ReviewsReliable J bolts

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

ARONOVA Battery Hold Down Sets,With Billet Aluminum Battery Tie Down Bracket And 18-8(304) Stainless Steel J bolts(Red, 8 inch bolts)

  • Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets..
  • Designed for batteries 6.89" (175mm) wide or slightly narrower..
  • Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks.
  • Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture..
  • Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries).
Check Stock

J-Bolt Post Hinge 6\ - Hinge Bolts Thru The Post Includes Nuts - J-Bolt Hinge has 5/8\ Male Pin - Fence Bolt Though Post Hinge - Quantity 2

  • Dimensions - 6" length (4.25" usable thread) - .625 diameter - 5/8" hinge pin - pin height ~1.5".
  • J-Bolt Hinge has 5/8" hinge pin to work with common gate frame hinges.
  • 6" Gate Hinge is made of galvanized steel to prevent rust and corrosion.
  • J-Bolt thru post hinges are easily adjusted even after the gate is installed.
  • Nuts for gate hinge are included - Washers are NOT Included.
Check Stock

MEROM Halo Bolt AC Adapter Halo Wall Plug Car Jump Starter Charger Cord Replacement Compatible with Halo Bolt 55720/58830/Halo Bolt 1201 Jump Starter/Bolt ACDC Wireless/Bolt Air Portable

  • 【Specification】For Halo Bolt car jump starter charger AC adapter with 5ft/1.5M long enough power cord, input AC 100V-240V.
  • 【Compatibility】This Replacement Halo Bolt Charger Compatible with HALO BOLT 57720/58830/HALO1201/ACDC 58830 Portable Charger, Car Jump Starter CEN TECH 4 IN 1/3 IN 1 CENTECH Portable Power Pack Battery.
  • Peak 350 AMP J7CS/J45TK 700 AMP J5C09/STA-J5C09/J312/DPS109/STA-DPS109 Jump Starter.
  • Solar Jump-N-Carry 660/KKC-660/JNC660/SOLJNC660-BF Jump Starter (NOTE⚠️Pls read carefully above selected models before order⚠️).
  • 【Quality Assurance】This Charger for Halo Bolt car jump starter is made of high quality materials, the wire adopt PVC material to ensure it has a great performance on tensile resistance, anti-aging, anti-corrosion, anti-cracking..
  • 【Security】This Replacement Halo Bolt charger is Tested, approved and certified by FCC, CE and ROHS, and designed with safeguard features against short circuiting, overvoltage, overcurrent, and internal overheating..
Check Stock

Steel J-Bolt Hinge Doors Gates 1/2 Inch Heavy-Duty Welded Hinge Heavy-Duty Driveway Gates for Welding on Larger Iron or Steel Gates, 2 Packs

  • J-Bolt Hinge is the perfect accessory for your iron gate or revolving door..
  • J hinges made of heavy and strong iron, you can use it for a long time..
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Product dimensions: please see product images..
  • Package Include: 2 Packs welded hinge, 2 bolts, 4 nuts, and 4 washers..
Check Stock

Signature Fitness SF-3 1,500 Pound Capacity 3” x 3” Power Cage Squat Rack Includes J-Hooks and Safety Straps Other Optional Accessories Red

  • Dimensions: 83.46" Height, 51.18" Width, 38.78" Depth.
  • Fully adjustable J-Hook and Safety Strap position - 47 vertical holes and "westside" spacing on bottom half of each upright pole allowing for the....
  • Built with 3"x3" 11-gauge steel - maximum stability and durability, holds up to 1,500lbs.
  • Includes multi-grip pull up bar along with bolts and instructions to bolt rack into the ground or floor.
  • Includes UHMW-coated J-Hooks and safety straps - 200 dollar value, free.
  • many additional accessories available for purchase.
Check Stock

Premium EZ-Mount Manual Hand Crank Cab Level Truck & Trailer Tarp Roller with Lock Lever (No Tarp)

