ReviewsReflex Reflector Mould

Truck-Lite 5800AA Incandescent Light (Signal-Stat 5800 Series Yellow Square Dual Face, Side Marker, 1 Bulb, 3 Wire, Pedestal Light, 2 Stud, Black, Stripped End)

  • Polycarbonate Snap-On/snap-off lens - no screws.
  • Combination side marker lamp and reflex reflector lens.
  • Unbreakable, easy bulb replacement one lens sealed, one lens snaps on/off.
Check Stock

Partsam LED Pedestal Lights Amber/Amber Double Face 39 LED Turn Signal Lights Stud Mount Fender Lights Side Marker Lights for Heavy Truck Trailer Freightliner Peterbilt Kenworth Mack Western Star

  • Package includes 2Pcs Square 39 LED Double Face Led Pedestal Fender Turn Signal Lights with Dual Mounting Studs: 39 Total LED's and 3 Amber Side Marker LED's.
  • Heavy Duty Chrome Plated Housing, Reflector Design.
  • Versatile multi-directional mounting design (up/down/sideway) to turn the light 90 or 180 degrees.
  • universal stud mount design with interchangeable single or double studs.
  • This Dual-face trailer light is AMBER on both sides! Although in most states in the US it is required for pedestal lights such as this to have an amber face to the front and a red face to the rear, there are some exceptions!.
  • This amber square dual-face trailer light serves functions: Parking and rear turn signal light.
  • Built-in reflex reflector removes the need for separate reflector and Perfect lights to mount on your truck or trailer side fenders.
  • This double face fender light is hard-wired with three plain wires: easy to install with their double stud bolts: White Wire--Negative.
  • White + Black--Full light on, 50% low brightness and function as parking light and side marker lights.
  • White + Red--Back & Front light on, 100% high brightness and function as turn signal lights.
  • This square Led Pedestal Lights can fit for: Freightliner Casc....
Check Stock

Partsam 10Pcs 4 Inch Trailer Rectangular Led Side Marker Clearance Lights 6 Diodes w/Reflex Lens [DOT Certified] Sealed 2x4 Reflective Led Marker Lights Surface Mount for Truck Lorry Van Camper 12V

  • Built-in reflex reflector removes the need for a separate reflector.
  • DOT Approved. Function as side marker lights, clearance lights or identification light, Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan Boat Trailer Marine Lorry Bus etc..
  • Features sonically sealed, waterproof lens and housing in a single unit.
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces..
  • Light Size: 101mm x 49mm x 23mm (4'' x 2'' x 1'').
  • Please Kindly Note: we have 2different types of this light: one with black& white wire, and wires come out from side of bottom base,white is Negative while Black is Positive.
  • the other one with red& black wire, and wires come out from middle of bottom base,Black is Negative while Red is Positive. Both are the same quality, and will not affect your usage..
Check Stock

Partsam 2Pcs [DOT Certified] Amber 4 Inch LED Trailer RV Camper Side Marker Clearance Lights Lamps 6 Diodes with Reflex Lens Surface Mount Reflective 2x4 Rectangle Truck Marker Lights Front Rear

  • Partsam (2 x Amber) side marker LED clearance lights, each light with 6 LEDs inside.
  • 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Snap-on, replaceable, durable lens with white base. Surface mount . 2-Wire design.
  • DOT Approved. Function as front / Rear clearance Lights Lamps, side marker lights or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc..
  • Features sonically sealed, waterproof lens and housing in a single unit.
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces..
  • Light Size: 101mm x 49mm x 23mm (4'' x 2'' x 1'').
  • Please Kindly Note: we have 2different types of this light: one with black& white wire, and wires come out from side of bottom base,white is Negative while Black is Positive.
  • the other one with red& black wire, and wires come out from middle of bottom base,Black is Negative while Red is Positive. Both are the same quality, and will not affect your usage..
Check Stock

Partsam 2Pcs Red 4 Inch Oblong Led Clearance and Side Marker lights Lamps with Reflex Lens [DOT Certified] RV Camper Surface Mount, Sealed 2x4 Reflective Rectangular Rectangle Led Marker Lights 12V

  • Partsam (2 x Red) side marker LED clearance lights, each light with 6 LEDs inside.
  • 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Snap-on, replaceable, durable lens housing with white base. Surface mount. 2-Wire design.
  • DOT Approved. Function as front / rear clearance lights Lamps, side marker lights or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc..
  • Features sonically sealed, waterproof lens and housing in a single unit.
  • Two-wire design includes both lead wire and ground wire for mounting to all surfaces..
  • Light Size: 101mm x 49mm x 23mm (4'' x 2'' x 1'').
  • Please Kindly Note: we have 2different types of this light: one with black& white wire, and wires come out from side of bottom base,white is Negative while Black is Positive.
  • the other one with red& black wire, and wires come out from middle of bottom base,Black is Negative while Red is Positive. Both are the same quality, and will not affect your usage..
Check Stock

Partsam LED Amber Yellow Front Fender Side Marker Lights Lamps Assembly Smoke Lens for 1997 - 2006 Wrangler TJ Smoked Led Marker Turn Signal Parking Lights Lamps Left+Right 55155629AC 55155628AC

  • ... lights. Each side marker built in 18pcs 3528 Amber LED Chips. Smoke lens makes them almost blend perfectly into the fenders, gives your vehicle a great stealthy look. Amber LEDs illuminate in a nice circular pattern, makes the Wrangler marker lights a unique look at night.
  • And these side indicators built in reflex reflector lens, which removes the need for a separate reflector.
  • Easy to install: Plug and Play insert to install, Non-polarity sensitive. Just remove the stock housing bulbs and insert the upgrade version Wrangler marker lamps plug into your existing wiring harness, Fit great in your new fender flares.
  • Warranty: We truly offer 1 year warranty for Wrangler tj marker lights! If have any questions or issues about our Partsam led lights, Please feel free to us and we will reply in 24 hours.
Check Stock

10Pcs 4 Inch Marker Light 6 LED Rectangle Trailer Side Lamp Clearance Marker Light, Sealed 2x4 Reflective Rectangle Led Marker Lights Surface Mount for Truck Lorry Van Camper 12V (5 Amber + 5 Red)

  • ...mber) side marker LED lights, As clearance Lamps, side marker or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc..
  • 【LED Light】- Side marker LED clearance lights, each light with 6 LEDs inside.
  • 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Wires come out of the back of the light.Snap-on, replaceable lens and surface mount white base..
  • 【High Quality】- Every Kit Features Super Strong ABS Plastic Lenses which have been UV treated so they will not fade from prolonged exposure to sunlight and weather elements. Sealed & waterproof assemblies. IP67 Waterproof DOT Certified.
  • 【Easy To Install】- we have 2different types of this light: one with black& white wire, and wires come out from side of bottom base,white is Negative while Black is Positive.
  • the other one with red& black wire, and wires come out from middle of bottom base,Black is Negative while Red is Positive. Both are the same quality, and will not affect your usage..
  • 【Quality Service】-If the product fails, cracks, stops working or any other problems, simply contact us for a free replacement. Or if you get any problems, we will give you a satisfactory response....
Check Stock

Nilight - TL-16 2PCS 3.9 Inch 3 LED Truck Trailer Amber Light Front Rear LED Side Marker Lights Clearance Indicator Lamp Perfect Sealed Waterproof Surface Mounted LED Marker Light, 2 Years Warranty

  • ...light indicator light on any 12V pickups truck trailers SUV RV van caravan camper boat lorry bus etc..
  • Upgraded LEDs: Use 3 quality Piranha LED, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber light.
  • Awesome Reflector Design: The marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance.
  • Highly sealed: Lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. Be ready for all weather abuse.
  • To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole.To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling a center holeTo run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling a center hole. To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the ba....
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock