ReviewsReduces Thread Engagement Torque

Simpson Strong-Tie #8 x 3\ Type 316 Stainless Steel Flat Head Wood Screw - 1,750 pc Bulk Pail - Star Drive - T08300WPFB

  • Type 316 Stainless Steel for Marine Conditions.
  • Unique "Box" Thread Design with Raised-Ridge Technology greatly reduces torque, saving battery.
  • Specially-designed sharp point pentrates hard wood products with ease.
Check Stock

ITW Brands ITW 24326 Tapcon Maxiset 1/4 in x 2-1/4 in Hex Head Concrete Anchors Silver 50-per Pack

  • Works in all masonry-based material including concrete, block or brick.
  • Use these screws for a variety of projects including fixing shutters, screened porches, pool enclosures.
  • Ultrashield finish delivers long-life corrosion resistance.
  • Chisel edges accurately cut threads into concrete allowing for consistent driving performance and back holding power.
  • Advanced thread form reduces installation torque by 30%, allowing for use in a wider range of materials.
Check Stock

Powerbuilt 648906 4\ Gear Puller

  • Max reach: 3-3/8-in max spread: 4-in. Reversible two-jaw design for inside or outside pulls. Chrome vanadium steel yoke and jaws.
  • Fine thread center bolt for maximum torque and minimal effort.
  • Reversible two-jaw design for inside or outside pulls.
Check Stock

SENCO 06C100C 6-Gauge x 1 in. Collated Drywall to Heavy Steel Screws 1,000-Pack

  • Deep 6-lobe recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs.
  • Redesigned tip and thread pattern provides easy starts and up to 25-percent less torque while driving, which results in up to 20-percent faster driving.
  • The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks.
  • WSV screws can be easily backed out, allowing for future access to floor cavities.
Check Stock

Nexen 801516 Open Air Engaged Torque Limiter

  • Manufacturer Description: TL30A/2*1.125 BORE,AIR.
  • Number of Engagement Positions: 1 at 360°.
Check Stock

Black Engine Billet Motor Torque Mount Bracket kit for B16 B18 B20 D16

  • CNC machined from billet 6061-T6 aircraft aluminum and come with High Density Wear Resistant Polyurethane bushing inserts, with billet aluminum bolt sleeves..
  • Torque mounts will greatly reduce engine movement and allows for better shifting and clutch engagement as well as less chance of parts breakage..
  • Engine Billet Motor Torque Mount Fits 1992-2000 Honda Civic EG EK B-Series D-Series B16 B18 B20 D16.
  • Package Content : 2 x Torque Mount and Screw kit.
Check Stock

Quick Screw Gutter Hangers 5 Inch- 50 Pack - 5 Inch Gutter Clips with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters

  • ...spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
  • HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
  • EASY INSTALLATION W/ NUT DRIVER - Install the 5 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
  • INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. The recommended hanger spacing is 24" on centers..
Check Stock

Quick Screw 6 Inch Gutter Hangers - 25 Pack - Gutter Brackets 6 Inch with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters

  • ...spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
  • HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
  • EASY INSTALLATION W/ NUT DRIVER - Install the 6 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
  • INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. The recommended hanger spacing is 24" on centers..
Check Stock

2pcs 5mm Hubcentric 4x114.3 Wheel Spacers (66.1mm bore) Compatible with Nissan 200sx 240sx 240z 260z 280z 280zx 300zx Altima Maxima Sentra Cube (4x4.5)

  • ...heck Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 4x114.3 (4x4.5") | Hub Center Bore: 66.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust..
  • [PRODUCT BENEFITS] Hubcentric Spacer Bore fits perfectly around 66.1mm wheel hubs to prevent wobble or vibrations. Fixes clearance issues if your wheels are making contact with your shocks or brake calipers. Increases inner wheel well clearance to allow installation of wider rims/tires. Gives yo....
Check Stock

StanceMagic - 5mm Hubcentric 5x114.3 Wheel Spacers (67.1mm Bore) Compatible with Hyundai Genesis Tiburon Veloster, Kia Optima, Mazda 3 5 6 MX-5 Miata RX-8 Protege Mitsubishi Jeep (2 Pack)

  • .... May fit others, verify using spacer specs..
  • [VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
  • 2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
  • 3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
  • 4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Center Bore: 67.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust..
  • [PRODUCT BENEFITS] Hubcentric Spacer Bore fits perfectly around 67.1mm wheel hubs to prevent wobble or vibrations. Fixes clearance issues if your wheels are making contact with your shocks or brake c....
Check Stock

RockTrix 2pcs 1/2 inch 8x170 and 8x6.5 Flat Wheel Spacers - Compatible with Chevy Ford GMC Hummer Dodge (See Description for Year Model) - 8x165.1 and 8x170 Silver Aluminum

  • ...icle as long as: 1) Vehicle has either 8x6.5" (8x165.1) or 8x6.69" (8x170) bolt pattern.
  • 2) Vehicle Hub / Centerbore is no larger than 4.92" (125mm).
  • 3) You have 1/2" (12mm) of space between your fender and your wheel/tire.
  • 4) Your wheel studs are the correct length to ensure safe lug nut thread engagement..
  • [FITMENT] For 8-Lug Trucks and SUVs, however they will Not Fit Dually / DRW / Dual Rear Wheel. Compatible with Ford F250 F20 Super Duty, F350 F350 Super Duty, Excursion. Compatible with Chevrolet K2500 K3500 C2500 C4500, Express 2500 3500, Silverado 2500 2500-HD, Silverado 2500 2500-HD. Compatible with GMC Savanna 2500 3500, Sierra 2500 2500-HD, Yukon CL 2500. Compatible with Dodge Ram 2500 3500. Check description for model years. May fit other vehicles. Verify with spacer specifications..
  • [SPECIFICATIONS] Set of Two (2) Spacers | Thickness: 1/2" (12mm) Wide | Bolt Pattern: 8/6.5" (8/165.1) and 8/6.69" (8/170) | Hub Center Bore: 125mm (4.92") | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion....
Check Stock