ReviewsReceptacle Tension Tester

Klein Tools 69149 Electrical Test Kit with Multimeter, Non-Contact Voltage Tester and Receptacle Outlet Tester

The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation.
The NCVT-1 has a bright green LED to indicate the tester is working.
it changes to red and warning tones sound when voltage is detected.
NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life.
Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults.
Identifies open ground, open hot, open neutral, hot/ground reversed.
it does not indicate quality of ground, multiple hot wires, or a combination of defects.

Check Stock

Klein Tools NCVT2PKIT Non-Contact Voltage Tester with Outlet Tester 12-48V AC or 48 - 1000V AC Dual Range for Broad Application

Kit contains a non-contact voltage tester and receptacle tester.
Dual range NCVT-2P automatically detects and indicates low voltage range and standard voltage (48-1000V AC).
NCVT-2P provides non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires.
NCVT-2P is a lightweight, compact tool with pocket clip for convenient storage and quick access.
CAT IV 1000 Volt rating provides expanded operation and protection.

Check Stock

Digital Force Gauge SF-500 Push Pull Tester Dynamometer Portable Tension Pressure Thrust Meter Data Storage Pressure High Precision Push Tester LCD Display 500N/50kgf/110lbf

Kit contains+B2:H150 a non-contact voltage tester and receptacle tester.
Dual range NCVT-2P automatically detects and indicates low voltage range and standard voltage (48-1000V AC).
NCVT-2P provides non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires.
NCVT-2P is a lightweight, compact tool with pocket clip for convenient storage and quick access.
CAT IV 1000 Volt rating provides expanded operation and protection.

Check Stock

Klein Tools 80016 Circuit Breaker Finder Tool Kit with Accessories, 2-Piece Set & RT250 GFCI Receptacle Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets

Product 1: Circuit Breaker Tool Kit can help quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected.
Product 1: Digital Circuit Breaker Finder with GFCI Outlet Tester (Cat. No. ET310) receiver delivers clear visual and audible indications when the correct breaker has been located.
Product 1: Operates on 90-120V AC circuits.
Product 1: Transmitter incorporates a GFCI outlet tester to inspect the wiring condition at the electrical outlet and test GFCI devices.
Product 2: LARGE CLEAR LCD READOUT on receptacle tester to instantly view results without the need to look at a chart to understand results.
Product 2: TEST GFCI TRIP TIME IN SECONDS to find out if the trip breaker is functioning.
Product 2: DETECT WIRING FAULTS of open ground, open neutral, open hot, dual open (neutral and ground), reversed hot/ground, and reversed hot/neutral.
Product 2: AUTO-HOLD FUNCTION is convenient for hard-to-reach outlets.

Check Stock

Klein Tools NCVT-4IR Non-Contact Volt Tester, 12 - 1000V AC Pen with IR Thermometer & RT250 GFCI Receptacle Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets

Product 1: Voltage Tester designed specifically for HVAC applications.
Product 1: Non-Contact Voltage Tester provides non-contact determination of AC voltage in cables, cords, circuit breakers, switches, outlets and wires, and AC voltage in security, entertainment, communications, environmental control, and irrigation systems.
Product 1: Detects AC voltage from 12 to 1000V with visual and audible indicators.
Product 1: 4:1 distance-to-spot ratio IR thermometer with user selectable Degrees Fahrenheit or Degrees Celsius from -22 to 482-Degree Fahrenheit (-30 to 250-Degree Celsius).
Product 2: LARGE CLEAR LCD READOUT on receptacle tester to instantly view results without the need to look at a chart to understand results.
Product 2: TEST GFCI TRIP TIME IN SECONDS to find out if the trip breaker is functioning.
Product 2: DETECT WIRING FAULTS of open ground, open neutral, open hot, dual open (neutral and ground), reversed hot/ground, and reversed hot/neutral.
Product 2: AUTO-HOLD FUNCTION is convenient for hard-to-reach outlets.

Check Stock

ANKO GFCI Outlet 20 Amp, UL Listed, LED Indicator, Tamper-Resistant, Weather Resistant Receptacle Indoor or Outdoor Use with Decor Wall Plates and Screws

GFCI Outlet - Constructed with premium high-impact resistant thermoplastic materials and rational structure design, ensures superior strength and durability. it a single gang GFCI electrical box that supports a standard duplex, grounded receptacle.
Safe electrical GFCI outlet tester with TEST and RESET buttons and LED Indicator is designed to meet local and national electrical codes..
Safty - The ANKO GFCI USB Outlet meets UL-Listed YGB-094WR, 20 Amp, 125 Volt, 60HZ. Tamper Resistant Receptacle prevents young children from inserting unwanted objects into the outlets. For an added layer of protection, the GFCI regularly conducts an automatic internal test to confirm that it can respond to a ground fault, provides continuous ground fault protection..
Weather Resistant - Constructed with advanced UV stabilized engineering to provide superior corrosion, temperature, and UV resistance, preventing discoloration and aging, ideal for outdoor & indoor use. Ground fault circuit interrupter GFCI outlets are required in kitchens and bathrooms and within 25 feet of heating, air conditioning and refrigeration equipment to prevent electrical shock in areas subject to moisture..

