ReviewsRelion Oxygen Meter

Apera Instruments AI480 DO850 Optical Dissolved Oxygen Meter Kit with 10 Ft Optical DO Probe Hassle-Free Testing Experience

  • Equipped with state-of-the-art Optical DO sensor: measures dissolved oxygen level in a reliable and effortless manner.
  • Minimal maintenance required. No need for solution refill or frequent membrane change..
  • Easy auto. Calibration for saturated air and zero-oxygen.
  • IP67 waterproof and dust-proof structure, ideal to be used in harsh environments.
  • Comes with a complete meter kit, including the DO meter, 10 ft optical probe, calibration cap, and a rugged carrying case.
Check Stock

TOPCHANCES Portable 0-200ml/min Digital Gas Air Nitrogen Oxygen Mass Flow Meter Gas Air Flow Rate Tester MF5712 Compressed Air Digital Display Tester for Inactive Gas

  • Ultra low power by batteries or optional external AC adaptor.Internal data storage for additional data safety..
  • Potable design with rotatable meter head and easy exchangeable mechanical adaptors..
  • Hygienic and oxygen safe copper body for various fluids.User programmable range alarm for safety and other monitoring/control functionality..
  • Applications:MF5706 Gas mass flow meter suitable for different gas(Like air, compressed air, oxygen, nitrogen, CO² and other inactive gas ect.)....
Check Stock

Metene Pulse Oximeter Fingertip, Blood Oxygen Saturation Monitor with Accurate Fast Spo2 Reading Oxygen Meter, Oxygen Monitor with Lanyard and Batteries (White)

  • Accurate And Reliable Detection:Using the most advanced MCU chip and sensor, blood oxygen signal is collected by photoelectric sensing principle. Only need several seconds to get measurement results, very accurate and reliable..
  • For Sports and Aviation Use Only : Suitable for sports enthusiasts and aviation use only , accommodates wide range of finger sizes - children to adult..
  • User Friendly Design: High quality transparent acrylic panel. The oxygen meter body is elaborately made of ABS material, very exquisite and compact. One button operation and shut down automatically without operation in 8 seconds. Large LED and backlight display make it very easy to read..
  • Lightweight & Portable: Metene fingertip pulse meter very light and easy to carry.This spo2 monitor is attached with detachable lanyard convenient to measure your oxygen saturation anywhere..
  • You Will Get1*pulse oximeter, Lanyard, 2*AAA Batteries, 1*User Manual and 1* worry-free after-sale service. Please feel free to contact us if any quality issue within 12 months after the day of purchasing, we will reach back as soon as possible and try our best to make you satisfied..
Check Stock

YSI DO200 Kit EcoSense DO 200 Dissolved Oxygen Meter Kit

  • Automatic temperature compensation|manual input for salinity and barometric pressure compensation|easy-to-replace screw-on cap membranes.
Check Stock

HQRP 4-Pack Humidifier Wick Filter Compatible with Relion WF813 fits Relion RCM832 RCM-832 RCM-832N, Equate EQ-2119-UL EQWF813 Humidifiers

  • HQRP® 4-pack Wick Humidifier Filter Replacement.
  • Measures approximately 3.75" x 5.5" x 1.1".
  • Compatible with Relion RCM-832, RCM-832N.
  • Replace your filter every 1 to 3 months for optimal performance.
Check Stock

Gas Flowmeter, LZQ-7 Flowmeter 1-10LPM Flow Meter with Control Valve for Oxygen Air Gas

  • INSTRUCTIONS -- This gas meter is connected to hose to measure unidirectional gas flow.
  • MADE OF HIGH QUALITY ACRYLIC -- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
  • IT IS SIMPLE TO USE -- It is simple to use, and has 8mm barbs for convenient connection to hoses.
  • MEASURABLE GAS -- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon.
  • MAINLY USED FOR -- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.
Check Stock

CONTEC LED CMS50M Pulse Oximeter,SpO2 and PR Value Waveform Blood Oxygen Neck/Wrist Cord

