ReviewsReduced Friction

Replacement Disc Tips, High Precision Fine Point Round Disk for 2 in 1 Series Stylus Pen, Clear (4 Pack)

Delivers extreme precision and the transparent disc lets you see through on the screen of where you are pointing..
Specially designed to draw, write, mark, copy, and paste with incredible responsiveness and accuracy..
Low-friction tip provides you with art-like precision and full control..
Greatly reduced the friction on the screen, as well as long-use of screen scrape..
24/7 Fast and easy-to-reach customer service to solve your problems within 24 hours..

Check Stock

TaylorMade SIM MAX-D Fairway, #3, 16 Degree Loft, Left Hand, Regular Flex

V Steel Sole Design: Designed to improve turf interaction through reduced friction and provides additional versatility when playing from tight or difficult lies.
Twist Face: Uses corrective face angles designed to overcome inherent golfer tendencies on mis-hits and to produce straighter shots.
C300 Ultra-Strong Steel Face: High-strength C300 steel allows for a stronger, faster face for explosive speed performance.
Speed Pocket: Allows for increased sole flexibility and designed to provide additional ball speed and forgiveness on low-face mis-hits.
Draw Technology in 3-Stages: Provides up to 10 yards of draw bias through (1) the manipulation of divergent face/topline masking, (2) CG movement towards the heel and (3) slightly reduced face progression.

Check Stock

Moog DS1439 Tie Rod End

GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants.
PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.
STRONG and DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates.
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on.
Designed as original equipment replacement for stock vehicles.
All parts meet or exceed OEM (original equipment manufacturers) standards.

Check Stock

ACDelco Professional 530-298 Premium Gas Charged Front Shock Absorber

A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life.
Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control. Dust Shield.
Fits: GMC- 2007 Sierra 1500 Classic, 2001-2004: Sierra 2500 HD, 1999-2006: Sierra 1500, 1999-2004: Sierra 2500.Chevrolet- 2007 Silverado 1500 Classic, 2001-2004: Silverado 2500 HD, 1999-2006: Silverado 1500, 1999-2004: Silverado 2500.

Check Stock

ACDelco Professional 530-189 Premium Gas Charged Rear Shock Absorber

A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life.
Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life.
Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks.
Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod.
O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control.
Fits: Chevrolet- 1988-2003 C3500, 1988-1999: K1500, C1500, 1988-2000: K3500, K2500, C2500. GMC- 1988-2000: K3500, K2500, GMC C3500, GMC C2500, 1988-1999: GMC K1500, GMC C1500,.

Check Stock

Koyo NTA-512 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 5/16\ ID, 3/4\ OD, 5/64\ Width, 2.5lbf Static Load Capacity, 15lbf Dynamic Load Capacity

Thrust needle roller and cage assembly for applications with high dynamic loads.
High axial load capacity with reduced cross-section for use in restricted spaces.
Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise.
Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads.
Meets ANSI/ABMA standard 21.2 for quality assurance.

Check Stock

Shimano Sedona 5000FI XG; Freshwater Spinning Fishing Reel

...ally eliminates body flexing. The result transforms the angler's actions directly into cranking power. Iy'ss efficiency through strength..
SVS Infinity - Shimano's newest innovation in brake system technology, SVS Infinity provides easy-to-manage, consistent spool control and brake force. With weights that use inner friction against the raceway during the cast, SVS Infinity controls spool speed for precision casting especially when using lighter lures. The external adjustment knob provides for quick, precise adjustments for either the conditions or when you switch baits.
S3D Spool - This technology leads to reduced spool vibration. By designing a balanced and uniform thin wall aluminum constructed spool, S3D creates an incredibly smooth feel casting and retrieveing lures.
Super Free Spool - Was designed to eliminate friction on the spool shaft during the cast. In standard baitcasting reels, hen the clutch bar is pressed down, the pinion gear is freed and actually can drag on the spool shaft creating friction that can limit the length of the length of the cast. With Super Free, the pinion gear is supported by a ball bearing so that when the clutch is disengaged for a cast, the pinion gear and spool shaft are kept in perfect alignment..

Check Stock

Koyo NTA-916 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 9/16\ ID, 1\ OD, 5/64\ Width, 4.1lbf Static Load Capacity, 1.39lbf Dynamic Load Capacity

Thrust needle roller and cage assembly for applications with high dynamic loads.
High axial load capacity with reduced cross-section for use in restricted spaces.
Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise.
Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads.
Meets ANSI/ABMA standard 21.2 for quality assurance.

Check Stock

Union Butterfield TN1585(UNC) High-Speed Steel Spiral Point Tap, TiN Coated, Round with Square End, Plug Chamfer, H5 Tolerance, 3 Flute, 1/4\-20 Thread Size

Spiral point tap pushes chips ahead of tool to reduce clogging.
Spiral point and straight flutes for cutting threads in through holes.
Titanium nitride (TiN) coating combines hardness with low friction for extended tool life and faster cutting.
Relieved-style design reduces friction between tap and workpiece for reduced tool wear.
Plug chamfer for easier starting and correct perpendicular alignment.

Check Stock

Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor, 2-Pack

BUNDLE INCLUDES: 2 x Diablo 7-1/4 inch x 60-Tooth ATB Ultra Finish Saw Blade with 5/8 inch Arbor.
TiCo HI-DENSITY CARBIDE TOOTH: TiCo Hi-Density Carbide specifically designed for each application to provide maximum performance and cutting life.
BUILD FOR ACCURACY: Tri-metal shock-resistant brazing allows the carbide tips to withstand extreme impact for maximum durability. The blade produces a remarkably clean, chip-free cut that requires little to no sanding.
REDUCED FRICTION: A permanent Perma-SHIELD non-stick coating protects the blade from heat and corrosion, reduces friction and pitch buildup.

Check Stock

250mm Ball Screw SFU1204 Diameter 12mm,4mm Pitch with Metal Ball Screw Nut for CNC Machine

End Machined ballscrew SFU1204-250mm L with nut+BK10/BF10+Ball nut Housing+Coupler.
【FINE WORKMANSHIP】The ball screw is made of high-quality and durable steel that is wear-proof and resistant to high temperatures. Compact design and easy to mount and dismount..
【LOW FRICTION】The part bears very little sliding friction between the nut and screw, and therefore longer service life..
【HIGH MECHANICAL EFFICIENCY】No stick-slip effect.
【MUTE OPERATION】The ball screw kit features an accuracy grade of C7 with bearing fits less than 0.03 mm, making little noise while running,more accurate positioning..

Check Stock