  • PREMIUM EZ-MOUNT has a Heavy-Duty LOCKING LEVER and powder coated steel mounting brackets with an Aircraft Grade Aluminum roller axle that telescopes to exact bed width. Adjust from 60" out to 104". All mounting hardware and rope storing “J” hooks included.
  • POWDER COATED STEEL MOUNTING BRACKETS HAVE A HEAVY-DUTY LOCKING LEVER to keep tarp from un-rolling and the crank handle folds in to protect the handle from damage while driving. Mount to dump bed with included bolts or weld in place..
  • Front and rear rope storing “J” hooks are standard with our roller kit. Included tarp (unless ordered with No Tarp) is black mesh fabric, UV treated, PVC coated polyester fibers. Rust-proof brass grommets. Hems reinforced with 2” webbing double stitched.
  • Our PREMIUM EZ-Mount Tarp Roller Kit installs easily. The tarp roller has a slot to slide hex head bolts into for attaching tarp without having to remove roller. NO DRILLING REQUIRED!.
  • Crank handle can NOT fall off! PREMIUM EZ-Mount Tarp Roller Kit includes a mesh tarp (retention bow sold separately. Search for ATP1010) All items are shrink wrapped to prevent damage in shipping!.
Check Stock

DEWALT 20V MAX* Concrete Vibrator, Pencil (DCE531M1)

  • High-quality Material: Aluminum alloy housing, silver copper converter, all stainless steel bolts and nuts. Motor uses ferrite magnet and oxygen free copper rod for long term work..
  • Durable Cable: 42"SJEOW cable with SAE J-928 two pole connector.
  • Extra Screws: Comes with screws,nuts and bolts for easy mounting.
  • Applications: This totally sealed motor can be used in snow plough, vibrating screen or concrete mixer, etc.
  • Replaces D6515 , VBR100 , 3007416 for Most V-Box Spreaders.
Check Stock

Evergreen HB10401 Compatible With 96-05 Pontiac Chevrolet Oldsmobile Buick 3.1L 3.4L VIN J, E Head Bolt Set

  • Fits: 96-09 Buick Pontiac Oldsmobile Chevrolet 3.1 3.4 OHV Vin J E.
  • Made From Excellent Quality Materials and Manufactured to The Highest Quality specifications.
  • Design with Exacting Tolerances Increased Durability.
  • Properly Torque Bolts per Manufactures Specifications.
  • Follow Manufacturers Recommended Tightening Sequence, and Procedures For Head Bolt Replacement.
Check Stock

Biggun 20 pcs Shear Pins + 20 pcs Cotters Pins for Snowblower- 738-04124 and 714-04040 Replacement Shear Pin Kits Compatible with MTD Craftsman Cub Cadet Troy Bilt Snowblowers

  • Deflector knobs (2), bolts (2) + washers (2).
Check Stock

papababe Squat Rack 800 LB Capacity Power Rack 2\x 2\ Steel Power Cage Exercise Stand with 4 J-Hooks for Bench Press, Weightlifting and Strength Training

  • 800 LBS WEIGHT CAPACITY- Heavy-duty 2" x 2" and 11 - 12 gauge tubular steel frame construction with a 800 lb max weight capacity, you could make serious gains from this power cage and push pass your limits..
  • 33 ADJUSTABLE HEIGHT LEVELS- 33 vertical height settings allow for various adjustments of the J-Hooks and the safety bars, suitable for different exercise and people of different heights. From 17.5" to 68" height, you can use it for a squat rack and bench press, a pull-up bar and more..
  • ALL-IN-ONE STANCHION- All-in-one stanchion provides greater load bearing capacity, unshakable sturdier user experience and easier assembly than workout cage which have to be assembled from 2 separate poles..
  • UNSHAKABLE STURDINESS- 82" x 48" x 47"(LxHxW), 2" x 2" steel frame ensures a stable construction for years of use. Four bolt holes come with every foot of the cage, you can bolt the gym rack to floor easily..
  • HIGH QUALITY & SAFETY GAURANTEED- Adjustable J-hooks and 25.5" safety bars with combined weight capacity of 800 pounds and 26 adjustable height levels give you peace of mind as you focus on your strength training, also compatible with 7 ft Olympic bars..
Check Stock