ReviewsRc Rock Crawlers

Losbenco RC Truck 1:16 Scale 4WD RC Crawler, 4X4 Off-Road Racing Vehicles 2.4GHz 4CH All Terrain Remote Control Car with LED Lights

  • ...otection, combined with a 6V 700mAh in-car battery pack with charge protection, you can enjoy the fun of driving for about 25+ Mins at a time with this RC rock crawler. And you can charge the battery with a USB cable included in the package..
  • [Maximum Speed of 20km/h]—RC Crawlers is powered by a 2-wheel drive motor system that can push the buggy car to a maximum speed of 20km/h. With four options-forward, backward, left and right-it is easy to operate. Both children and adults can master operations easily..
  • [2.4Ghz Transmitter]—Designed with a 1:16 Scale, Remote Control Truck is like a real racing off-road car. With 2.4GHz transmitter strength, its strong transmitter power means no signal interference if multiple players race at the same time..
  • [Conquer All Terrains]—The remote control car has a working spring suspension system, 4 wheel drive, and adapts to a variety of terrain easily: such as grassland, mountains, beaches, and other complex terrains, indoors and outdoors. Perfect for RC car racing! Good gift for any child or beginner..
  • [100% Satisfied Customer Service]—The....
Check Stock

Flysky FS-GT3B RC Transmitter Receiver 2.4Ghz 3 Channel, Rc Car Remote Controller with Flysky GR3E Failsafe Receiver - HOBBYMATE

  • Flysky Fly Sky gt3b radio transmitter Remote Controller with gr3e receiver for rc car, rc truck, rc crawlers, and rc boat..
  • Working frequency between 2.40GHz-2.4835GHz has been divided into 160 frequency points, each system uses 16 points and 160 hopping frequency to avoid frequency jamming.
  • FlySky rc GT3B Radio Transmitter will work with most if not all servos on Rc Car, Rc Truck, Rc Boat.
  • Unique ID for each transmitter: the receiver will automatically check ID after successful pairing, and this dramatically increases the ability of anti-jamming..
  • Model Memory Servos Normal / Reverse Steering Trim / Throttle Trim / Dual Rate / End Point / ABS Settings / EXPO Settings.
Check Stock

RC Luggage Net, RCPLAGA 1/10 RC Elastic Luggage Net with Hook for 1/10 Scale RC Vehicle Crawlers D90 SCX10 90046 TRX4 Roof Rack (Orange)

  • WIDE COMPATIBILITY: 1/10 RC Elastic Luggage Net is suitable for most 1:10 scale RC vehicle crawlers D90 SCX10 90046 TRX4 roof rack..
  • PREMIUM MATERIAL: 1/10 RC Elastic Luggage Net is made of quality rubber rope, wear resistance, sturdy and durable..
  • EASY TO MOUNT: RC roof rack net with 16 S-hooks, easy to install on the roof rack..
  • ELASTIC NET WITH HOOK: Our RC car roof net with elastic, can be stretched, those hooks help to fix things on the roof rack of RC car..
  • WELL MADE DETAILS: Our RC roof rack net with good workmanship, with rubber rings to fix crossing point to ensure net not deformed..
Check Stock

INJORA RC Transmitter 2.4GHz 6CH Controler and Receiver with Gyro Remote Inside Receiver for 1/8 1/10 RC Car Boat Tanks Crawler TRX4 SCX10 Upgrade Parts

  • Flysky Fly Sky gt3b radio transmitter Remote Controller with gr3e receiver for rc car, rc truck, rc crawlers, and rc boat..
  • Working frequency between 2.40GHz-2.4835GHz has been divided into 160 frequency points, each system uses 16 points and 160 hopping frequency to avoid frequency jamming.
  • FlySky rc GT3B Radio Transmitter will work with most if not all servos on Rc Car, Rc Truck, Rc Boat.
  • Unique ID for each transmitter: the receiver will automatically check ID after successful pairing, and this dramatically increases the ability of anti-jamming..
  • Model Memory Servos Normal / Reverse Steering Trim / Throttle Trim / Dual Rate / End Point / ABS Settings / EXPO Settings.
Check Stock

Robinson Racing Products Extra Hard Steel 5mm Bore 1 Module Pinion 18T RRP1218

  • 1. Material: High Quality Metal. Various Size Screws idea for RC Models..
  • 2. Compatibility: Fit for 1/8 1/10 RC Model Cars Crawler Truck...
  • 3. Easy Organization and Portable: Classify and Store in different grids in a plastic case for easy usage..
  • 4. A must have for RC Model Cars Vehicles Trucks Buggy, On-Road Off Road, Short Course and Crawlers..
  • 5. Package List: M3 and M4 Screws (Flat and Round Head), M3 Bolt Washers, Lock Nut, Shell Clip, E-Clip, Pins and O-Circle. 500Pcs totally..
Check Stock

Apex RC Products 5 LED 89mm Aluminum Light Bar Compatible with The LaTrax SST, Traxxas 1/16 Slash, Stampede/4x4/Nitro, Nitro Sport, E-Revo, ECX 1/18 Torment & More #9042

  • Compatible With The LaTrax SST, Traxxas 1/16 Slash, Stampede/4x4/Nitro, Nitro Sport, E-Revo, Redcat Volcano EPX/S30, Caldera 10E/3.0, ECX 1/18 Torment & Axial Twin Hammers. Will Work On Many 1/16-1/18 Short Course Trucks & 1/10 Scale Rock Crawlers, Trucks, Stadium Trucks, Buggys.
  • 89mm Long - Mounting at 77mm or 92mm with the mounting feet facing in or out (see last picture) Please measure where you plan on mounting it to make sure it will fit.
  • 5 SUPER BRIGHT LED LIGHTS - Great for running at night, or in poorly lit areas. Can be mounted on the roof for a truck scale appearance, or on the hood to be better protected during rollovers. Includes 4 screws and bolts to securely mount the light bar to the body.
  • With the use of our #9025 (ASIN B07BKSGW3D) electronic switch the light bar can be turned on & off remote via the remote (spare channel required).
  • 4.8V-6.0V Input - Can be powered through any spare channel in receiver, if a channel isn't available a Y-Harness (Apex RC Products #1031) can we used. If installed in a vehicle with a sealed receiver box we recommend using a 3" or 6" (Apex RC Products #1002 or #1006) to make taking the body on and off easier..
Check Stock

ShareGoo RC 12 LED Light Bar Roof Lamp Spotlight Dome Light Compatible with Traxxas TRX-4 SCX10 KM2 CC01 RC4WD D90 90046 90047 RC Crawlers,50mm/1.97'

  • Please USE the rc receiver or 6V battery pack as the power supply,OR, use the power supply under 7V..
  • The rc roof light bar designed to make your RC crawler more cool and attractive. Compatible with Traxxas TRX-4 SCX10 KM2 CC01 RC4WD D90 90046 90047 RC crawlers car..
  • This Mini light bar can be mounted on the pipe frame ,the rc car roof or front bumper..
  • The Working Voltage: 4.8-7V,can be powered by the receiver or esc..
Check Stock

RC Car Winch Control System, 1/10 Scale RC Model Vehicle Crawler Car Accessory Metal Winch Electic Control

  • Winds Up or Out of Cable : It winds up or out of the wire cable, allowing you to tow objects or another RC car stucked in the mud.
  • Convenient to Assemble : Installed directly in the appropriate space, some models may need to punch holes themselves, and then the circuit can be used. This is an additional feature accessory that does not affect the normal functioning of the car.
  • Designed for : Suitable for SCX10 / D90 / HPI 1/8 RC crawler car.
  • Excellent Workmanship : With exquisite appearance, good performance and fine workmanship. Designed for use on 1/10 scale RC crawlers.
Check Stock

35A Electronic Speed Controller 3~6S Brushless ESC AM_32bit RC Controller Compatible for RC Crawler Truck & RC Car Model

  • The continuous current of 35A ESC is 35A, and the instantaneous peak can be up to 40A(≤10S). The working voltage is DC10V to 25.2V.
  • Electronic speed controller is supported DShot150/ 300/ 600/ 1200/ Oneshot/ Multishot and PWM, specializing used in RC car models, such as RC crawlers, trucks, cars. Please note, this ESC only can use for RC car models.
  • The input voltage is suitable for a 3~6s lipo battery. It is optimized for RC outrunner motors, suitable for EVO series motors and other outrunner motors, which can have well-used in RC car models.
  • The throttle signal cable is twisted pair, which is more effective, long life, and reduces interference, making the flight more stable.
  • The size of 35A ESC controller is 1.26 x 0.63 x 0.24in (32 x 16 x 6mm) and the weight is 8.1g(Including wires). The package included one electronic speed controller.
Check Stock

MeiBoAll 1/10 RC Vehicle Elastic Luggage Net, RC Car Roof Net Luggage Netting, RC Crawler Accessory Cargo Cover Net, Roof Rack Net with Hooks for RC4WD Axial D90 SCX10, Black

  • WIDE COMPATIBILITY: Our RC luggage net fit for most 1:10 scale RC vehicle crawlers D90 SCX10 TRX4 roof rack.
  • ELASTIC NET WITH HOOK: Our RC car roof net with elastic, can be stretched, those hooks help to fix things on the roof rack of RC car..
  • EASY TO MOUNT: Our RC roof rack net with 16 S-hooks, easy to install on the roof rack.
  • PREMIUM MATERIAL: Our RC roof rack net is made of quality rubber rope, wear resistance, sturdy and durable..
  • WELL MADE DETAILS: Our remote control vehicle roof luggage cover net with good workmanship, with rubber rings to fix crossing point to ensure net not deformed..
Check Stock

GLOBACT 21T 550 Brushed Motor and 80A ESC Brushed Motor ESC Combo BEC 5A 7.4V/6.4V for 1/10 RC Crawler Car Traxxas Trx4 Ford Bronco Trx6 Axial SCX10 II III Redcat Gen7 Gen8 V2 RC4WD D90 (T Plug)

  • ...of and dust-proof desi?n allows the Globact 21T 550 motor 80A esc Brushed to be used in all weather conditions without any issue of damage causedto the ESC from water or dust..
  • 【Dual Running Mode】ESC supports BEC high voltage & low voltage switching (5A 7.4V/6.4V), Crawlers & High Speed Dual Mode switching, Input voltage:7.4V (2S Lipo) / 6V-8.4V (5-7 cells NiMH). Note: It is recommended to use crawlers mode for crawlers vehicles and high-speed mode for trucks.(Note: Not compatible with 3S Lipo battery).
  • 【High quality】This Set is an enhanced package. The conventional 21T 550 motor set ESCs on the market are all 60A. We use 80A ESC, which can better solve the fire problem caused by the overcurrent and overload of the ESC, so that you can use it without worry..
Check Stock