ReviewsRed Dot Sights For Mp Shield

Monstrum Blackbird V2 1.5X Prism Scope | Black

  • The Monstrum Blackbird 1.5x Prism Scope is a prism scope optic with a fixed 1.5x magnification.
  • Offers similar functionality to red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produces less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Comes with an integrated 1.5 inch riser that mounts to any standard picatinny mounting platform.
  • The Blackbird 1.5x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock

Ade Advanced Optics Ruger 10/22 Red-Dot Sight Mount Fit Vortex Venom Docter Burris Fastfire Optics

  • This red dot sight fit ADE model RD3-006, RD3-009, RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium) red dot sights..
  • Also fit Doctor, Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots..
  • This adapter mount is designed to connect red dot optic sights to 10/22..
  • Aircraft grade Aluminum in Matte black finish..
  • Mounting hardware comes with screws and allen wrench..
Check Stock

Monstrum Marksman 2X Ultracompakt Micro Prism Scope | Black

  • Next generation prism scope optic with a fixed 2x magnification and a more compact prism optic design.
  • Offers similar functionality to red dot sights for rapid short range target acquisition, but uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produces less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Built atop our all-new Ultracompakt prism optic assembly – 27% shorter and 3% lighter than previous generation prism scopes.
  • 10 ounces in weight and 4 inches in length with an integrated 1.5 inch riser mount for true cowitnessing with your front sight.
Check Stock

AR-15 Sounds

  • ...lloy housing, fogproof, shockproof and waterproof design greatly extend the lifetime of the sight. Fully multi-coated lenses, 11 brightness settings, 3 MOA Dot reticle, 1 inch riser mount and unlimited eye relief greatly improve target acquisition speed and accuracy..
  • Clearer & Brighter Red Dot: Different from other sights which use a cheap single lens, GODREAMIT red dot sight uses a high-quality achromatic doublet lens(also fully multi-coated lens), providing superior control for minimizing spherical aberration, reducing internal light loss and glare, ensuring even light transmission, making the red dot clearer and brighter. Allow you to achieve fast target acquisition more easily..
  • 11 Brightness Settings for Better Target Acquisition: Because of the high-quality materials and innovative structural designs, the brightness setting at each level is brighter than other cheap sights with 11 brightness settings. So you can easily adjust the red dot to the best brightness and quickly aim at the target..
  • Waterproof & Shockproof & Fogproof Design for Maximum Durability: The waterproof optics are O-ring sealed and will stay dry even go 30cm deep for 30 minutes. The high shock-resistant design makes the sight can withstand bumps, bangs, drops and the rough-....
Check Stock

AR-15 [Explicit]

  • ...lloy housing, fogproof, shockproof and waterproof design greatly extend the lifetime of the sight. Fully multi-coated lenses, 11 brightness settings, 3 MOA Dot reticle, 1 inch riser mount and unlimited eye relief greatly improve target acquisition speed and accuracy..
  • Clearer & Brighter Red Dot: Different from other sights which use a cheap single lens, GODREAMIT red dot sight uses a high-quality achromatic doublet lens(also fully multi-coated lens), providing superior control for minimizing spherical aberration, reducing internal light loss and glare, ensuring even light transmission, making the red dot clearer and brighter. Allow you to achieve fast target acquisition more easily..
  • 11 Brightness Settings for Better Target Acquisition: Because of the high-quality materials and innovative structural designs, the brightness setting at each level is brighter than other cheap sights with 11 brightness settings. So you can easily adjust the red dot to the best brightness and quickly aim at the target..
  • Waterproof & Shockproof & Fogproof Design for Maximum Durability: The waterproof optics are O-ring sealed and will stay dry even go 30cm deep for 30 minutes. The high shock-resistant design makes the sight can withstand bumps, bangs, drops and the rough-....
Check Stock

Mission First Tactical MFT Minimalist Holster for Glock 48 43x

  • RED DOT SIGHT RDS for Trijicon or Vortex or any brand work with this holster no changing sights just clip in and go.
Check Stock

CRUSHUNT Picatinny Offset Rail Mount 45 Degree Picatinny Rail Mount

  • 45 Degree Offset Rail allows the attachment of Lasers, Flashlights, Red Dot Sights or other Tactical Constructed of Solid Aluminum, Hard Anodized for....
  • Ergonomic Design gives easy access to on/off switches for Flashlights, Lasers, or Red Dot Sights..
Check Stock

