ReviewsRatcheting Box End Wrenches Metric

GEARWRENCH 20 Piece Ratcheting Wrench Set, SAE/Metric - 35720

  • 72 tooth ratcheting box end needs a minimal 5 to move fasteners vs. 30 for standard wrenches.
  • Off-corner loading design on box end provides better grip and reduces fastener rounding.
  • Pass-thru technology works down any length of threaded rod and long bolts.
  • Thin head and beam provide greater access in confined work areas.
  • Size conveniently stamped on both ends of the beam for quick identification.
  • Manufactured from alloy steel for better strength and longer tool life.
  • Bright, full polish chrome finish wipes easily clean to resist rust and corrosion.
  • Includes SAE sizes: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 and 3/4 in, Includes metric sizes: 6, 8, 10, 12, 13, 14, 15, 16, 17, 18 millimeter.
Check Stock

GEARWRENCH 11mm 12 Point Ratcheting Combination Wrench - 9111

  • 72 tooth ratcheting box end needs a minimal 5 to move fasteners vs. 30 for standard wrenches.
  • Off-corner loading design on box end provides better grip and reduces fastener rounding.
  • Thin head and beam provide greater access in confined work areas.
  • Size conveniently stamped on both ends of the beam for quick identification.
  • Manufactured from alloy steel for better strength and longer tool life.
  • Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
  • Sleek head design enables access to tight spots where a ratchet will not fit.
  • Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.
Check Stock

Kobalt 338362 7-Piece 72-Tooth 12-Point Ratcheting Combination Wrench Set Metric includes 8 10 12 13 14 15 and 17-mm Wrenches

  • 7 PIECE SET - 7-Piece set of combination wrenches includes a selection of the most commonly used metric sizes.
  • DURABLE POLISHED STEEL - Wrenches are made from durable heat-treated chrome vanadium steel with a fully polished finish.
  • 12-POINT BOX - 12-point box end allows wrench to work on 6-point, 12-point, star, square, and even semi-rounded fasteners.
  • 90-TOOTH DESIGN - 90-tooth ratcheting mechanism only needs a 4-degree arc swing.
  • ANGLE-FREE SHAFT - Wrench shafts are flat to allow easier access to narrow work spaces where ratchets and sockets will not fit.
Check Stock

DURATECH Reversible Ratcheting Combination Wrench Set, Metric, 9-Piece, Open end Spanner with Rolling Pouch, 8mm to 19mm, 12 Point, CR-V Steel

  • [High Quality] Heat treated Chrome Vanadium Steel and polished surface ensure durability and resistance to corrosion. The professional-grade, high-polish finish lets you easily wipe away gunk and grease, preparing them for the next job at hand..
  • [Reversible Design] Flush mounted reversing lever allows you to change direction without removing the wrench. Save time and effort, improve working efficiency..
  • [Ratcheting Combination Wrenches] The 72-tooth ratchet gears need only a 5-degree working swing arc for access in tight spaces. 12 point box end with 15-degree offset for quick engagement with fastener and prevent round-off. Combination Wrenches provides more options with less to carry..
  • [Metric Sizes] 9 Pieces high quality wrenches that exceeds ANSI standard. We selected the Metric sizes you will need most often: 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm wrenches. You'll always have the right size for all quick jobs..
  • [Storage Pouch] The wrench set comes with a premium roll-up pouch for easy organization and convenient storage, and the tailored cover keeps wrenches from sliding out. They roll up neatly in an organizer bag for storage in your car trunk or mechanics gear..
Check Stock

GEARWRENCH Ratcheting Combination Wrench 16mm, 12 Point - 9116D

  • 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches.
  • Off-corner loading design on box end provides better grip and reduces fastener rounding.
  • Thin head and beam provide greater access in confined work areas.
  • Size conveniently stamped on both ends of the beam for quick identification.
  • Manufactured from alloy steel for better strength and longer tool life.
  • Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
  • Sleek head design enables access to tight spots where a ratchet will not fit.
  • Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.
Check Stock

DURATECH Flex-Head Double Box End Ratcheting Wrench Set, 7-In-1 Metric Wrench Set, 8-19mm, 72 Tooth Gear, CR-V Steel, with Tool Organizer

  • 【WHY CHOOSE OUR 7-IN-1 FLEX-HEAD WRENCH SET】8.3-Inch Flex-head double box head ratcheting wrenches: 14mm ratchet wrench (compatible with 8-12mm replacement heads), 19mm ratchet wrench (compatible with 13-17mm replacement heads), which can be switched freely..
  • 【HIGH QUALITY MATERIAL】7-in-1 flexible head ratchet wrench set is made of high quality chrome vanadium steel with a mirror finish. Heat treated for reliable torque and strength, and chrome plated to resist corrosion and rust for long lasting durability..
  • 【GREAT FLEXIBILITY & 72 TOOTH RATCHET】180° rotating head design allows you to apply levers and bypass obstacles at any desired angle. 72-tooth ratchet gear, only needs 5 degrees of working swing arc. The Metric box end ratchet wrench can be used in narrow spaces, which are versatile and flexible..
  • 【EASY TO CARRY】8.3 Inch box end ratchet wrench14mm/19mm, 5 replacement heads: 8mm, 10mm, 12mm, 13mm, 17mm. With a storage box for easy storage, easy to carry and hang, to meet your work needs..
  • 【WIDELY USED】Ideal for tightening and loosing screws or nuts. This metric ratcheting wrench set would be good for basic homes use and can be used for a variety of repair work such as car repair and maintenance, bicycle repair, mechanical repair,....
Check Stock