Check Stock

Klein Tools ET310 AC Circuit Breaker Finder with Integrated GFCI Outlet Tester & RT250 GFCI Receptacle Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets

Product 1: This circuit breaker finder can quickly and accurately locate the correct circuit breaker in a panel corresponding to the circuit to which an electrical outlet or fixture is connected.
Product 1: GFCI tester consists of two parts: a Transmitter connected to the electrical outlet or fixture, and a Receiver used to scan the panel to locate the correct breaker.
Product 1: Receiver delivers clear visual and audible indications when the correct breaker has been located.
Product 1: Operates on 90-120V AC circuits.
Product 2: LARGE CLEAR LCD READOUT on receptacle tester to instantly view results without the need to look at a chart to understand results.
Product 2: TEST GFCI TRIP TIME IN SECONDS to find out if the trip breaker is functioning.
Product 2: DETECT WIRING FAULTS of open ground, open neutral, open hot, dual open (neutral and ground), reversed hot/ground, and reversed hot/neutral.
Product 2: AUTO-HOLD FUNCTION is convenient for hard-to-reach outlets.

Check Stock

Faith 20A GFCI Outlet, Non-Tamper-Resistant GFI Duplex Receptacles with LED Indicator, Self-Test Ground Fault Circuit Interrupter with Wall Plate, ETL Listed, White

GFCI Outlet - Constructed with premium high-impact resistant thermoplastic materials and rational structure design, ensures superior strength and durability. it a single gang GFCI electrical box that supports a standard duplex, grounded receptacle.
Safe electrical GFCI outlet tester with TEST and RESET buttons and LED Indicator is designed to meet local and national electrical codes..
Safty - The ANKO GFCI USB Outlet meets UL-Listed YGB-094WR, 20 Amp, 125 Volt, 60HZ. Tamper Resistant Receptacle prevents young children from inserting unwanted objects into the outlets. For an added layer of protection, the GFCI regularly conducts an automatic internal test to confirm that it can respond to a ground fault, provides continuous ground fault protection..
Weather Resistant - Constructed with advanced UV stabilized engineering to provide superior corrosion, temperature, and UV resistance, preventing discoloration and aging, ideal for outdoor & indoor use. Ground fault circuit interrupter GFCI outlets are required in kitchens and bathrooms and within 25 feet of heating, air conditioning and refrigeration equipment to prevent electrical shock in areas subject to moisture..

Check Stock

Klein Tools CL110KIT Electrical Tester / Maintenance Kit w/Clamp Meter Continuity Tester GFCI Tester Line Splitter Case Leads 3 x AAA

Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads.
GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open....
Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord.
CAT III 600V, Class 2, Double insulation safety rating.
AC Auto-Ranging 400 amp digital clamp meter.

Check Stock

Bytcew HVAC Tools Kit Accessory for Circuit Breaker Finder Vacuum Pump, Ac Guages Clearance and Equipment, Compatible with Yellow Jacket 69522, 69411,RT310,RT250,RT310,ET300,ET310

【1】This Heavy-duty cables are upgraded with large crocodile clip which has a strong bite force to improve work stability and safety. It can be plugged in without a service power outlet . It is a necessary tool for HVAC training and kit..
【2】It is outlet tester, electrical tester, voltage tester accessories. The reliable circuit breaker finder kit is the perfect accessory for your circuit breaker tracker (Compatible With RT310, 69411, RT250, ET300 and ET310 digital circuit breaker finder)..
【3】It can replace running 100+Ft of cord and service power, When HVAC maintenance, engineers can directly take power from a disconnect box to complete the work..
【4】It has real Ground wire(GND) and alligator clip of high quality material, which guarantees our safety when using it. The alligator clips are sturdy and have a lot of tension to hold the wires tightly..
【5】UL Listed. Large Clip 0~30Amp, 20" Length,14AWG Adapter Cord for 120V AC Circuit..

Check Stock

Case Compatible with Klein ET310 Tool AC Circuit Breaker Finder 80041 Outlet Repair Tool Kit RT250 Integrated GFCI Receptacle Tester and Accessories Electrical Tools Bag Storage Organizer

Perfect Fit For: This case is specially design for Klein tools ET310 ac circuit breaker finder with integrated GFCI outlet tester, electrical tools case also fits for klein tools 80041 80016 Outlet Repair Tool Kit, RT250 receptacle tester, size: 8.25 x 5.25 x 2.7 inches. For sale is case only, not include the device and other accessories..
Comprehensive Protection: Circuit breaker finder bag is made of premium and extremely durable hard EVA material, which has a good waterproof and moisture-proof effect. Case for klein circuit tracer can protect for klein et310 from scratching, damaging, impacting, and falling. Please be assured use because of the hard material for klein tools storage case..
Reasonable Internal Mesh Pocket and Elastic Band Design: Zippered mesh pocket for klein circuit breaker finder case can protect circuit breaker finder accessory kit, circuit breaker leads, circuit breaker adapters from falling and losing. At the same time, the internal independent elastic band is specially designed for et310 klien and outlet tester. Don’t worry about the suitability for et310 klein tools. Elastic band has the function of shrinking and thick elasticity..
Compact and Convenient Design: Strong and classic zipper for klein breaker finder storage bag i....

Check Stock