  • [Accurate & Fast Results]- Measures accurately and quickly spo2(blood oxygen saturation of arterial hemoglobin levels), pulse rate, bar graph and....
  • [Portable & Easy To Use] -The light-weight oxygen monitor is about 50g(with the batteries), you only need to put your finger in the fingertip pulse....
  • [Comfortable & Long Battery Life] -The CONTEC oxygen meter's fingertip clip use silica gel mairal,is soft and easy for a wide range of finger sizes,....
  • [Screen is easy to see and read] -The CONTEC pulse oximeter is intended for sports and aviation use only and is not a medical device. Please....
  • [What's Included] -The CONTEC pulse oximeter *1,Handy carry pouch*1,Long lanyard(Neck/Wrist Cord)*1,User manual*1..
Check Stock

Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery with Silver air Pump

  • There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank..
  • The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator to collect brine shrimp. Note that the direction of the inlet and outlet of the check valve must be installed correctly with the pipe, otherwise the air pump will not be able to discharge air..
  • The second way to provide oxygen to the brine shrimp from the bottom hole of the incubator. Please note the direction of the inlet and outlet of the check valve and the pipe must be installed correctly, otherwise the air pump will not be able to output air, and the trim valve needs to be opened. When the brine shrimp has hatched, first turn off the trim valve, then pull out the air pump tube from the trim valve, and then open the trim valve to start collecting brine shrimp.
Check Stock

Pulse Oximeter Fingertip, Blood Oxygen Saturation Monitor Fingertip, Portable Blood Oxygen Meter Finger Oximeter Finger with Pulse, O2 Monitor Finger for Oxygen

  • ACCURATE AND FAST This oxygen monitor can accurately determine your SpO2 (blood oxygen saturation levels), heart rate and pulse strength in 8 seconds and display it conveniently on a large digital LED display..
  • SPORT ENTHUSIASTSSuitable for mountain climbers, skiers, bikers, aviators or anyone interested in measuring their SpO2 and pulse rate while on the move. You should only use the pulse ox before or after your exercise. Also, you must remain stationary while the pulse oximeter measure your pulse rate and SpO2 levels.This device is for sports and aviation use only..
  • WIDE RANG OF APPLICATIONS & LONG BATTERY LIFEThis blood oxygen finger meter light and compact, accommodates wide range of finger sizes,low power consumption long battery life, automatic power off after 16 seconds..
  • CLEAR AND EASY TO READThis blood and oxygen monitor have LED display, you can read in high light clearly.Our finger oxygen sensor will check and display in real time SpO2, PR, Pulse bar graph which are very easy to understand..
  • SUITABLE FOR WIDE RANGE OF FINGER SIZESOur SpO2 saturation monitor can be used for finger chamber with SMART Senior. Pulse oximetry can used for all ages but more accurate works for ages 12 and above..
Check Stock

Replacement Car Exhaust Back Pressure Tester Gauge Meter DiagnosticTool Catalytic Converter Clog Test Gauge Kit

  • Car Exhaust System Back Pressure Tester Meter Diagnostic Tool Exhaust System Diagnostic Tool Exhaust Back Pressure Tester.
  • Adaptor fits into oxygen sensor hole enabling back pressure of mufflers and catalytic converters.
  • Gauge adapter threads into oxygen sensor ports (both 12mm and 18mm). Test at idle and at2500 rpm's. Pressure should be below 1.25psi at idle and below....
  • Higher readings indicate a restriction which should be corrected..
  • Package including? 1* SET OF Car Exhaust System Back Pressure.
Check Stock

NestBasics Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery kit Machine

  • There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank..
  • The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator to collect brine shrimp. Note that the direction of the inlet and outlet of the check valve must be installed correctly with the pipe, otherwise the air pump will not be able to discharge air..
  • The second way to provide oxygen to the brine shrimp from the bottom hole of the incubator. Please note the direction of the inlet and outlet of the check valve and the pipe must be installed correctly, otherwise the air pump will not be able to output air, and the trim valve needs to be opened. When the brine shrimp has hatched, first turn off the trim valve, then pull out the air pump tube from the trim valve, and then open the trim valve to start collecting brine shrimp.
Check Stock