ReviewsRating Distribution

Electronics-Salon Panel Mount 10 Position Power Distribution Fuse Module Board, for AC/DC 5~32V

Panel Mount Power Distribution Fuse Module Board..
Work voltage: AC or DC 5~32V, total current rating 40Amp. Dimensions: 150mm x 72.5mm x 29mm (W x L x H)..

Suitable for use with QO loadcenters, NQOD panelboards or interiors and Speed-D switchboard distribution panels.
Measures 0.75 Inch x 2.91 Inch x 3.5 Inch.
Has interrupt current rating of 10 Kilo-Amps.

Converts 105 To 130 Volt AC To 13.2 To 14.4 Volt DC.
With Four 30 Amp AC Output Circuit And Four 25 Amp DC Output Circuit.
Protection From Short Circuit/ Reverse Polarity/ Over Current/ Over Temperature/ Over Voltage.
14.9 Inch Width x 7.3 Inch Height x 5 Inch Depth.
With Battery Charger/ Distribution Center.

Countertop griddle constructed of stainless steel material.
Its griddle surface with even heat distribution is great for eggs, pancakes, hamburgers, chicken, vegetables and more.
Features 11-inch fully removable grease tray.
Extra tall steel splashguards with tapered front end for protection against grease and spills.
It has 120 volt AC, 15 ampere, 1800 watts power rating.

Fluke current clamps are the ideal tools to extend the current ranges of Fluke tools.
Clamp-on AC current clamp for use with oscilloscopes and multimeters with banana input using the supplied dual banana to BNC adapter.
The clamp is optimized for measurement on power distribution systems.

Countertop griddle constructed of stainless steel material.
Its griddle surface with even heat distribution is great for eggs, pancakes, hamburgers, chicken, vegetables and more.
Features 11-inch fully removable grease tray.
Extra tall steel splashguards with tapered front end for protection against grease and spills.
It has 120 volt AC, 15 ampere, 1800 watts power rating.

Deep-groove geometry for high speeds and supporting both radial and axial loads.
Shields on both sides of the bearing to keep lubricant in and contaminants out.
Normal radial internal clearance for applications that do not involve thermal expansion or atypical precision.
Pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise.

Compatible with any Fluke ScopeMeter test tool, power harmonics analyzer, oscilloscope, multimeter.
Compitable with other voltage measurement device with BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter.
Designed to provide you with safe, high accuracy measurements for a wide range of applications.
Specially designed built-in safety features such as the 600 V RMS rating at the input jaws, output cable and BNC connector enhance work safety in industrial and commercial power distribution systems.
The probe is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices like adjustable speed motor drives and ignition systems.

Pre-Installed Components: The pre-installed 2-5/16" hitch ball and sway control ball are torqued to specification on the adjustable ball mount hitch head.
U-bolts and chain package are pre-installed on the spring bars of the load-leveling hitch.
Maximum Weight Capacity: The weight distribution hitches with sway control have a maximum tongue weight capacity of 1,200 lbs and a maximum gross weight rating of 12,000 lbs.
Kit Includes: A weight distributing hitch, Eaz-Lift sway control hitch with mounting hardware, 2-5/16" ball, adjustable ball mount, installation instructions, and a 48120 Bolt Together 2" x 2" Hi-Low Shank of 12" length, 2.5" drop, and 5.5" rise.
Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Includes 1,200 pound weight distributing hitch, sway control and 2-5/16" hitch ball.
Hitch ball and sway control ball are pre-installed and torqued to specification on adjustable ball mount.
U-bolts and chain package are pre-installed on spring bars.
1,200 pound maximum tongue weight capacity.
Maximum gross weight rating of 12,000 lbs.

Features – The 2 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Bass Boost, Remote Bass Knob, Gain Control, 2-way....
Class A/B – This Orion Cobalt multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier....
Quality - This Class A/B 2 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent....
Power – This Class A/B 1500 Watt Amplifier has a power rating distribution as followed 2250 X 2 MAX @ 2 OHMS, 1125 X 2 MAX @ 4 OHMS. The dual....
Low/High Level Inputs – The multichannel subwoofer amplifier for car stereo speakers come with low/high level inputs. A low level (RCA) input is....

Newly enhanced with Bluetooth Technology for convenient iOS and Android smart phone remote control, via a free downloadable Ozeri app..
Powered ultra-quiet dual oscillating motors with automatic vertical (up/down) and horizontal (left/right) motion, for the widest possible distribution of refreshing airflow..
Engineered to deliver maximum airflow at the lowest possible dB noise rating, with 4 different speed settings..
Features a non-oscillating mode for precisely directed airflow and immediate cooling effectiveness..
Boasts a sophisticated and stylish space-saving design, a 4 hour timer, and an included extended-range remote..