ABN Ratcheting Wrench - 12 and 14mm Ratchet Tool Double End Flex Head Replacement Tool for Metric Ratcheting Wrench Set

  • [Ultimate Access]: The ABN 12mm and 14mm Flex Head Extra-Long Ratcheting Wrench fits the tight spot other standard wrenches cannot reach.
  • 180-degree pivoting head allows navigation around obstructions along swing path.
  • [Remove Stubborn Fasteners]: The closed end ratchet wrench provides ample leverage to turn tough fasteners.
  • Universal spline drive for 12-point, 6-point, rounded 6-point, spline, e-torx, and square fasteners.
  • [Dual Sizes]: 1 metric ratcheting wrench with 2 sizes - 12 and 14mm.
  • The double box end wrench has ends that are permanently laser-etched with sizing.
  • [Built to Last]: Constructed from chrome-vanadium steel (CR-V) with a mirror-polished finish for maximum strength and longevity that resists rust and corrosion.
  • Measuring at 13-inch (33cm), it is the perfect size for any project.
  • [Contents]: Package includes (1) 12 and 14mm 12 point dual end flex head ratchet to suit your needs.
Check Stock

TEKTON Combination Wrench Set, 19-Piece (6-24 mm) - Rack | WCB91202

  • Includes 19-pc. metric combination wrenches: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
  • No Skipped Sizes: this 19-piece set contains a full range of wrenches from 1/4 inch to 1-1/4 inch.
  • Angled Open End: to reduce the working swing arc in tight spaces, the wrenches' open end is angled 15 degrees so the wrench can be flipped over with each rotation to engage the fastener twice as often.
  • Offset Box End: the wrenches' box end is offset 15 degrees, creating clearance for your fingers and making it easier to reach around obstructions.
  • Corrosion Resistant Finish: polished chrome finish easily wipes clean and protects wrenches from corrosion.
  • 12-Point Box End: a 12-point box end doubles the access angles of a 6-point box end.
Check Stock

GEARWRENCH 8 Pc. 12 Point Open End Ratcheting Combination SAE Wrench Set - 85599

  • Combines the speed of ratcheting with the access of the open end wrench.
  • The open end ratcheting mechanism allows you to turn nuts and bolts without taking the wrench of the fastener.
  • Ratcheting box-end needs as little as 5 degrees to move fastener vs. 30 degrees for standard box end wrenches.
Check Stock

GEARWRENCH 12 Pt. Ratcheting Combination Wrench, 19mm - 9119

  • Leading manufacturer of high-quality tools.
  • Made to withstand even the most demanding jobs.
  • International Renown for our diverse range of products.
  • All our products have been designed with the requirements of the professional in mind.
  • Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
  • Sleek head design enables access to tight spots where a ratchet will not fit.
  • Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.
Check Stock

ORION MOTOR TECH Ratcheting Wrench Tool Set, Dual Head Metric Wrench Set with Long Handles Flex Head 12pt 72 Gear Ratchets, 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm 18mm 19mm Ratchet Wrench Set

  • METRIC RATCHETING WRENCHES---This Orion Motor Tech ratchet set includes 6 double-headed wrenches to cover the most commonly needed metric sizes: 8mm, 9mm, 10mm (about 3/8"), 11mm, 12mm, 13mm (about 1/2"), 14mm, 15mm, 16mm (about 5/8"), 17mm, 18mm, 19mm (about 3/4").
  • EXTRA-LONG DESIGN---Boasting handles up to 80% longer than standard-length wrenches for greater torque and control, these 9.6"-16.3" hand tools are perfect for hard-to-reach applications.
  • CONVENIENT CONTROL---Each of the 12 box end heads provides 12 points of contact with 72-tooth gearing requiring only a 5 degree arc to ratchet your car, truck, or motorcycle's fittings in and out of position.
  • each head swings 180 degrees on secure pivots to get your tool everywhere it needs to go, even around obstructions.
  • and the nylon tool roll keeps everything well organized and easy to store or transport between jobs.
  • DURABLE CONSTRUCTION---These professional mechanic tools are made from chrome vanadium steel for superior strength, their chrome finish further improving their lasting corrosion resistance for years of service.
  • SATISFACTION GUARANTEED---Order this ratcheting wrench set with your peace of mind assured thanks to its strong 1 year warranty and Orion Motor Tech’s usual friendly 24/7 cust....
Check Stock