ReviewsRemote Wireless Rf Transmitter

ALMOCN 4 Set 433MHz RF Wireless Transmitter and Receiver Kit High Frequency Super Regenerative Transceiver Module for Arduino Raspberry pi

  • Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor. The....
  • Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that....
  • Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high....
  • Frequency used to receive, decode and oscillation resistor should match with the transmitter..
  • Application:Usually used for remote control systems, such as Remote control rolling gates, smart car, smart home, etc..
Check Stock

Suraielec Remote Control Light Socket, E26 E27 Bulb Base, 100FT Range, Wall Mountable Wireless Light Switch for Lamps, Pull Chain Light Fixture, Pull String (3 Sockets 1 Remote, Shorter Version)

  • Standard E26/E27 cap works with most of lamps and bulbs.
  • 【 Programmable and Expandable 】 This remote light socket can be expanded with additional Suraielec wireless light switch and receiver kits.
  • lets you activate multiple bulbs with one transmitter or control one bulb with multiple transmitters.
  • adding more wireless remote switches is useful for creating 3-way or 4-way wireless switches that control a single lamp from multiple locations.
  • 【 Wall Mount Bracket Included 】 The updated shorter version light socket adds 1.97" length or height to the lamp.
  • install the wireless lamp socket simply by screwing it between bulb and original bulb holder.
  • mount the handheld wireless switch anywhere with the included mounting bracket.
  • the wireless light socket set is particularly useful for the elderly or anyone with mobility challenges.
Check Stock

Suraielec Remote Control Light Socket, E26 E27 Bulb Base, 100FT Range, Wall Mountable Wireless Light Switch for Lamps, Pull Chain Light Fixture, Pull String (5 Sockets 2 Remotes, Shorter Version)

  • Standard E26/E27 cap works with most of lamps and bulbs.
  • 【 Programmable and Expandable 】 This remote light socket can be expanded with additional Suraielec wireless light switch and receiver kits.
  • lets you activate multiple bulbs with one transmitter or control one bulb with multiple transmitters.
  • adding more wireless remote switches is useful for creating 3-way or 4-way wireless switches that control a single lamp from multiple locations.
  • 【 Wall Mount Bracket Included 】 The updated shorter version light socket adds 1.97" length or height to the lamp.
  • install the wireless lamp socket simply by screwing it between bulb and original bulb holder.
  • mount the handheld wireless switch anywhere with the included mounting bracket.
  • the wireless light socket set is particularly useful for the elderly or anyone with mobility challenges.
Check Stock

HiLetgo 5 Sets 433M Transmitter + Receiver Kit High Frequency Super Regenerative Transceiver Module for Burglar Alarm

  • Easy to use, nice range (using antenna on both), you can send strings (text) from one point to another. If you want to automate your house without....
  • Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that....
  • They work in pairs, meaning you need both a receiver and a transmitter to comunicate with each other.
  • Compatible with SparkFun’s 434MHz RF transmitter and RF receiver.
  • This Radio Transmitter & Receiver pair is perfectly matched to allow you to control items from a distance up to 500 feet wirelessly!.
Check Stock

DEWENWILS Remote Control Outlet Plug Wireless On Off Power Switch, Programmable Remote Light Switch Kit, 100ft RF Range, Compact Design, ETL Listed, White (2 Remotes + 5 Outlets Set)

  • 【 Hassle-free 】 Quick to install with tool-free set-up.
  • perfect for the elderly and those with limited mobility or back pain.
  • make your life convenient, safer, and energy efficient.
  • 【 100 ft RF Range 】 Strong RF signal works through walls and doors without any interference.
  • does not require line of sight between the remote controller and outlet plug with the individual ON/OFF button.
  • 【 Leave the Upper Outlet Available 】 Compact small size remote control electrical outlet switch takes up 1 wall socket only.
  • smaller than most of other indoor remote controlled outlet plugs.
  • new concise design fits for any room décor.
  • 【 Programmable and Expandable 】 Available to add extra handheld remotes, outlets and light sockets (Same Model Only).
  • transmitter and receiver have been pre-programmed for immediate use.
  • 【 Wireless Remote Control 】Remotely turn on/off indoor lighting fixtures, fans, chargers, lamps, hard-to-reach outlets, Christmas decorations, and other appliances with a push of a button.
  • wireless switch receiver set includes 2 remote switches and 5 outlet plugs.
Check Stock

Remote Control Switch DC 12V 30A Relay Wireless Control Switch, 433Mhz Remote Transmitter and Receiver Long Range Latching Switch for Electric Doors, Motor, Wireless Controller and Other Fields

  • 【Easy to Use 】the Working voltage: DC12V-48V (DC 12V 24V 36V 48V ). We have made transmitter and receiver working together and test it before ship it,when you get it don't need to do anything ,just install it.( We send Latched mode,that is press the button "on" is working/ON , press the button "off" is stop/OFF ).
  • 【Widely Use】This remote switch used in industrial control and security fields, such as light, motor, remote controller, wireless security alarm, windows,lifting equipment, electric doors, wireless door alarm,security industry machine , wireless controller, and other fields.
  • 【Signal】Wireless RF signal can pass through walls, floors, doors or windows. You can use two or more units in the same place. You can turn on/ off the receiver with transmitter from any place within a reliable distance(Max range is up to 164ft/50m with no obstacle)..
  • 【Learning code】 the Learning code has high-level security for its low repetitive rate and re-learn mode, it can delete the old code and re-learn a new code,when a remote control get lost,So you could always control of it..
  • the Package Include: 1 x Remote Switch , 2 x Remote Controls, 1 x Manual . as a seller of integrity, customer satisfaction is our lifelong pursuit, If you have any questions, y....
Check Stock

