ReviewsRefractory Fibre

Ducati Corse SBK 3 Full Face Helmet 981040166 (XL, BLACK)

SFL (Super Fibre Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard Fibre’ although it actually is Super fibre. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight Ergonomic shape. The natural shape of the outer shell lends the Arai helmets a more homogeneous look, ensures greater sealing and better fit on the head, for improved comfort and wearability and minimised turbulence.
Emergency Release System: both cheek pads and the neck roll can be removed quickly thanks to the advanced Emergency Release System Detachable, washable hypoallergenic inner lining Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier..
VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model.

Check Stock

Ducati 77 Full face Helmet 98104677 (L)

SFL (Super Fibre Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard Fibre’ although it actually is Super fibre. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
Detachable, washable inner lining Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure.
Wider visor for a perfect peripheral vision. The wider visor aperture gives better visibility on bends CE-approved thermoformed visor, scratchproof and anti fog VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model.
* This product meets or exceeds Federal Motor Vehicle Safety Standard 218 (FMVSS 218).

Check Stock

Pertronix 91181 45011 Ignitor II Adaptive Dwell Control and Flame-Thrower II - 45,000 Volts .6 Ohm Coil Kit for Delco 8 Cylinder

.【Ultra High Strength Refractory Steel】Compared to other burners, this weeding gun head is made of durable refractory steel. The dual adjustment system of the flow valve and turbo trigger allows you to control the flame with one hand and is easy to operate..
【Powerful Propane Weed Killer Torch】Piezoelectric ignition for safety, easy heating above 3400°F, and a maximum heat output of 500,000 BTU. Equipped with ergonomic handle for more comfortable use..
【SAFE USE】Equipped with valve seal and 6.5ft long hose. Comes with 7/8"-14 TPI, left propane bottle fitting, 23/8" diameter steel plate. To ensure safety during use, we carry out strict quality control before shipment..
【Multipurpose】: Ideal for weed burning, roof asphalt melting burning, welding, snow melting, paint removal, firewood burning and burning, hair removal, home, garden, farm, industrial, construction applications...
【Ergonomic Handle】: Luxurious handle for improved usability. If you can't light it, make sure the flint cable is securely attached..

Check Stock

Simond Store Ceramic Fiber Insulation Board (2300 F) (1\ X 18\ X 24\), Ceramic Thermal Insulation Board for Wood Stoves Fireplaces Furnaces Forges Kiln Pizza Oven - Pack of 1

Aluminosilicate Refractory Ceramic Fiber Board measures 1” X 18” X 24” in size..
Maximum Use Temperature: 2300 F (1260 C) | Density: 20-24 lb/ft³.
Compressive Strength at 25% deformation - 78 PSI, Permanent Linier Shrinkage - 3.5% Max at 2200 F when exposed to 24 hours soaking heat, Loss of Ignition(LOI) at 1832 F : 4-7.
Easy to cut: This Board can be easily cut with knife & hacksaw blade and can be drilled and machined. This board is not as strong as firebrick, it dents easily..
Uses: High temperature Board is used to repair or build, Wood Stove, Fireplaces, Pizza Ovens, Kilns, Forges, Internal Baffle of Wood Stove, Pellet Stove, Backup Insulation of Refractory Bricks and Castable Linings, Furnace Hot Face Linings and Boiler Wall Insulation, heat shields, combustion chambers and fire protection. Commonly used to make target walls, front plates and floor insulation..

Check Stock

Simond Store Castable Refractory Cement 94% Alumina Dense, 3270°F Rated, High-Temp Castable Pre-Mixed Mortar for Foundry Furnace and Induction-44 Lbs.

EXCELLENT MECHANICAL STRENGTH: Characterized with improved particle size distribution, reduced water demand, 94% alumina density, helps to enhance its structural strength and resistance to thermal shock compared to castable of similar compositions..
HIGH THERMAL RESISTANCE: This castable refractory cement when applied offers high insulation value and can resist temperature up to 3270°F / 1800°C..
CHEMICAL RESISTANCE: It provides outstanding resistance to the penetration of acid, neutral, and basic slags..
ENHANCE EFFICIENCY: Because of the low thermal conductivity and good volume stability offered, it increases thermal efficiency of the equipment..
APPLICATIONS: Effective in applications at places with excessive wear and abrasive heating atmosphere. It can be used for thermal combustors, chimney linings and Refractory castable is ideal for maintenance or construction of fireboxes or other combustion applications below 3270°F use to cast a dome, or inner hearth in a pizza oven. Can also be used to cast a hearth for a furnace..

Check Stock

Ducati Tour V4 Full Face Helmet 98107232 (M)

Hyper Ridge is a reinforcement band that circles the bottom of the shell adding strength and lowering the helmet’s centre of gravity. Flares out for easier putting on and taking off SFL (Super Fibre Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard Fibre’ although it actually is Super fibre. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
Emergency Release System: both cheek pads and the neck roll can be removed quickly thanks to the advanced Emergency Release System.
Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Detachable, washable interior made in fresh and light Dry-Cool material Hybrid multiple density foam EPS liner.
External shell in three sizes Racing closure with D-ring fastening, with button to secure the strap Reflective panels.
* This product meets or exceeds Federal Motor Vehicle Safety Standard 218 (FMVSS 218).

Check Stock

Ducati Tour V4 Full Face Helmet 98107232 (L)

Hyper Ridge is a reinforcement band that circles the bottom of the shell adding strength and lowering the helmet’s centre of gravity. Flares out for easier putting on and taking off SFL (Super Fibre Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard Fibre’ although it actually is Super fibre. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
Emergency Release System: both cheek pads and the neck roll can be removed quickly thanks to the advanced Emergency Release System.
Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Detachable, washable interior made in fresh and light Dry-Cool material Hybrid multiple density foam EPS liner.
External shell in three sizes Racing closure with D-ring fastening, with button to secure the strap Reflective panels.
* This product meets or exceeds Federal Motor Vehicle Safety Standard 218 (FMVSS 218).

Check Stock

Ducati Tour V4 Full Face Helmet 98107232 (XL)

Hyper Ridge is a reinforcement band that circles the bottom of the shell adding strength and lowering the helmet’s centre of gravity. Flares out for easier putting on and taking off SFL (Super Fibre Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard Fibre’ although it actually is Super fibre. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
Emergency Release System: both cheek pads and the neck roll can be removed quickly thanks to the advanced Emergency Release System.
Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Detachable, washable interior made in fresh and light Dry-Cool material Hybrid multiple density foam EPS liner.
External shell in three sizes Racing closure with D-ring fastening, with button to secure the strap Reflective panels.
* This product meets or exceeds Federal Motor Vehicle Safety Standard 218 (FMVSS 218).

Check Stock

Simond Store Portable Propane Gas Forge Single Burner Knife and Tool Making Blacksmith Farrier Forge with Stand

The Burner Nozzle is made from SS-304 material..
Heating zone is lined with 1 in. thick ceramic fiber blanket which is coated by Rigidizer, It can resist 2600° Fahrenheit (1425° Celsius Approx.) so we can say that it can reach up to welding temperature and it also reduce fuel consumption too, 1 in. thick refractory fire brick will be placed at the floor to provide superior strength, durability and resist high velocity firing, And all this refractory materials are easy to replace available to buy at our store.
Powerful burner gives out a neutral flame by leaving a small amount of oxygen for scaling, burner has High quality nozzle made from SS-304 for increase the efficiency of burner with the help of air chock valve (top of the burner) to create adjustable air flow control to get maximum combustion as you need a different quantity of air on different pressure you can adjust the air chock valve to regulate the specific amount of air to mix with the propane during combustion to reach forging temp..
You can check Pressure in manometer to adjust gas pressure from regulator to control gas consumption.
We give Complementary Ceramic Blanket Piece to insulate burner pipe (gap between burner and forge) which helps maintain heat inside forge.

Check Stock

Optic Fibre Cutter, Opitcal Fiber Cleaver Auto Return for Cold Connection

Practical Use: Can be widely used on 0.25mm, 0.9mm and 3.0mm optical fiber with 125μm diameter, the cleaver is useful..
Better Design: Auto blade return design along with waste fibre box brings more convenience to optical fibre cutting..
Safer Working: Also works effectively in preventing optic fibre from breaking, very safe and reliable in operation..
Reliable Work: The cutting angle is about 0.6°, which will meet your work needs for cold connection and hot melting..
Smart Cutting: Adopting tungsten carbide blade with high hardness to ensure cutting and high working accuracy..

Check Stock

Fiber Cleaver, Good Automatic Stainless Steel Fiber Cutter for Cold Splicing (Gold)

Good Material: Made of premium stainless steel and plastic materials with great hardness as well as service life..
High Accuracy: 0.5 degree cutting enables high accuracy and good flatness, simple to operate and high in efficiency..
Cutting: Suits for 0.25mm and 0.9mm cable, the neat cutting largely facilitate cold connection and hot melting..
Better Design: Auto blade return design along with waste fibre box brings more convenience to optical fibre cutting..
Practical Use: The cutting length is 9‑16mm, and the fibre cleaver also has 32000 cut life, very safe and reliable..

Check Stock