ReviewsRazor Barb Wire

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ...s) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ...s) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ...) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • ...12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

Nicky Bigs Novelties 24 Foot Fake Barbed Wire - Halloween Plastic Barb Wire Decoration Prop, Rusted Brown

  • Approximately 144" of realistic looking plastic rusted barbed wire.
  • Color Will Vary But Be Substantially Similar.
  • Fake Plastic 24' Long Rusty Barb Wire Garland Halloween Prop Decoration.
Check Stock

Battlefield Earth [Blu-ray]

  • BRING YOUR MINIS TO THE NEXT LEVEL: Razorwire gives the effect of a war-torn setting - and is essential for any sci-fi or modern wargaming base. This steel wire, imitating razorwire gives the realistic effect of a war-torn setting. Ideal for 15mm & 28mm miniatures, military dioramas, railway sceneries & terrain model kit..
  • ADD REALISM TO YOUR MODELS: With 150ml of metal razor wire, adding realistic rocks to your bases is a breeze. Use a thick old brush to apply glue to the area that will later be covered with basing material..
  • EASY-TO-STORE: Comes in a 150 ml plastic box which makes it easy to apply the basing supply without having them scattered all over your work area, and for easy storage to keep away from children..
  • MINIATURE SCENERY AT ITS BEST -This steel wire, imitating razor wire gives the effect of a war-torn setting.
  • EASY-TO-USE-Use large brush to roll the wire. Add super glue onto the base of model & stick the wire.
Check Stock

Hardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee

  • 【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ，Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
  • 【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
  • 【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
  • 【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
  • 【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..
Check Stock

Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP

  • ...gs) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT FRESH WATER PUMP | on demand diaphragm pump | MODEL # 12V3 - READ INCLUDED INSTRUCTIONS BEFORE INSTALLATION / USE.
Check Stock

Marvel Studios' Avengers: Endgame (Bonus Content)

  • BRING YOUR MINIS TO THE NEXT LEVEL: Razorwire gives the effect of a war-torn setting - and is essential for any sci-fi or modern wargaming base. This steel wire, imitating razorwire gives the realistic effect of a war-torn setting. Ideal for 15mm & 28mm miniatures, military dioramas, railway sceneries & terrain model kit..
  • ADD REALISM TO YOUR MODELS: With 150ml of metal razor wire, adding realistic rocks to your bases is a breeze. Use a thick old brush to apply glue to the area that will later be covered with basing material..
  • EASY-TO-STORE: Comes in a 150 ml plastic box which makes it easy to apply the basing supply without having them scattered all over your work area, and for easy storage to keep away from children..
  • MINIATURE SCENERY AT ITS BEST -This steel wire, imitating razor wire gives the effect of a war-torn setting.
  • EASY-TO-USE-Use large brush to roll the wire. Add super glue onto the base of model & stick the wire.
Check Stock

Bloomer Girls: Women Baseball Pioneers (Sport and Society)

  • BRING YOUR MINIS TO THE NEXT LEVEL: Razorwire gives the effect of a war-torn setting - and is essential for any sci-fi or modern wargaming base. This steel wire, imitating razorwire gives the realistic effect of a war-torn setting. Ideal for 15mm & 28mm miniatures, military dioramas, railway sceneries & terrain model kit..
  • ADD REALISM TO YOUR MODELS: With 150ml of metal razor wire, adding realistic rocks to your bases is a breeze. Use a thick old brush to apply glue to the area that will later be covered with basing material..
  • EASY-TO-STORE: Comes in a 150 ml plastic box which makes it easy to apply the basing supply without having them scattered all over your work area, and for easy storage to keep away from children..
  • MINIATURE SCENERY AT ITS BEST -This steel wire, imitating razor wire gives the effect of a war-torn setting.
  • EASY-TO-USE-Use large brush to roll the wire. Add super glue onto the base of model & stick the wire.
Check Stock

Battlefield Ukraine: Book One of the Red Storm Series

  • BRING YOUR MINIS TO THE NEXT LEVEL: Razorwire gives the effect of a war-torn setting - and is essential for any sci-fi or modern wargaming base. This steel wire, imitating razorwire gives the realistic effect of a war-torn setting. Ideal for 15mm & 28mm miniatures, military dioramas, railway sceneries & terrain model kit..
  • ADD REALISM TO YOUR MODELS: With 150ml of metal razor wire, adding realistic rocks to your bases is a breeze. Use a thick old brush to apply glue to the area that will later be covered with basing material..
  • EASY-TO-STORE: Comes in a 150 ml plastic box which makes it easy to apply the basing supply without having them scattered all over your work area, and for easy storage to keep away from children..
  • MINIATURE SCENERY AT ITS BEST -This steel wire, imitating razor wire gives the effect of a war-torn setting.
  • EASY-TO-USE-Use large brush to roll the wire. Add super glue onto the base of model & stick the wire.
Check Stock