ReviewsReinforced Inconel Wire

Toledo Hydraulic Hose Cut Off Saw Model 14, 4.5 HP, 115V, 3500 RPM cuts up to 2\ - 6 wire

• Toledo Hydraulic is proud to bring you a medium to heavy duty hose cut off saw made in the USA..
• The HC14 cut off saw is designed for quick, easy cutting of industrial wire reinforced hose..
• Comes equipped with a 14" Scalloped blade, 4.5 HP Motor that runs at 3500 RPM..
• Handles rubber covered wire reinforced hose ranging in size up to 2" ID hydraulic hose..
• Handles 4" inner diameter for industrial hose..

Curtis Stone Dura-Pan 4-piece Chef's Square Saute Set (Turquoise Blue)

• U-shaped handle helps reduce heat absorption.
• DURA-PAN NONSTICK INTERIOR COATING: Specially formulated 5-layer titanium nonstick coating adds strength and durability.
• STAINLESS STEEL STEAMER TRAY AND WIRE ROASTING RACK: Large-capacity steamer can fit more food than traditional round steamer trays.
• Wire roasting rack has expandable handles for ease of lifting rack out of pan, or if not needed, they can lay flat.
• MADE OF FORGED ALUMINUM WITH STAINLESS STEEL DISC BASE AND REINFORCED RIM: Provides even heating across all pan surfaces.
• DOUBLE-RIVETED STAINLESS STEEL HANDLES: Stay cool under normal stovetop conditions.
• Reinforced rim offers added strength and durability to the pan’s body.
• Offers more than 4 times the strength of unreinforced nonstick coatings.
• Metal utensil-safe, though use of nylon, wood or silicone utensils is recommended.

SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length

• Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
• Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
• For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
• The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
• End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

SpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill

• Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
• The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
• For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
• The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
• End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Quickie Professional Wire Wound Corn Whisk Broom, Wire Wound Bristles for Multi-Surface Sweeping, Remove Dirt and Debris from Porches, Floors Decks, Driveways, Sidewalks

Drill America 33 Piece m35 Cobalt Reduced Shank Drill Bit Set (1/2″ – 1″ x 64ths), DWDCO Series

• 33 Piece Set with 1/2″ Reduced Shank Drill Bits.
• Effective in drilling tough, high tensile strength materials like stainless steel, Inconel, and titanium.
• Reduced Shank Drills expand the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes.
• 135 degree split point tip for self-centering and reducing thrust.
• Manufactured to Aerospace Standard 907 and display high red hardness, permitting speeds up to 30% greater than with conventional M2 high speed steel.
• Sizes include: 1/2″, 33/64″, 17/32″, 35/64″, 9/16″, 37/64″, 19/32″, 39/64″, 5/8″, 41/64″, 21/32″, 43/64″, 11/16″, 45/64″, 23/32″, 47/64″, 3/4″, 49/64″, 25/32″, 51/64″, 13/16″, 53/64″, 27/32″, 55/64″, 7/8″, 57/64″, 29/32″, 59/64″, 15/16″, 61/64″, 31/32″, 63/64″ and 1″..

SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated

• ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length.
• SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
• PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
• excellent cutting results and enhanced productivity.
• WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
• suitable for side milling, end milling, finish machining, etc..
• PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.

Flex-Hone Tool CHC5818 Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 5/8\ Diameter, 180 Grit (Pack of 1)

• The Flex-Hone for Chamfer Blending has the ability to blend and radius sharp edges and remove microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
• Designed to polish and radius the outer corners (the intersection of the chamfer and flange face) as well as the inner corners and hole.
• Polished and radiused chamfer surfaces have been shown to be very beneficial on critical rotating parts.
• Suitable for finishing titanium, inconel, super CVM and nickel based stainless steel alloys.

SpeTool 12411 4 Flutes Carbide CNC Square Nose End Mill, 1/4 inch Shank Diameter, 3 inch Long, Upcut CNC Router Bit with Coated

• Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
• The Square CNC End Mill With Flat Top 4-Flute, Carbide with TiAlN Coated Gives outstanding cutting performance and wear resistance.
• For CNC, Excellent performance to cut Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc, Up to HRC 55..
• The Route Bit Suit for CNC, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
• End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc. For better.

SpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL

• 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
• The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
• For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
• The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
• End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

SpeTool 5PCS 2 Flutes Square Nose End Mill Set Power Milling Machine Carbide Upcut CNC Router Bits Tiain Coated, 1/4 inch Shank, 2 1/2 inches Long Overall

• Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
• Flat Top with 2-Flute, Material: Solid Carbide with TiAlN Coated for HRC 55.
• For CNC Machine.Cutting Steel, Metal, Inconel, Stainless Steel, Titanium Alloy etc.
• The Endmill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
• End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..