M&P Shield 9mm/.40 w/TLR-6 Holster -Optic Cut- Inside Waistband Carry Holster for S&W Shield 9mm/.40 with TLR-6, Adj. Cant, Adj. Retention, Fit 1.5” 1.75” Wide Belt, NOT for MP9, NOT for EZ

  • 【S&W M&P Shield 9mm/.40 Holster Compatible with TLR-6】Custom Made for Smith and Wesson M&P Shield 9mm/.40 with TLR-6. NOT For MP9, NOT FOR EZ..
  • 【Optic Cut /Standard Model】There are Optic Cut and Standard Model available, and the Optic Cut Model will fit pistol with Red Dot/ Optical sights. Optics sights.
  • 【Hand Polished Edge for Comfort Carry】All the edges are polished and smooth to make you feel comfortable when it’s again the skin..
  • 【Fit both 1.5’’ and 1.75’’ wide belt】a 1.5’’ clip and 1.75’’ clip are both provided inside the package. And a Phillips screwdriver is also provided for easy retention adjustment..
  • 【TRIGGER GUARD COVER, NO RISK of PRESSING MAG RELEASE】Our precise Aluminum molds designed by our CAD engineers ensure exceptional consistency and accuracy of holsters, covering all access to the trigger, and uncovering mag release saving the trouble and danger of pressing it accidentally by pressure from holster..
  • 【FIT LIKE A GLOVE WITH AN AUDIBLE CLICK】Provide secure retention with tension-adjustment screws. A handful of grip makes your drawing and pulling quick and smooth without any scratch on slide..
  • 【ANGLE THE WAY YOU WANT WITH -5 TO 20 DEGREES ADJUSTABLE CANT】1.5” BELT CLIPS are rock, solid with ....
Check Stock

DPP Titanium Red Dot Mount/Plate/Adapter Compatible with Springfield XD Trijicon RMR/SRO&Holosun 407C/507C/508T

  • This Optic converter/adapter plate is made for any pistol slide that has a trijicon rmr optic cut, or optic plate can ONLY accept a trijicon rmr/sro....
  • Simply attach this adapter plate on the existing trijicon rmr optic cut as a regular optic plate. Screws are provided for over 25 popular red dot....
  • This adapter plate allow user to attach ADE RD3-006, RD3-09, RD3-012, RD3-013, RD3-018, RD3-019, Vortex Venom/Viper, Burris Fastfire 123, Sightmark....
  • Also compatible with Leica Tempus, Sig Romeo, Shield RMS/RMSC, Jpoint red dot sights..
  • Made in USA. This is the ONLY adapter(Made by ADE OPTICS) on the market to convert any pistol optic cut/plate that is with a trijicon rmr footprint,....
Check Stock

Monstrum Marksman 1X Prism Scope | Flat Dark Earth

  • The Monstrum Marksman 1x Prism Scope is a prism scope optic with a true fixed 1x magnification.
  • Offers similar functionality to 1x red dot sights for rapid short range target acquisition, but it uses a glass prism optical system with an illuminating circle dot reticle instead of the projected laser dots used in traditional red dot sights.
  • Prism scope reticles are etched in glass, produces less distortion than red dots, and are easier for the eye to focus on, especially for shooters with astigmatism.
  • Built atop the same platform as our 3x Marksman prism scope, it comes with an integrated 1.5 inch riser mount for true co-witnessing with your front sight and mounts to any standard picatinny mounting platform.
  • The Marksman 1x prism scope is covered by Monstrum’s lifetime warranty.
Check Stock

Monstrum Flip-Up Lens Cap Set | Compatible with Romeo5 / 1x20mm Red Dot Sights

  • Paired set of polymer flip up lens caps for use with 1x20mm red dot sights.
  • Compatible with all major makes and models 1x20mm style red dot sights.
  • Caps snap securely to the outer lips of your 1x20mm red dot sight.
  • Spring-loaded flip-up mechanism pops open effortlessly when needed and secures tightly into place when not in use - protecting your glass from dust and abrasion.
  • All Monstrum accessory products come with a lifetime guarantee.
Check Stock