ReviewsRefrigerant Recharge Kit

R134a Refrigerator Freon Recharge Kit Including Rubber O Rings R134a Charging Hose with Gauge Piercing Tap Valve Refrigerant Can Tap for Car Home Air Conditioner Tools Supplies

  • Appropriate Size for Using: the Freon recharge kit has a proper size for you to apply, the piercing tap valve fits the pipes with a size about 1/4 inches, 5/16 inches, and 3/8 inches.
  • What’s more, the self sealing can tap can compatible with most canned valves.
  • Reliable Workmanship for Lasting Service: the refrigerant hose repair kit is made of metal, solid and hard, and can resist oxidation, firm enough to use for a long time, not easy to wear, rust, deform, or break, with exquisite workmanship to withstand the test of time and accompany you for a long time.
  • Wide Range of Usages: you can not only use the car refrigerant recharge kit in car air conditioning, but also for home use.
  • It can be compatible with R-134a, R-12, R-22 air conditioner, and is a nice supply for your air conditioner.
Check Stock

Sub-Zero Synthetic Automotive Refrigerant R-134a (18 ounces)

  • R134a KIT - Kit contains (2) 18oz cans of R134a refrigerant with stop leak and a reusable can tap with gauge. A total of 36oz of R134a is enough to recharge almost every vehicle, just 18oz is not enough if you have a completely empty system..
  • STOP LEAK - The stop leak in this kit is good for sealing leaks in rubber components such as o-rings. This is a basic stop leak and can not repair more severe leaks. Products like ZeroR Max Seal are much stronger and can even repair leaks in metal components..
  • CAN TAP & GAUGE - Reusable can tap and gauge for similar EZ Chill products. Note, this is NOT a universal can tap and can not work on common R134a threaded products. For a truely universal can tap check out the ZeroR brand of tools and refrigerants..
  • INSTRUCTIONS - Steps on product should be followed closely. With vehicle running and AC set to Max Cool, connect can to low side service port. Dispense refrigerant into system in short bursts, checking the gauge in between dispensing for proper charging levels..
  • LEGAL - Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans. R134a Refrigerant for MVAC use in 18oz self sealing valve cans..
Check Stock

Mtsooning R134a AC Recharge Hose Kit, Refrigerant Charging Dispensing Can Tap with Gauge 1/4’’ SAE Female Hose for R12 R22 Port for Auto Home Air Conditioner and Refrigerator Refrigerant System

  • ❄Wide Application: Mtsooning AC recharge Hose Kit fits for R134A R12 or R22 refrigerant. Used for auto home air-condition, with highly working performance..
  • ❄Accuate Guage: The Refrigerant Charging Hose Kit has 3 different scale readings for R134, R12 and R22, easy and convinent for your to use..
  • ❄Dimentions: The hose is 19 inch in length which is long enough for your recharing needs. The Dispensing Can Tap has 1/2’’ female x 1/4’’ SAE male adapter..
  • ❄High Quality: The R134A Valve made of corrosion-resistant metal and the hose adopted quality rubber material, features high pressure resistance and sturdy. Inside gasket to prevent leak..
  • ❄Package includes: 1/2’’ female x 1/4’’ SAE male can tap opener, 19’’ recharge hose with 2.7’’ length gauge and one 1/4'' SAE port side for R12/R22 Port ..
Check Stock

SURIEEN R134A A/C Charging Hose Can Tap with Gauge Refrigerant/Freon Recharging Hose Kit 1/4” SAE Port for Home & Car Air Conditioning Connect R134A R-12 R-22

  • ♛【R134A REFRIGERANT CHARGE HOSE】 The air conditioning refrigerant auto ac recharge kit with gauge fits for R134A R12 or R22 refrigerant,....
  • ♛【PREMIUM QUALITY】 High quality R134A refrigerant Charging Hose with strong construction. Made of high quality brass alloy and rubber, last....
  • ♛【EASY TO USE】Push & lock coupler with auto shut off, easy and convenient to use. Come with gauge for easily viewing during use and getting a....
  • ♛【DIMENSION】 59" long hose help reach workplace easily, 1/2 thread quick fitting for American and Europe. Locking base clamp help connect....
  • ♛【PACKAGE INCLUDES】R134A air conditioning refrigerant charging hose with gauge, 1Pc Universal Can Tap, and R134A quick coupler, 1/4" SAE M to....
Check Stock

Honey Well Genuine 8oz R1234YF Refrigerant (3 Freon Cans) & HD Brass Can Tap with Gauge

  • R134a KIT - Kit contains (2) 18oz cans of R134a refrigerant with stop leak and a reusable can tap with gauge. A total of 36oz of R134a is enough to recharge almost every vehicle, just 18oz is not enough if you have a completely empty system..
  • STOP LEAK - The stop leak in this kit is good for sealing leaks in rubber components such as o-rings. This is a basic stop leak and can not repair more severe leaks. Products like ZeroR Max Seal are much stronger and can even repair leaks in metal components..
  • CAN TAP & GAUGE - Reusable can tap and gauge for similar EZ Chill products. Note, this is NOT a universal can tap and can not work on common R134a threaded products. For a truely universal can tap check out the ZeroR brand of tools and refrigerants..
  • INSTRUCTIONS - Steps on product should be followed closely. With vehicle running and AC set to Max Cool, connect can to low side service port. Dispense refrigerant into system in short bursts, checking the gauge in between dispensing for proper charging levels..
  • LEGAL - Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans. R134a Refrigerant for MVAC use in 18oz self sealing valve cans..
Check Stock

