ReviewsRemovable Ssd

ORICO M.2 SATA B+M/B Key SSD Enclosure USB 3.1 Type C 5Gbps External Solid State Enclosure Adapter for 2280/2260/2242/2230 M.2 NGFF SSD 4TB Max, NOT Supoort PCIe NVMe/AHCI M.2 SSD -M2PF

  • Up to 5Gbps with UASP: ORICO M.2 NGFF ssd external case adopts control chip, with UASP acceleration protocol and USB3.1 Type-C output interface, reach up to 440+ MB/S write/read speed matched with your M.2 SATA SSD..
  • NGFF SSD Enclosure: Compatible with most M.2 SSD SATA based 2280/2260/2242/2230 B Key M.2 NGFF SSD up to 2TB such as Samsung 860 EVO / 850 EVO M.2 SATA III SSD, WD Green M.2 2280, etc..
  • Compatibility: Supports Window / Mac / Linux . This external hard drive case is suitable for connecting PC, smart phone, notebook computer, smart TV, smart router, PS4 and other devices. Plug and play, no driver needed..
  • Excellent Heat Dissipation: The copper bars with holes on the PCBA board rapidly radiating heat from internal SSD to external Aluminum case. The external case with heat exchange fin, for better heat dissipation under high-speed transmission..
  • More details: The LED indicator on nvme ssd enclosure shows working status of SSD. The lightweight and compact size making it easy to carry with you while on the go. NOTE: 【DOES NOT SUPPORT NVMe PCIe BASED M-Key and M&B-Key M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD.】.
Check Stock

QNINE PCIe SSD Adapter Card for 2013 2014 2015 2016 2017 MacBook Air Pro Retina, Hard Drive Controller Converter to Desktop PCI Express X4, Support Model A1465 A1466 A1398 A1502

  • The PCIe x4 adapter only support x4/ x8/ x16 pcie port.
  • can read data and write data in SSD, DO NOT SUPPORT AS THE SYSTEM STARTUP DISK..
  • SSD formated in Mac OS systerm can’t be compatible with Microsoft system,so new SSD without partition,ssd can’t be shown in table of “My Computer”, please use the Disk Manager in Windows to delete the old partitions and create a new partition..
  • Support : 2013-2017 Macbook Air(11″ or 13″) A1465 A1466 SSD..
  • Notice: Please make sure correct forward side pins (16+12) back side(14+11). Please make sure your SSD models before buying! It can not support 2010 and 2011 version MacBook Air A1370 and A1369 SSD,it can not support 2012 version MacBook Air A1465 and A1466 SSD,it can not support 2012 and Early 2013 Version MacBook Pro A1425 and A1398 SSD!.
  • Support : 2013-2017 Macbook Pro Retina(13″ or 15″) A1502 A1398 SSD..
Check Stock

GODSHARK PCIe SSD Adapter Card for 2013 2014 2015 2016 2017 MacBook Air Pro Retina, Hard Drive Controller Converter to Desktop PCI Express X4, Support Model A1465 A1466 A1398 A1502

  • can read data and write data in SSD, DO NOT SUPPORT AS THE SYSTEM STARTUP DISK..
  • Support : 2013-2017 Macbook Air(11″ or 13″) A1465 A1466 SSD..
  • SSD formated in Mac OS systerm can’t be compatible with Microsoft system,so new SSD without partition,ssd can’t be shown in table of “My Computer”, please use the Disk Manager in Windows to delete the old partitions and create a new partition..
  • Notice: Please make sure correct forward side pins (16+12) back side(14+11). Please make sure your SSD models before buying! It can not support 2010 and 2011 version MacBook Air A1370 and A1369 SSD,it can not support 2012 version MacBook Air A1465 and A1466 SSD,it can not support 2012 and Early 2013 Version MacBook Pro A1425 and A1398 SSD!.
  • The PCIe x4 adapter only support x4/ x8/ x16 pcie port.
  • Support : 2013-2017 Macbook Pro Retina(13″ or 15″) A1502 A1398 SSD..
Check Stock

Willhom M.2 NVME SSD Convert Adapter Card for Upgrade MacBook Air (2013-2017)

  • 1* M.2 NVME SSD Convert Adapter Card + 1* Screwdriver + 3* Screws included. The NVME SSD Convert Adapter is DIY kit for assembling an upgraded SSD replacement for MacBook with large capacity NVME SSD. ( DO NOT fit external SSD enclosure ).
  • Compatible with MacBook Air 11” A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13" A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
  • Require macOS 10.13 High Sierra or Later, NOT compatible with earlier than macOS 10.13 versions( 2010 2011 2012 27’’ and 21.5’’ iMAC A1419 A1418). Please use your original SSD to upgrade your macOS before installation.
  • Support M.2 NVME/AHCI SSD such as Samsung 960 EVO, Samsung 970 EVO/PRO, WD Black, Crucial P1, HP EX920, ADATA SX8200, Intel 600p series NVME SSD and so on..
  • Tips: macOS failed on resume from hibernating with some NVME SSDs of some brands. Have to turn off laptop all the time instead of close the lid and go.
Check Stock

Cotillon in E-Flat Major, D. 976 – Widerschein, D. 949 – Waltz (Albumblatt) in G Major, D. 844 – 2 waltzes, D. 980

  • Specially designed heatsink for PCIE NVME M.2 2280 size SSD or SATA M2 2280 size SSD. Also engineered to fit perfectly and easily into the PS5 SSD expansion slot..
  • Double-Sided Heat Sink. Cooling your SSD to a safe temp to avoid overheating and throttling, improving the performance of your SSD with 10°C – 30°C cooling effect.
  • Easy to Install. Suitable for various heights M.2 SSD. With 6 screws, fixed screws on two side of the heatsink, offer a better protection of your M.2 SSD.
  • Aluminum alloy, silver plating , anodic oxidation surface treatment.
  • Compatible with Samsung 990 Pro, 980 PRO, 850 EVO, 860 EVO, 960 EVO, 970 EVO, 950 PRO, 960 PRO, 970 PRO Series M.2 SSDs, WD Black SN850 SN770 SN750, XPG Gammix S70 Blade or other M.2 2280 SSD..
Check Stock

GODSHARK PCIe SSD Enclosure for 2010 2011 MacBook Air, USB 3.0 External Reader for A1369 A1370 SSD Adapter with Case, Support Model MC503 MC504 MC965 MC966 MC505 MC506 MC968 MC969

  • This PCIe SSD enclosure is a DIY kit for assembling a portable SSD with A1369/A1370 SSD 2010/2011 (6+12 pin)..
  • USB 3.0 high speed transfer or retrieve data from 2010/2011 MacBook Air SSD (6+12 pin)..
  • The enclosure was made of aluminum material, so the cooling function is much better, can realize the SSD’s potential of its full performance..
  • DO NOT fit for 2012 MacBook Air or Pro SSD (7+17 pin) and 2013 2014 2015 2016 MacBook Air or Pro Retina SSD (12+16 pin)..
  • If your SSD is MAC OS formatted, it isn’t compatible with Windows OS, so a new SSD without partition. It can’t be shown in “My Computer”. Please delete the old partition and create a new partition in “Disk Manager” in Windows..
Check Stock

Cable Matters Premium Aluminum 10Gbps Gen 2 USB C Hard Drive Enclosure for 2.5\ SSD/HDD with USB-C and USB-A Cables - Thunderbolt 4 / USB4 / Thunderbolt 3 Port Compatible with MacBook Pro, MacBook Air

  • USB C 2.5 External SSD Enclosure supports a 2.5" SATA SSD or HDD drive.
  • portable external hard drive in a sturdy aluminum housing protects the SSD drive and assists with heat dissipation.
  • Portable USB 3.1 SSD enclosure offers convenient and fast data back-up for temporary or long-term use.
  • Diagnose internal SATA SSD drives for replacement or repair with this SATA HDD adapter.
  • Tool free SATA hard drive enclosure offers a data transfer rate up to 10Gbps with a compatible computer.
  • 10Gbps data transfer rate is 2x faster than USB 3.0.
  • Thunderbolt 3 computer compatible with the included USB C cable.
  • Supports the maximum SATA III 6Gbps data transfer rate.
  • SSD hard drive USB C to SATA storage solution is compatible with Windows or Mac computers as a Thunderbolt 3 hard drive enclosure.
  • USB C SSD enclosure provides a cost-effective solution for adding additional memory without opening up your laptop.
  • UASP, TRIM and S.M.A.R.T support with compatible computers, drives and OS for increased data transfer speeds, improved CPU utilization and failure detection.
  • 10 Gbps USB C hard drive ENCLOSURE is compatible with SATA SSD or HDD drives up to 9.5mm, including 7mm.
  • SATA to Thunderbolt 3 hard drive enclosure is compatible with SATA drives such as the Samsung 860 EVO, Kin....
Check Stock

ORICO M.2 Enclosure for NVMe SSD, USB4.0 40Gbps Type-C to M Key B+M Key 2280 Aluminum External SSD Case Compatible with Thunderbolt 3/4 USB3.2/3.1/3.0/ Type-C-M2V01

  • 【Multiple Transmission Protocol 】ORICO M.2 NVMe SSD external case adopts dual-chip master which support USB4.0 and fully compatible with Thunderbolt 3/Thunderbolt 4 USB3.2/3.1/3.0/Type-C (USB2.0 and below not compatible)..
  • 【40Gbps High Speed 】With USB4.0 Type-C output interface, it supports the maximum transmission speed up to 40Gbps. The measured maximum continuous read speed can reach 2700MB/s, and the continuous write can reach 1400MB/s.（This data comes from ORICO laboratory. Please note that the speed is different in different environments.）.
  • 【Only for M.2 2280 NVMe SSD】ORICO M.2 SSD Enclosure is specially designed for M Key & B+M Key NVMe SSD up to 2TB capacity. The applicable SSD size is 2280. (Does not support NGFF SATA M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD.).
  • 【Easy to Use】You just loosen the screw of the cover, put your SSD gently into SSD external housing, then fix the cover with a screw and connect cable to start work. Plug and play. No driver needed. Compact and portable. Easy to carry with lanyard hole..
  • 【Universal Compatibility】ORICO M.2 SSD case includes supports Windows/ Mac / Linux system, not only for PC and laptop, but also for smart TV, smart router and PS4 etc. NOTE: To achieve thunderbolt speed, please use thu....
Check Stock

anidees AI Atomic Mini ITX Small Form Factor (SFF) Case, Triple-Slot and Two Vertical-Slot GPU, with Mesh Panels, Support 240 Radiator, AI-at-ITX (PC Case ONLY)

