ReviewsRca Inputs To Outputs

BOSS Audio Systems AR1500M Car Amplifier - 1500 Watts Max Power, 2 4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control

  • POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db..
Check Stock

Nobsound Little Bear T7 Vacumn Tube Mini Phono Stage RIAA MM Turntable Preamp & HiFi Tube Pre-Amplifier (Silver)

  • CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
  • LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
  • CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
  • SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.
Check Stock

Acoustic Audio AA5170 Home Theater 5.1 Bluetooth Speaker System with FM and 5 Extension Cables, Black

  • Bluetooth 5. 1 Home theater speaker system - stream music from your phone to the built in Bluetooth receiver, integrated power amp with 700 watts system power, Pro surround function automatically converts stereo to 5. 1 Sound, FM tuner.
  • Easy plug and play connections - standard RCA inputs connect to most Audio sources, 6 independent RCA inputs for True surround, stereo RCA aux inputs, illuminated display with front panel controls, USB drive input and SD card input, full function remote.
  • Highest Quality - powered Sub speaker is 12. 3" X 6. 7" X 13. 1", 20hz-20 kHz, 5 wired satellite speakers are 6. 7" X 4. 1" X 4" Each, 2 fronts and center speakers have 6 foot RCA cables, 2 rear speakers have 12 foot RCA cables, 4 RCA 25 foot Extension cables.
  • System requirements - standard US 110V grounded wall plug, any Audio device with a standard 3. 5mm headphone or RCA stereo or RCA 6 Channel surround audio outputs. Use for TV or home entertainment, laptop or PC, DVD or MP3 player, gaming.
  • What's in the box - Acoustic Audio by Goldwood AA5170 powered subwoofer speaker, 5 passive wired satellite speakers, full function remote, 3. 5mm to RCA cable, RCA to RCA jack cable, RCA antenna Cable, instruction manual, 5 RCA 25 foot Extension cables.
Check Stock

Planet Audio AC2500.1M Monoblock Car Amplifier - 2500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control

  • POWER: Maximum Power Output of 2500 Watts at 2 Ohms into one channel. Maximum Power output of 1250 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to.
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the AC2500.1M to your factory radio or aftermarket radio that does not have low-level (RCA) inputs..
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AC2500.1M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will primarily keep high notes out of your subwoofer(s).
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

BBE 282IR Desktop Sonic Maximizer w/RCA Inputs/Outputs Bundle with Mackie CR BUDS Studio Quality Earphones EarBuds Headphones w/Mic with Controls

  • Package Includes: (1) BBE 282IR Desktop Sonic Maximizer w/RCA Inputs/Outputs. (1) Mackie CR BUDS Studio Quality Earphones Earbuds In-Ear Headphones w/Mic+Controls. BBE 282IR Desktop Sonic Maximizer w/RCA Inputs/Outputs. Frequency response: +/-0.5dBu, -10dBu input.
  • Total harmonic distortion (THD): less than 0.1% at -10dBu input, 20-20kHz. Maximum output: +20dBu (may vary due to control settings). Input impedance: 47k Ohms for unbalanced RCA jack, 3.5mm mini. Output impedance: 1k Ohms for unbalanced RCA jack or 3.5mm mini.
  • Sensitivity: -45dBu for maximum process. Power Requirement: included 12 VAC power supply. Dimensions: 10.63(W) x 8.27(D) x 2.36(H). Shipping Weight: 2.65 lbs. Applications: Broadcasting. DJ Sound Reinforcement. Mastering. Musical Instruments. Desktop Playback. Recording.
Check Stock

iFi Audio Zen Phono Preamp for Turntables / Record Players

  • INPUTS – Selectable MM and MC cartridge input.
  • OUTPUTS – RCA and Balanced 4.4mm Pentacon Outputs.
  • CUSTOMIZE TO YOUR TURNTABLE SETUP – Ultrawide 36dB to 72dB gain.
  • ACCESSORIES – Includes 5V DC power supply and RCA cable.
Check Stock

Phono Turntable Preamp, Phono Preamp for Turntable, Record Play, Mini Electronic Audio Stereo Phonograph Preamplifier with RCA Input, RCA/TRS Output, Phono Preamp with 12 Volt DC Adapter

  • Convert Phono Signal:The Turntable Preamp Converts phono signals to line level for better sounding audio and volume.This state-of-the-art phono preamp can accommodate all magnetic pickups.
  • Low Noise Operation: The Turntable Preamp offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers.Make your vinyl records deliver sound exactly as it’s read from your turntable’s needle.
  • RCA Input & RCA /TRS Output: This Mini Preamp has stereo RCA inputs , stereo RCA and TRS outputs. Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA/ TRS outputs(DC 12V Adapter is included).
  • Simple Plug & Play:Connect any Phono Turntable Preamps to modern sound equipment without specialized phono input for amplifying music.Simply hook up the preamp to both turntable and audio device so you can enjoy vinyl in no time.
  • 1 Year Warrranty: DIGITNOW guarantee this Electric Phono Preamplifier with both a 30-day, no hassle money back return policy and a 1 year manufacturer’s guarantee.
Check Stock

Acoustic Audio by Goldwood Acoustic Audio AA5170 Home Theater 5.1 Bluetooth Speaker System with FM and 4 Extension Cables, Black

  • ...peakers are 6. 7" X 4. 1" X 4" Each, 2 fronts and center speakers have 6 foot RCA cables, 2 rear speakers have 12 foot RCA cables, 4 RCA 25 foot Extension cables.
  • System requirements - standard US 110V grounded wall plug, any Audio device with a standard 3. 5mm headphone or RCA stereo or RCA 6 Channel surround audio outputs. Use for TV or home entertainment, laptop or PC, DVD or MP3 player, gaming.
  • What's in the box - Acoustic Audio by Goldwood AA5170 powered subwoofer speaker, 5 passive wired satellite speakers, full function remote, 3. 5mm to RCA cable, RCA to RCA jack cable, RCA antenna Cable, instruction manual, 4 RCA 25 foot Extension cables.
Check Stock

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

  • ...It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
  • Warranty - Sound Storm provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality.
Check Stock

rolls Mixer-Powered, Black (MX44PRO)

Check Stock

Sound Storm Laboratories LOPRO10 10 Inch Powered Under Seat Car Audio Subwoofer - 1200 Watts Max Built-in Amplifier Low Profile Remote Subwoofer Control for Truck Boxes and Enclosures

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock