 60P (Frames/Second). CEC Support. Also come with a 1.5M Micro HDMI to HDMI Adapter Cable..
【Excellent Customer Service】If you have any questions about the case installation, please feel free to contact us. We will teach you to use our products within 24 hours..

Check Stock

Plugable USB 2.0 OTG Micro-B to 100Mbps Fast Ethernet Adapter Compatible with Windows Tablets, Raspberry Pi Zero, and Some Android Devices (ASIX AX88772A chipset).

FAST ETHERNET – Add a fast wired network interface through the Micro-B USB OTG port on your Windows tablet and Raspberry Pi Zero with Raspberry Pi OS. Supports Windows 11, 10, 8.x tablets. Faster than most wireless connections.
INSTALLATION – Most Windows 11, 10 and 8.x tablets supported, and include a built-in device driver for this Ethernet adapter, and there is no need to install any additional driver. Full 10/100 Mbps Fast Ethernet performance over USB 2.0’s 480Mbps bus.
COMPATIBILITY – Limited Android compatibility. Please confirm if your Android phone or tablet is compatible before purchase. The latest compatibility details are located below. Raspberry Pi OS may need to be updated and upgraded for driver configuration.
INCOMPATIBILITY – Not compatible with all Android devices. Check our compatibility information below for more detail. Not compatible with Windows phones, devices by Amazon, LG, or Apple iOS devices (iPhone/iPad).
2 YEAR WARRANTY – We love our Plugable products, and hope you will too. All of our products are backed with a 2-year limited parts and labor warranty as well as Seattle-based email support.

Check Stock

Geekworm KVM-A3 Kit with Raspberry Pi 4 Case Compatible with PiKVM ATX HDMI CSI for Raspberry Pi 4 Model B Only(Not Include Raspberry Pi)

【What is it】This kit allows user to realize a PiKVM / KVM project with raspberry pi 4 which can control a computer using a web browser!.
【Compatiblity】for use with Raspberry Pi 4 Model B 8GB / 4GB / 2GB / 1GB only, the metal case only support Raspberry Pi 4..
【Function】Remotely turn on/ turn off / restart your computer.
reinstall the OS using the Virtual CD-ROM or Flash Drive.
Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc..
【How to Power】Power Input: 5.1Vdc +/-5% , ≥3A.
Power Via USB Type-C port of X630-A3. (DON'T power via Raspberry Pi's TYPE-C port, because it is occupied as USB OTG.) Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND)..
【Cooling Solution】X630-A3 with a on-board 3007 cooling fan for heat dissaption of Pi4.
【What Included】1 x KWM-A3 Metal Case with Accessories, 1 x X630-A3 V1.2 Expansion Board with Accessories, 1 x X630-A5 V1.0 Adapter Board with Accessories, 1 x X630 HDMI to CSI-2 Module with Accessories, 1 x Ethernet Cable(1m length), 1 x0.96 inch OLED Module.
【Extra Needed】Raspberry Pi 4, TF Card, HDMI Cable, Power Adapter.

Check Stock

MakerSpot 5-Port Stackable USB Docking Hub for Raspberry Pi Zero V1.3 (with Camera Connector) and Pi Zero W/2W (with Bluetooth & WiFi)

5 x USB 2.0 data and charging ports, a micro USB port for power input up to 2.3A consumption .
5 x electrolytic capacitors to filter electrical noise and stabilize voltage with an independent protection circuit to limit total current to 2.3A .
an RJ45 Ethernet port with Realtek RTL8152B 10/100M chip, A 3.5mm audio jack, supporting both recording and playback .
Compatible with Raspberry Pi Zero v1.3 (with Camera Connector) and Raspberry Pi Zero W / Pi Zero 2 W (with Bluetooth and WiFi) .
Raspberry Pi Zero shown in the photos is for illustrative purpose only, not included in this offer.

Check Stock

LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4

PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories..
FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments..
INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essent....

Check Stock

Dual Gigabit Ethernet Base Board Designed for Raspberry Pi Compute Module 4 Lite/EMMC Series Module, Include ETH/CSI/DSI/RTC/HDMI/Micro SD/USB Interfaces, Powerful Ethernet Capability

【Powerful Ethernet Capability】Dual Gigabit Ethernet Base Board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
【Connecting with Compute Module 4】Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
【Rich Interfaces】Providing interfaces including ETH/CSI/DSI/RTC/HDMI/Micro SD/USB.
【FAN Header】5V/12V, allows speed adjustment and measurement.
【SD Card Slot】MicroSD card socket for Compute Module 4 Lite (without eMMC) variants.

Check Stock

SNES Retro Brick Raspberry Pi 4B, 3B, 3B+, 2B Case (209 Bricks), RetroPie

Securely fits Raspberry Pi boards 2B, 3B, 3B+, and 4B (not included).
Access to power, HDMI, USB, and Ethernet ports.

Check Stock