  • 【All Disassemble 】 Every part on the case can be removed by a screwdriver, it will be easy to make you what you want to do.
  • 【Excellent Thermal Efficacy】 Improve your system's cooling with a high airflow layout, complete with a steel grill front panel for optimal air intake, Support up to 6 x 120mm fans or 240 Radiator at the bottom.
  • 【 Wide Compatibility 】 Support mini-ITX motherboard.
  • Triple slot GPUs are supported with a maximum Graphics card length 12.5 in / 320mm.
  • SFX PSU, Mechanical design available for Kensington lock..
  • 【 User Friendly】 Full Removable Dust filter for easy maintenance. Released USB Type C, 2 x USB 3.0, microphone, 3.5mm audio jack on the top..
  • 【 Compact Size】 Small size with Powerful internal layout, support 1 x3.5”HDD and 4x 2.5 SSD, or 5x 2.5SSD, only 19.5L Volume (15.3 x 6.8 x 11.4 in / 390 x 173 x 290 mm)..
Check Stock

GLOTRENDS Dual M.2 PCIe 4.0/3.0 X8 Adapter, Support M.2 PCIe SSD (NVMe/AHCI Key M) RAID Setup under PCIe Bifurcation Enabled Motherboard, Support Intel VROC and AMD Ryzen Threadripper NVMe RAID (PA21)

  • Dual M.2 PCIe 4.0/3.0 SSD Adapter: add 2 x M.2 PCIe 4.0/3.0 SSD (NVMe/AHCI Key M) onto a single PCIe X8 add-on card, you can use 2 separate M.2 PCIe SSD at the same time. Support Intel VROC and AMD Ryzen Threadripper NVMe RAID under PCIe Bifurcation Enabled Motherboard..
  • ASM1182e solution allow 2 x M.2 PCIe 4.0/3.0 SSD obtain PCIE X8 bandwidth (8GB/s with PCIe 3.0 or 16GB/s with PCIe 4.0), but only under PCIe Bifurcation enabled motherboard. Note: To reach PCIe 4.0 speed, make sure your CPU and motherboard and PCIe SSD are all PCIe 4.0 enabled. Otherwise, it would not be PCIe 4.0 speed..
  • Compatible with PCIe 4.0/3.0/2.0 motherboards, and install on PCIe X8/X16 slot. Low-profile bracket and regular-profile bracket are included, so work with 2U high workstations or servers with Windows, Linux, and mac OS. No driver installation is required..
  • Applicable with 2230/2242/2260/2280/22110 size M.2 PCIe SSD (Key-M), such us Samsung: 980/ 970 PRO/ 970 EVO Plus/ 970 EVO.
  • Intel Optane SSD P1600X Series , Intel SSD 6 Series.
  • Western Digital: WD_BLACK SN750 SE, WD Blue SN550, WD Green SN350, etc. Note: not support M.2 SATA SSD (Key-B)..
  • Note: Your motherboard BIOS must support M.2 NVMe SSD, and support booting from PCIe in order to boot from M.2 NVMe SSD on this M.2 P....
Check Stock

NVMe M.2 Duplicator Dual-Bay Clone Enclosure, Tool-Free USB to NVME Adapter with Cooling Fan, 10Gbps Docking Station NVMe Enclosure Support Offline Cloning and Duplicator for M2 2230/2242/2260/2280

  • 【NVMe M.2 SSD Offline Cloner】- No need for any computer or laptop, our NVMe enclosure helps you clone the old SSD quickly. Only just take 10mins to clone 500G SSD from "Source SSD" to "Target SSD", saving your time to backup the SSD data.NOTES: Make Sure the capacity of The Target NVME M.2 SSD is larger than or equal to The Sources'.Please Back up the Data on the target disk before cloning to avoid losing important data..
  • 【10Gbps Extreme Speed】- This 2 in 1 M.2 duplicator is applicable to sizes 2230/2242 / 2260 / 2280 NVMe M.2 drivers. M.2 Enclosure Reader reaches up to 10 Gbps high speed for NVME M.2 through USB 3.2 Gen 2, a perfect solution for data transfer and data backup. One HD movie transfer only takes 2-5 seconds. (NVMe SSD is not included. Not support SATA SSD).
  • 【Excellent Heat Dissipation System】-M.2 Adapter adopts a classic black design, is durable, can quickly dissipate heat, and protects the hard disk when in use. The auto cooling fan can cool the SSD quickly, which starts running after the transfer files 10 seconds and cuts off after finishing the transfer 10 seconds..
Check Stock