ReviewsRemove Broken Screw Extractor

ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit – Drill Bits, Extractor Pins, Drilling Guides, Extractor Nuts Set

  • ...ion 25-Piece Remover Tool Kit to remove broken fasteners and studs from regular and even recessed bolts, nuts, and screws without breaking or jamming.
  • Take out any fastener with thread sizes from 3/16-inch to 9/16-inch (5mm to 16mm).
  • EASY TO USE: If broken bolt is either above or below the surface, use drill guides.
  • Extractors have flutes/ridges that will grip broken bolt when driven into newly drilled hole.
  • The drive nuts fit tightly over extractor to provide an easy and non-damaging way to turn extractor.
  • Clamp in a vise grip and twist broken bolt off extractor once removed.
  • BUILT TO LAST: For ultimate strength and highest torque without expansion, the drill bits constructed from #4241 high-speed steel (HSS) with polished finish, extractor pins constructed from #6150 chrome-vanadium (CR-V) steel with polished finish, drilling guides constructed from #45 steel with black oxide finish, extractor nuts constructed from alloy steel with sandblasted finish.
  • EASY STORAGE: Heavy-duty 8.6” x 1.6” x 5.6” inch (21.8cm x 4.1cm x 14.2cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • Storage case includes sizing labels for each compartment while drill bits and drilling guides include permanently l....
Check Stock

YUENTOEN Stripped Screw Extractor - 5pcs HSS Easy Out Broken Bolt Extractor Kit with Extension Screw Holder, Damaged Bolt Water Pipe Remover Set Power Drill Bit Tool for Screw or Bolt 1/8 to 3/4 inch

  • 【High Quality】These 5 piece broken screw remover set is made of high-speed steel with jagged irregular cuts, which can create more extraction possibilities for broken screws or bolts for extra durability and a good lifespan..
  • 【Meet Any Requirement】5 x Broken bolt extractor with magnetic extension screw holder, screw extractor size includes #1 for 1/8"-1/4", #2 for 1/4"-5/16", #3 for 5/16"-7/16", #4 for 7/16"-9/16", #5 for 9/16"-3/4"..
  • 【Clever Design】Reverse thread bits spiral design for extra gripping power. Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the screw extractor's grip increases..
  • 【Simple to Use】First attach drill bit(Dr) to the extension bit holder, then the drill should be moving the bit counter clockwise(and please use the slow speed), finally use the screw extractor(Ex) side to remove the screw-bolt..
  • 【Wide Application】Allows the bolt remover to work with rusted, cracked, damaged or stripped screws, studs, bolts, ....
Check Stock

Hanson 53205 Extractor 1/4 Multi Spline for Tap Die Extraction

  • Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
  • Screw extractors are ideal for high-torque applications.
  • Each IRWIN screw extractor has an aggressive left-hand spiral design for extra gripping power.
Check Stock

REBRA 31-Pieces Screw&Bolt Extractor Set and Left-Hand Drill Bit Kit, Multi-Spline Extractors, Easy Out Broken Lug Nut Remover Socket Tool for Stripped, Damaged, Rounded-Off, Rusted Bolts, Nuts&Screws

  • 【HIGH QUALITY】: Made from high-quality chrome molybdenum steel, our screw extractors are built to last. . Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, broken screws..
  • 【DIVERSIFIED LASERS SIZE】:Our extractor set includes 7 pieces, with 6 screw extractors ranging in size from 1#-5/64", 2#-7/64", 3#-5/32", 4#-1/4", 5#-17/64", 6#-13/32" and an additional spare size of 1#-5/64". With this set, you'll have the right tool for the job, no matter the size of the stripped or damaged screw or bolt you're working with..
  • 【Versatile Applications】: Our extractor set is designed to remove damaged or broken screws, bolts, and studs from a wide range of applications. Whether you're working on an automotive repair, home improvement project, or DIY woodworking project, our easy-out extractors are the perfect tool for the job..
  • 【User-Friendly】: Our screw extractor set is designed with the user in mind. The extractors are easy to use, Whether you're a professional mechanic or a DIY enthusiast, our bolt and screw....
Check Stock

Hanson 52207 Screw Ext Multi Spline 5/16 for Tap Die Extraction

  • Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
  • Screw extractors are ideal for high-torque applications.
  • Each IRWIN screw extractor has an aggressive left-hand spiral design for extra gripping power.
  • 5/16-inch recommended drill bit diameter.
  • 1/2" hex head and 9/16" bolt diameter.Item # 53225 shown.
Check Stock

Screw Extractor 5 Piece Set Black Nitrided 4341 High-Speed Steel Easily and Quickly Remove All Common Sizes of Damaged Broken or Stripped Screws