Refrigerator Freon Recharge Hose with Gauge Kit-A/C R134a R12 R22,Universal Retrofit Valve,with BPV31 Bullet Piercing Tap Valve,R134a Self-Sealing Adapter for Home/Car A/C Refrigerant System (5)

  • R134A REFRIGERANT CHARGE HOSE WITH GUAGE:The ac freon charging hose equiped with the scale guage reading for r134/r12/r22 types freon, piercing r134a can tap to connect puncture r134a refrigerant cans male mouth, r134a service quick coupler port to connect car ac r134a service male port. Directly used for car r134a ac refrigerant system.
  • BULLET PIERCING VALVE KITS：BPV-31 Refrigerator Tap Valve Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31，A practical kit and convenient for you to use，Each kit including 1 piercing valve, 1 hex key, 2 adapters.
  • 【AC Retrofit Valve】The r134a refrigerant charge hose also can be used for home refrigerator ac refrigerant system through equiped with this ac retrofit valve.【RH R134a Self-Sealing Adapter】Through the r134a self-sealing adapter, the r134a can tap off the refrigerator charging hose can compatible with r134a self-sealing cans. Male to connect the r134a can tap, the female to connect self-sealing cans..
  • PREMIUM MATERIAL:Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use.both of the kit are made of corrosion-resistant meta....
Check Stock

Robinair 16009 134R DiscovR Refrigerant Identifier

  • Best defense against unknown refrigerant and the risks associated with unknown refrigerant is a refrigerant identifier.
  • Contaminated refrigerant can wreak havoc on any R134a recovery recycle and recharge machine.
  • Protect your A/C service equipment and know whether or not you have acceptable R134a refrigerant before servicing the vehicle.
  • DiscovR refrigerant identifier notifies you when the system contains excessive air.
  • Pass and fail lights clearly show if refrigerant is pure enough to be recovered.
Check Stock

ZeroR R134a_ Refrigerant_ Top-Kit for MVAC use in a 12oz Self-Sealing Container (3 Items)

  • R134a_ TOP OFF KIT - Included are (2) 12oz cans of R134a_ Refrigerant_ and 1 Heavy duty R134a_ Can Tap with Gauge. This amount of refrigerant_ is sufficient to recharge most systems that are low. Empty or large systems may require additional refrigerant.
  • USA MADE - All R134a_ from DiY Parts is made in the USA. Purchasing USA made refrigerants_ guarantee purity standards that will keep your A/C working for a long time.
  • NEW GAS - We purchase our R134a_ multiple times per year ensuring you get freshly made refrigerant_. Old refrigerants_ can begin to rust if there is any moisture present which is bad for your AC system. Complies with Section 612 of the EPA Clean Air Act.
  • SSV CANS - Our cans are equipped with the 50 State compliant self-sealing valve design. Now you can easily store partially used R134a_ cans!.
Check Stock

R134a Recharge Hose Kit with Gauge, 51'' AC Refrigerant Recharging Hose Measuring Kit, Self-sealing R-134a Can Tap Refrigerant Dispenser to R-12/R-22 port, Include R134a Low Side Quick Couple

  • [WIDE APPLICATION] -The air conditioning refrigerant auto ac recharge kit with gauge fits for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning..
  • [R134A CAN TAP] -Auto AC refrigerant can opener tap dispensing valve, 1/2" Acme Female R-H Thread and 1/4’’ SAE Male. Please note this is a puncture type can opener, self-sealing can tap, 51’’ charging hose, 200 PSI pressure gauge, and R134A Low side adapter..
  • [ADVANTAGE] -Come with gauge for easily viewing during use,Low side gauge monitors pressure to aid in getting a correct charge..
  • [PREMIUM QUALITY] -The R134A AC service hose kit is made of metal and high quality rubber material, with solid construction and stable performance..
  • [SERVICE GURANTEE] -Package include: 1Pc x R134a Charging Hose with Gauge Removable R134a Can Tap, 1Pc x R134a Low Side Quick Couple. If it fails, feel free to contact us any time..
Check Stock

BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port

  • BPV31 Piercing Valve for Bullet with R134a recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit)..
  • R134a recharge hose with gauge: 19" hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port..
  • BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
  • 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16" and 3/8". The valve is not created or sold by Bullet..
  • The hose is made of corrosion-resistant brass, won't wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. Our replacement hose kit has been well-tested by the manufacturer..
  • Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a..
Check Stock

LIYYOO R134a AC Refrigerant Recharge Hose Kit with Measuring Pressure Gauge and 1/2’’ Can Opener Tap Dispensing Valve Fit for Automotive or Home Air Conditioners and Refrigerator Refrigerant Charging

  • ▶ High quality r134a refrigerant recharge hose with gauge with strong construction.Using for home air-conditioning and car air-conditioning add refrigerant..
  • ▶ Tech Specs:Bottle Opener Thread: M14/1/2”ACME Recharge Hose Pressure: 600~3000PSI. Hose Length: 48cm/18.9 inches..
  • The R134a A/C service hose kit is made of metal and high quality rubber material, with solid construction and stable performance..
  • ▶ Come with gauge for easily viewing during use,Low side gauge monitors pressure to aid in getting a correct charge..
  • ▶ Provide high quality and professional parts and first class service, please check the parts and parts number before ordering! If you have any questions, please feel free to contact us via email! We will solve it for you in the first time!.
Check Stock