2 Pieces Car Key Cases Car Key Fob Vehicle Smart Keychain Case Holder Black

  • 5-Button replacement transmitter remote (Replacement for XT-11, XT-12, XT-21, XT-24, XT-57, XT-59, XT-60, XT-61, XT-62, XT-63, XT-65S, XT-72S).
  • FCC ID: H50T21 H5OT21 (Replacement for B23AT67, H50T20 H5OT20, H50T31 H5OT31, H50T33 H5OT33, H50T52 H5OT52).
  • AM, superheterodyne (SAW), 433.92MHz, clear LED lens (Blue, green, or red when LED on).
  • Works for CPX-RS1, CPX-RS2, DS-434, KE-120, RF-105KE, RF-1050KE, RF-1055KE, RF-215, RF-220, RF-225, RF-305, RF-310, RF-315, RF-350, RF-355, RF-405,....
  • NOTE: Button configurations may vary on remotes with different button layout than this remote.
Check Stock

Suraielec Remote Control Light Bulb Socket, Wall Mount Switch, E26 E27 Lamp Socket, No Wiring, 100FT Range, Wireless Light Switch for Lamps, Pull Chain Light Fixture, Pull String (Shorter Version)

  • ...ote: not for enclosed narrow lighting fixtures and doesn’t work with dimmer switches.
  • 【 Programmable and Expandable 】 This remote light socket can be expanded with additional Suraielec wireless light switch and receiver kits.
  • lets you activate multiple bulbs with one transmitter or control one bulb with multiple transmitters.
  • adding more wireless wall switches is useful for creating 3-way or 4-way wireless switches that control a single lamp from multiple locations.
  • 【 Up to 100ft in Open Area Strong RF Signal 】 Strong RF signal of this smart light socket adapter can work through walls and doors.
  • does not require line of sight while using.
  • up to as far as 100 ft wireless range in open area.
  • ideal for pull chains, closet, laundry room, basement, attic light, utility room, bedside lamps, garage, and more.
Check Stock

Shure SLXD4D Dual Channel Wireless Receiver (Transmitters Sold Separately)

  • ION: Before purchasing, please ensure that the wireless frequency band you select works in your area (refer to Shure website for details > search Shure Wireless Frequency Finder)..
  • COMPONENT ONLY: For this SLXD4 receiver to work, please make sure it matches the frequency band (style) on your SLX-D digital wireless transmitter..
  • WHAT'S IN THE BOX: (1) SLXD4D dual-channel receiver with antenna and rackmount accessories.
  • DIGITAL WIRELESS TECHNOLOGY: Digital predictive switching diversity. 44 MHz tuning bandwidth (region dependent). 32 available channels per frequency band (region dependent). Up to 10 compatible systems per 6MHz TV band.
  • 12 systems per 8 MHz band. RF Scan and IR Sync to quickly find an open frequency and link the transmitter to a SLX-D receiver. Easy pairing of transmitters and receivers over IR scan and sync..
  • SOUND QUALITY: Crystal clear 24-bit / 48 kHz digital audio. Extended 20 Hz to 20 kHz frequency response (microphone dependent) for natural and clear sound. Stable digital RF signal transmission. 120 dB dynamic range - excellent for vocals & acoustic and wind instruments..
  • APPLICATIONS: A variety of compatible microphone/instrument cable choices guarantees the right solution for a wide range of ....
Check Stock

Shure SLXD4D Dual Channel Wireless Receiver (Transmitters Sold Separately)

  • ION: Before purchasing, please ensure that the wireless frequency band you select works in your area (refer to Shure website for details > search Shure Wireless Frequency Finder)..
  • COMPONENT ONLY: For this SLXD4 receiver to work, please make sure it matches the frequency band (style) on your SLX-D digital wireless transmitter..
  • WHAT'S IN THE BOX: (1) SLXD4D dual-channel receiver with antenna and rackmount accessories.
  • DIGITAL WIRELESS TECHNOLOGY: Digital predictive switching diversity. 44 MHz tuning bandwidth (region dependent). 32 available channels per frequency band (region dependent). Up to 10 compatible systems per 6MHz TV band.
  • 12 systems per 8 MHz band. RF Scan and IR Sync to quickly find an open frequency and link the transmitter to a SLX-D receiver. Easy pairing of transmitters and receivers over IR scan and sync..
  • SOUND QUALITY: Crystal clear 24-bit / 48 kHz digital audio. Extended 20 Hz to 20 kHz frequency response (microphone dependent) for natural and clear sound. Stable digital RF signal transmission. 120 dB dynamic range - excellent for vocals & acoustic and wind instruments..
  • APPLICATIONS: A variety of compatible microphone/instrument cable choices guarantees the right solution for a wide range of ....
Check Stock

WallarGe Wireless Headphones for TV Watching with 5.8GHz RF Transmitter Charging Dock Plug and Play 100 Ft Wireless Range Rechargeable 20 Hour Battery Black with Red

  • The advanced 5.8G wireless RF technology is more stable than 2.4G or bluetooth, it allows the wireless TV headphone to be highly synchronized with the....
  • Plug and play, no need to pair. The set of TV headphone and RF transmitter dock are paired well in factory setting, you only need to confirm the....
  • Soft adjustable headband and comfortable ear pad will provide you a perfect wearing experience. The user-friendly design ensures you a long watching....
  • This WallarGe headphone has an embedded rechargeable battery that need not to be taken out. To charge it, just place wireless headphone on charging....
  • The whole set for order includes: 5.8GHz RF transmitter charging dock, wireless headphone, AC adapter, 2-Male to 2-Male RCA cable, 3.5mm to 2-Male RCA....
Check Stock