  • 5-PIECE SCREW EXTRACTOR SET - this kit includes a screw extractor bit to remove all common sizes of damaged, stripped or broken screws..
  • BLACK NITRIDE FINISH - helps your tools last longer than normal stainless steel and prevents rust and corrosion..
  • MODERN TOOL - typically called an easy out or “EZ out”, this black nitrided screw remover and extractor kit improves upon the traditional design....
  • EASY TO USE - set your drill to reverse/counterclockwise and use a slow drill speed. Begin the extraction by using the drill bit/burnishing tip and....
  • MUST-HAVE TOOL - whether you are a handyman, handywoman or contractor, screws sometime get damaged or broken. Keep this set in your toolbox to get the....
Check Stock

COMOWARE Screw Extractor & Left Hand Drill Bit Set- Broken Bolt Remover HSS M2, 10pcs with Metal Index Case

  • EASY OUT REMOVING: It is more convenient and easy to remove the broken screw from the damaged workpiece by using the left hand drill bit which coordinates with the screw extractor. Spiral groove on screw extractor can go deep into screw to increase grip force to remove studs, screws and bolts around the house, garage or on your job project..
  • HIGH QUALITY CARBIDE MATERIAL: The left hand drill is made of HSS M2. Compared with ordinary high speed steel, M2 material can prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials..
  • UNIQUE DESIGN: The 118°angle makes it easier to cut into the workpiece with small axial resistance. This design can not only increase the length of cutting edge work but also decrease the nominal thickness of cutting layer, which improves heat dissipation and durability with better cutting effect..
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a index case, convenient to use and carry..
  • SET INCLUDING: 5pcs alloy steel screw extractors and 5pcs HSS M2 left hand drill bits. Screw extractor in....
Check Stock

Metal Nut Splitter Cracker, Metal Nut Splitter Breaker Manual Pressure Nut Cracker Remover Extractor Tool, 9-12mm/12-16mm/16-22mm Nut Remover Extractor Tools

  • High Quality - These damaged screw extractor made of High-Speed Steel 4241 for maximum strength and high hardness which provide superior wear resistance and long life use..
  • 22 in 1 Kit - 10-Set Different Sizes #1-#10 damaged screw extractor with extension bit holder and socket adapter can meet your various needs..
  • Powerful - Striped screw extractor removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts..
  • Easy to Use - Just simple steps will get the job done. Use a suitable size screw remover to drill a hole with cutting size and it’s easy to extract the screw or bolt using extractor tool..
  • Must-Have Tool - Ideal for handyman, woodworker or fitment worker, provides an extractor bit to remove all common sizes of damaged, stripped or broken screws..
Check Stock

Damaged Screw Extractor Set for Broken Rusty Screw, Cool Gadgets Gifts for Men and Women, A HassleFree Broken Bolt Extractor and Screw Remover Set HSS M35 (70 HRC)

  • Extra Strong, Reliable and Durable M35 HSS High-Speed Steel – The stripped screw extractor is manufactured from High Speed Steel (HSS) M35 with a 70 HRC hardness(Far Better than 6542, 4341 Material), which effectively removes broken screws from any surface..
  • Solve Any Broken Screws – This Damaged Screw Extractor Set works with any drill on any screw or bolt.With our dynamic set of extractor drill bits, removing stripped, painted over, rusted or rounded screws & bolts has never been easier or more efficient !.
  • Easy to Use - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next use the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • Gifts for Men and Women, Holiday Gift Guide - This Damaged Screw Extractor makes an amazing gift for any occasion. A must-have stocking stuffer ....
Check Stock

UYECOVE 10 Pieces Screw Extractor Set, Bolt Extractor Set Cobalt Drill Bits Set for Removing Stripped Screws and Broken Bolts Easy Out Bolt Extractor Set

  • ★ Diverse Sizes - 10 pieces Extractor Screw Extractor Set. And left hand cobalt drill bit work on sizes - 19/64",1/4",3/16",5/32",1/8". Spiral screw extractors include 1#, 2#, 3#, 4#, 5#. Impact drive for all kinds of job applications..
  • ★ Precision Design - Precise chamfered edge design for each drill bit. Helps faster removing broken studs, bolts, socket screws, and fittings. Bolt remover that remove broken screws, whether working on wood or metal..
  • ★ Durability - Made of impact-resistant CR-MO steel (chromium-molybdenum steel) and HSS material, providing excellent durability and corrosion resistance, and not easily damaged..
  • ★ Easy to Pick and Carry - The entire screw extractor set is packed in a plastic box for easy storage. You can take it to any corner of the world, Whatever bolt extractor sets for car maintenance or daily use. It can provide you with great convenience..
  • ★ Warranty Service - Professional Quality, offer two-year warranty. We are so confident about our high-quality screw set that If you have any product issues during using our ....
Check Stock

Lisle 68500 Manifold Drill Template for Ford 2V & 3V

  • Interchangeable plates and alignment pins ensure drill is centered on the broken stud.
  • Depth gauge for drilling is marked on the template. Designed to remove broken exhaust manifold studs on 4.6L, 5.4L and 6.8L V10 2 valve and 3 valve Ford Triton engines without damaging the cylinder head..
  • The stripped screw extractor is then used to remove the broken stud.
Check Stock