ReviewsReaming Bits

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..

Check Stock

T Handle Tapered Reamer Tool 3-13mm(1/8-1/2 ), 6 Fluted Chamfer Bridge Pin Hole Handheld Chaser, 45# Steel 1/4\ Hex Shank Durable for Chamfering Taper Holes Countersink Latches Guitar

CHAMFER REAMING TAPER REAMER: 3-13mm (1/8-1/2) six-blade taper reamer, taper hole, chamfer deburring and other functions, convenient for screw sinking, convenient and quick..
PURPOSE 1: Removal of burrs: remove from wood, cut pipes, pipes and ducts. Internal deburring edge tool, the capacity is 1/8" to 1/2"..
PURPOSE 2: Enlarged bridge pin hole, headstock, hole for tuner and volume/tone knob.
LABOR-SAVING AND CONVENIENT: T-shaped handles can provide leverage, making reaming easier, stronger control, and easier turning.
effortlessly processing in sheet metal, plastic and other materials..
SIZE: 45#steel, 1/4” Handle 85mm Length + 128mm Length Reamer 3-13mm Reaming diameter range..

Check Stock

RIDGID 29993 227S Stainless Steel Pipe Reamer Tool, 1/2-inch to 2-inch Inner/Outer Reamer

Ideal for reaming on stainless steel and copper tubing.
45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.
Hardened steel construction for maximum durability.
dual inch and metric measurement bar for ease of use.
Pipe reamer has a 1/2-inch to 2-inch (12 mm to 50 mm) outside diameter capacity.
RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Check Stock

QWORK 1/8\ - 1/2\ Tapered Straight Flute Handle Reamer T Handle Tapered Reamer Tool for Wood Plastic

High Quality - Made of premium 45# Steel, it is durable, stable and high strength. And the cutting edges is sharp for expanding the hole..
Function - It is an ideal way for reaming the hole in metal sheets and plastic without effort, which is not easy to drill..
Design - With removable T-handle, it can save you the power to reaming and control..
Specification - This reamer can expand hole of size from 1/8" to 1/2"..
100% Satisfied Service - Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!.

Check Stock

Culinary Fresh Citrus Jar Juicer, Manual Hand Juicer, Lemon Lime Orange Grapefruit Press: 1 Pack

CONTENTS: One (1) Citrus Jar Juicer with a citrus reaming lid and a juice container..
MAIN USE: Squeeze fresh juice from your favorite fruit by simply reaming fruit on top. The included screen filters out pulp and seeds, leaving fresh juice in a container that's ready to drink..
PERFECT FOR: Juicing oranges, lemons and limes, but also can be used as a short term storage container!.
CARE INSTRUCTIONS: After using, easily clean this reusable juicer in the dishwasher or wash by hand..
SPECIFICATIONS: Our Citrus Juicer measures 5.51" tall by 5.71" long and is made of 100% Polypropylene..

Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..

Check Stock

Southwire SDCFR Conduit Fitting Reaming Screwdriver Heavy Duty Dual Function Multi Use Detachable Head Compatible with Drill Cushion Grip Handles for Comfort

Conduit fitting reaming screwdriver that perfectly reams and smooths 1/2", 3/4", and 1" Thin-wall Conduit ends to protect wire and permit correct....
Dual function: Conduit reamer reams inside and outside of conduit simultaneously.
Comfortable grip: Comfortable cushioned grip allows a firm grip and greater torque.
Multi USE head: reaming head can be removed and used with your power drill.
Head compatible with drill: detachable head can also be used in a drill...........

Check Stock

Carving Bits Wood Engraving Router Bit with 1/8\(3mm) Shank, 20Pcs HSS Different Burr Set to Meet Your Different Needs, Durable Rotary Tools Accessories for DIY Woodworking, Carving

【More Choices, More Uses】A great carving bits set to meet your different needs. 20 Different shape engraving bit of the most commonly used types. To fit different woodworking situations, each Burr is shaped to fit different angles or situations, suitable for engraving, beveling, chamfering, grooving, reaming, hollow..
【High Compatibility】With 1/8 inch(3mm) shank, Length: 1.53inch(39mm). Make these HSS carbide rotary files can work with most rotary tools or die grinders (such as, for Dremel Wen, for Apollo). A valuable addition to any woodworker's rotary tool..
【High Quality】Made of high-speed steel (HSS) and coated with titanium for long life and exceptionally precise cuts, durable, good wear resistance, and heat resistance. Save your time and money..
【Widely Usage】A valuable supplement to woodworking rotating tools. Very suitable for detailed work, such as building and sanding dollhouse furniture, model trains, or miniature buildings and planes. Able to engrave on a wide range of materials including wood, ABS, acrylic, PVC, plastics, etc..
【What You Get】20 Different Shape Rotary Bit Burrs Set and comes with a mini clear storage case, and our worry-free 3-month warranty, and friendly customer service, If YOU have any problems, please ....

Check Stock

Accusize Industrial Tools Over and Under Sizes 0.1240'' Thru 0.5010'' HSS M2 Premium Chucking Reamer Set, Right Hand Cut, 14pcs/Set, 5528-SX00

Over & Under Sizes — 0.1240" thru 0.5010".
Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers.
They are regularly pointed with a 45°chamfer. The straight-flute design is recommended for most general-purpose reaming.
Thru 1/2" diameter +.0002" -.0000". Above 1/2" to 5/8" +.0003" -.0000". Above 5/8" to 1-1/2" +.0001" -.0004.

Check Stock

Shift Rite Transmissions replacement for 68RFE 07-2010 4X4 Transmission remanufactured 6.7L Shift Rite 68RFE

Remanufactured 68RFE 4X4 6.7L Transmission.
Torque converter is included! Updates to the TC limit valve, Updated UD/OD snap ring, TransGo Shift correction kit and much more!.
1 Year 36,000 Mile Warranty. We offer an extended Warranty 2 Year 50,000 Mile Warranty, or a 3 Year 100,000 Mile Warranty for an additional charge..
MASTER KIT (CLUTCHES, STEELS, BONDED PISTONS, OVERHAUL KIT) OEM MOPAR Solenoid Pack & MLPS Cam Plate OEM MOPAR Line Pressure Sensor Pump Gears Updated Welded Rear Planetary Pins (corrects pin walk) Updated Separator Plate Gaskets Sonnax Solenoid Switch Valve and Plug Kit (Reaming Required) Sonnax TC Limit Valve / Sleeve (Reaming Required) Updated Valve Body Resurfacing.
CORE CHARGE is $2,500! CALL AHEAD!! THANKS! Phone/Fax: (815) 9 3 5-2 3 5 6.

Check Stock

Accusize Industrial Tools 29 Pc Set 1/16 to 1/2 inch by 1/64 in HSS M2 Premium Chucking Reamers Straight Flute Aluminum Case 5528-SF00

29 PC Set: 1/16'' through 1/2'' By 64ths, Fractional size.
Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers.
They are regularly pointed with a 45°chamfer. The straight-flute design is recommended for most general-purpose reaming.
Thru 1/2" diameter +.0002" -.0000". Above 1/2" to 5/8" +.0003" -.0000". Above 5/8" to 1-1/2" +.0001" -.0004.

Check Stock