ReviewsRatcheting Tap Wrenches

GEARWRENCH 34 Pc. 72-Tooth 12 Point SAE/Metric Standard/Stubby Combination Ratching Wrench Set - 85034

  • Gearwrench's Ratcheting Combination Wrenches have a 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches.
  • Off-corner loading design on box end provides better grip and reduces fastener rounding.
  • Pass-thru technology works down any length of threaded rod and long bolts.
  • Thin head and beam provide greater access in confined work areas.
  • Size conveniently stamped on both ends of the beam for quick identification.
Check Stock

GEARWRENCH 11mm 12 Point Ratcheting Combination Wrench - 9111

  • 72 tooth ratcheting box end needs a minimal 5 to move fasteners vs. 30 for standard wrenches.
  • Off-corner loading design on box end provides better grip and reduces fastener rounding.
  • Thin head and beam provide greater access in confined work areas.
  • Size conveniently stamped on both ends of the beam for quick identification.
  • Manufactured from alloy steel for better strength and longer tool life.
  • Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
  • Sleek head design enables access to tight spots where a ratchet will not fit.
  • Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.
Check Stock

GEARWRENCH Ratcheting Combination Wrench 16mm, 12 Point - 9116D

  • 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches.
  • Off-corner loading design on box end provides better grip and reduces fastener rounding.
  • Thin head and beam provide greater access in confined work areas.
  • Size conveniently stamped on both ends of the beam for quick identification.
  • Manufactured from alloy steel for better strength and longer tool life.
  • Surface Drive provides a stronger grip on fasteners, reducing fastener rounding.
  • Sleek head design enables access to tight spots where a ratchet will not fit.
  • Ratcheting box-end needs as little as 5 degrees to move fastener VS 30 degrees for standard box end wrenches.
Check Stock

Refrigeration Tool Set - Service Wrench - 5/16 x 1/4 Ratchet Box End - Air Conditioning Valve Hex Tool (2)

  • 5 pc. Metric set includes : 10 x 12 millimeter, 11 x 13 millimeter, 14 x 16 millimeter, 15 x 17 millimeter, 19 x 22 millimeter S Shape reversible ratcheting wrenches.
  • S Shape provides ease in getting around obstacles with dual access reversing levers providing increase in productivity.
  • Ratcheting box end needs as little as 5 degrees to move fastener VS. 30 degrees for standard box end wrenches.
  • Surface Drive design nearly eliminates fastener rounding.
Check Stock

DURATECH Ratcheting Combination Wrench Set, Metric, 10-piece, 6-18mm , Chrome Vanadium Steel, with Carrying Bag

  • Wrenches are made from durable chrome vanadium steel, additional mirror finish improves the corrosion resistance of the surface and effectively prolong the service life. DURATECH 10-Piece ratcheting combination wrench set makes emergency repairs a breeze..
  • 72 teeth perfect precision with slim profile. The 12-Point box end delivers reliable torque to tighten or loosen any bolt without rounding. Top-quality hand tools for every repair project..
  • 10-piece unbreakable Ratcheting Combination Wrench Set that exceeds ANSI standard includes: 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm. Wrench sizes are stamped on both sides of the handle for easier size identification..
  • The wrench set comes with a premium roll-up pouch for easy organization and convenient storage, and the tailored cover keeps wrenches from sliding out..
  • This comprehensive collection of open-ended and ratchet wrenches is a must-have for your roadside emergency kit. They roll up neatly in an organizer bag for storage in your car trunk or mechanics gear..
Check Stock

K Tool International KTIXDDBM10 Metric Double Box Univ Spline 90 Tooth Rev Rat Wrench Set - 5 Piece

  • This K-Tool XD product comes with a patented 90 tooth design which is excellent for tight working space.
  • Extra long, flexible and reversible making it the most versatile set of ratcheting wrenches on the market.
  • The 180° rotating head on both ends of the wrench allows the ratchet wrench flexibility to bypass obstacles for easy use at any angle.
  • Innovative internal gear mechanism and spherical profile (Spline Plus) makes this one of the best performing ratcheting wrenches available.
  • Raised box end gear provides more surface contact and access to recessed fasteners.
Check Stock

Craftsman 11 Piece Metric Combination Wrench Set - 12 Point - Model 946932

  • Craftsman 20 piece ratcheting combination wrench set (Inch and Metric).
  • Includes these sizes: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, and 3/4 inch. Metric 6, 8, 10, 12, 13, 14, 15, 16, 17 and 18 MM.
  • Fine ratcheting action. 5 degrees of sweep to move a fastener (6 degrees for 6 MM, 8 MM, 1/4 and 5/16 inch wrenches)..
  • Fully polished finish for comfortable grip. 12 point, fine ratcheting action..
  • Slim profile for easy access to tight spaces.
Check Stock

GEARWRENCH 8 Pc. 12 Point Open End Ratcheting Combination SAE Wrench Set - 85599

  • Combines the speed of ratcheting with the access of the open end wrench.
  • The open end ratcheting mechanism allows you to turn nuts and bolts without taking the wrench of the fastener.
  • Ratcheting box-end needs as little as 5 degrees to move fastener vs. 30 degrees for standard box end wrenches.
Check Stock

GEARWRENCH 114 Pc SAE/Metric Ratcheting Tap and Die Set - 82812

  • Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Ratcheting t wrench works with GEARWRENCH pass thru socket system.
  • Die adapters work with the 3/8inch Drive pass thru ratchet and socket system as well as socket accessories.
  • Auto locking feature allow the tap adapters to be removed safely Blow mold carrying case with tilted tap holders for easy access and storage Set includes 2 ratcheting T handles, 3 sizes of tap adapters and 2 sizes of die adapter, 2 extension adapters and a sliding T for the adapters, a 4mm hex key, 5 screw extractors, SAE and metric thread gauges, and 48 taps and dies in SAE and metric sizes ranging from 4 40 to 3/4” and 3mm to 18mm.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2....
Check Stock

Ratcheting Wrench Set With ToolRoll - Multiple Sizes

  • 22 PIECES RATCHETING WRENCH SET with mirror finish includes SAE and Metric combination wrenches. Speed up the work with this master set which is larger and more versatile than other 20 piece sets..
  • BOX WRENCHES SLIM PROFILE & EXTREMELY STRONG CHROME VANADIUM STEEL. The 72-tooth ratchet gears need only a 5-degree working swing arc. Full-drive box ends deliver reliable torque to tighten or loosen any bolt without rounding..
  • 11 METRIC + 11 SAE WRENCHES includes 6mm, 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4..
  • GET BONUS TOOL ROLL WHEN YOU BUY TODAY for protection and storage of your 22 pc wrenches. The tool roll case has each wrench size printed which makes organizing easy. Add this premium quality set to your box today!.
  • LIFETIME WARRANTY insures your ToolGuards Wrenches purchase against manufacturer defects..
Check Stock