ReviewsReplacement Spigot For Beverage Jars

hgzaccompany 2 Pack Stainless Steel Spigot For Drink Dispenser, Replacement Metal Spigot For Beverage Dispenser, Water Dispenser Faucet, Food Grade Metal Spout.

  • Widely Applicable: The replacement spigot is made of high-quality food grade stainless steel, lead-free,anti-corrosion, very durable and good for health. Widely used in self-service drinks and restaurants, suitable for wine, water, tea, juice, etc..
  • Mounting diameter: This beverage dispenser replacement spigot fits 16mm or 5/8 inch openings, and the wall thickness does not exceed 17mm or 11/16 inches..
  • Note: Please clean the faucet before installation. Do not tighten the nut with excessive force. After installation, pour clean water to test whether there is leakage. If there is a leakage, tighten the nut again..
  • Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
  • Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock

Stainless Steel Beer Beverage Dispenser Replacement Spigot Faucet Black Handle for Coffee Jar Juice Cold Hot Water Wine Beer Drink barrel Milk tea bucket by MUGLIO(16mm)

  • The Beverage Dispenser Replacement Spigot is made of fine solid stainless steel, no lead included in the material, surprisingly durable and corrosive-resistant, good for health and with a long life with proper appliance..
  • This Beverage Dispenser Replacement Spigot Has Quarter-Turn Ceramic Valve. It requires 5/8 inch or 16mm diameter opening to install. It fits dispenser wall up to 11/16 inch or 17mm thick..
  • Good choice: This stainless steel spigot is a good choice to replace the plastic spigot that comes with the beverage dispenser..
  • Notice - Wash and tear off the blue protective films on the washers before use. If necessary, use 3/4 inch wrench for the nut, do not over-tighten. Rinse thoroughly by clean water with handle in partial open position (45 degree turn) after the usage. If used for sugary drink, we suggest removing the spigot from the dispenser and clean thoroughly..
  • Good after-sales: we promise to make customers 100% satisfied. If you have any questions about the products, please contact us..
Check Stock

Glass Drink Dispenser for Parties - Set of 2-1 Gallon Glass Jar Beverage Dispensers with Stand Glass Water Dispenser Countertop for Weddings Sun Tea Jar Lemonade & Laundry Detergent Dispenser

  • Mason Jar Drink Dispenser - The Estilo set of 2 glass mason jar beverage dispensers comes with a decorative metal stand, embossed chalkboards and chalk included. The dispensers have a wide-mouth design with a tin screw off lid that makes it easy to clean, use and fill with your favorite beverage..
  • High-Quality and Strong Glass Beverage Dispenser - Our glass dispenser is made of thick high-quality, premium-grade glass with a non-drip, easy pull spigot. The liquid dispenser’s spigot is created to provide a steady stream of your favorite drink..
  • Great for Parties or Everyday Use - These drink dispensers make a great centerpiece for parties, holidays, barbecues, picnics, bachelor and bachelorette parties, weddings and more. It’s also a great liquid laundry detergent dispenser..
  • Great Size - Each liquid dispenser holds up to 1 gallon (3.78 liters), so that you can fill with your favorite beverages, iced tea, lemonade, and more. The glass beverage dispenser is not recommended for hot liquids..
  • What’s Included - 2 Glass Mason Jars Beverage Drink Dispensers 1 Gallon each, 2 Chalkboard Labels, 2 pieces of Chalk, Metal Stand, and Non-Drip Spigots. Dispenser dimensions.
  • 5 L x 5 W x 10 H inches. Hand wash only..
Check Stock

Insulated Beverage Dispenser, Drink Dispenser

  • 【MATERIAL】Our hot insulated beverage dispenser with spigot is made of high-quality double-layer stainless steel liner, safe and hygienic, combined with polyurethane foam material to make the heat preservation performance better. Reserved for the original flavor and nutrients of the beverage..
  • 【FUNCTION-KEEP HOT AND COLD BEVERAGES】 This beverage dispenser does not have a heating function but keeps hot and cold beverages for hours.Our drink dispenser with spigot is perfect for serving coffee, tea, hot cider, hot chocolate and more for banquets, church functions, corporate events and christmas party..
  • 【FOLDABLE LEGS DESIGN 】Our insulated beverage dispenser is especially designed as foldable legs ,which is convenient for you use flexibly. If you have any other questions about our hot and cold insulated beverage dispenser with spigot , please contact us and we will reply you as soon as possible..
  • 【CONVENIENT】The hot and cold drink dispenser with stainless steel outer and inner body, and the insulated beverage dispenser with spigot is convenient to carry. In addition, hot and cold beverage dispenser with heavy-duty handle enables it to be easily moved from one location to another..
  • 【LARGE CAPACITY & INTELLIGENT DESIGN】Our insulated bev....
Check Stock

Outdoor Glass Beverage Dispenser with Stainless Steel Spigot & Ice Cylinder - 1 Gallon Drink Dispenser for Tea, Lemonade, Cold Water & More

  • EASY TO USE – Fill and clean this 1-gallon glass beverage dispenser using the wide mouth opening. Not recommended for use with hot beverages, this dispenser is perfect for lemonade, tea, sangria, ice water, and more! Hand wash only..
  • ADD CHIC STYLE TO YOUR EVENT – Wedding, showers, dinner parties, birthdays, whatever your even might be this outdoor beverage dispenser will add a vintage charm to any setting that will definitely leave your guests talking..
  • STAINLESS STEEL SPIGOT – Each glass drink dispenser has a metal spigot that prevents rust, breakage and leaking. Our spigot is food grade 304 Stainless Steel, resistant to corrosion..
  • LIFETIME REPLACEMENT WARRANTY – Crutello stands behind all of its beverage dispensers 100%. This water dispenser comes with an automatic 1 year warranty. Register online for a free lifetime warranty..
  • MINI CHALKBOARD INCLUDED – Easily mark what is inside each drink dispenser to your guests with the included chalkboard and chalk.
Check Stock

iCakper Durable Beverage Dispenser Replacement Spigot,Stainless Steel Polished Finished Water Dispenser Replacement Faucet，fits Berkey and other Gravity Filter systems as well

  • Easy and Quick Installation: Please clean the faucet before use. ①Put the silicone pad into the faucet. ②Insert the faucet into the dispenser.....
  • Wide Uses: The beverage dispenser replacement spigot fits most dispenser, which is great for dispensing lemonade, sun tea, wine, juice or water at....
  • Durable and Corrosive-Resistant: Compared with the plastic faucet, the stainless steel polished faucet is not only stylish and beautiful, but also....
  • Quality Stainless Steel, Excellent Flow: The exquisite workmanship ensures its good fluidity, and you don't have to worry about splashing the beverage....
  • Your Satisfaction is Our Priority: All our beverage dispenser replacement spigot are made of quality stainless steel material, 100% satisfaction....
Check Stock

Lanzeuta 2 Sets BPA-Free Replacement Cooler Faucet, Black Water Dispenser Tap Set, Reusable Plastic Spigot Spout Water Beverage Lever Pour Dispenser Valve Water Crock Tap

  • What Will You Receive -- 2 x Black Water Dispenser Spigot, 4 x Washers, 2 x Lock Nuts, that enough to meet your daily use and replacement needs, and can be used multiple times..
  • Quality Selection -- The water dispenser tap set is made of food-grade polypropylene (PP) and silicone material for BPA free & non-toxic, durable & wear-resistant, which you can rest assured to use for a long time.
  • Effortless Operation -- Push up the handle of the tap, and the spout will remain open for hands-free distribution, which is effortless for people of all skill levels, suitable for seniors, kids, etc..
  • Widely Application -- Specially designed for gravity feeding, no dripping & no leakage. This spigot is great for glass jars, cold water beverage dispensers, filtered water dispensers, juice and ice tea brewers..
  • Purchase with Confidence --- Lanzeuta provide a full refund for any reason within 90 days after the date of purchase. If you have any questions, we offer 24hrs customer service. This is our confidence in product quality and commitment to customers. Please click "Add to Cart"!.
Check Stock

Lanzeuta 2 Sets BPA-Free Replacement Cooler Faucet, White Water Dispenser Tap Set, Reusable Plastic Spigot Spout Water Beverage Lever Pour Dispenser Valve Water Crock Tap

  • What Will You Receive -- 2 x White Water Dispenser Spigot, 4 x Washers, 2 x Lock Nuts, that enough to meet your daily use and replacement needs, and can be used multiple times..
  • Quality Selection -- The water dispenser tap set is made of food-grade polypropylene (PP) and silicone material for BPA free & non-toxic, durable & wear-resistant, which you can rest assured to use for a long time.
  • Effortless Operation -- Push up the handle of the tap, and the spout will remain open for hands-free distribution, which is effortless for people of all skill levels, suitable for seniors, kids, etc..
  • Widely Application -- Specially designed for gravity feeding, no dripping & no leakage. This spigot is great for glass jars, cold water beverage dispensers, filtered water dispensers, juice and ice tea brewers..
  • Purchase with Confidence --- Lanzeuta provide a full refund for any reason within 90 days after the date of purchase. If you have any questions, we offer 24hrs customer service. This is our confidence in product quality and commitment to customers. Please click "Add to Cart"!.
Check Stock

Replacement Water Cooler Faucet Dispenser Tap Set Valve Water Crock Tap for Bottle Jug Reusable Spigot Spout Water Beverage Lever Pour Dispenser

  • Package content:1pcs water faucets, 2pcs washers and 1pcs lock nuts, enough for your daily use and replacement..
  • Easy to use: push up and this spigot will stay open,On the contrary, close..
  • Size: diameter 18mm/0.71inch, high 70mm/2.76inch..
  • Reliable and safe: the water dispenser tap set is made of quality plastic and silicone material, safe and non-toxic, durable and wear-resistant..
  • Wide range of applications:glass jars, cold water beverage dispensers, filtered water dispensers, juice and ice tea brewers.
Check Stock

Outdoor Glass Beverage Dispenser with Sturdy Metal Base, Stainless Steel Spigot & Hanging Chalkboard - Drink Dispenser for Lemonade, Tea, Cold Water & More

  • ELEVATE YOUR EVENT - Ilyapa’s beautifully crafted Outdoor Beverage Dispenser features a thick glass jar with vintage styling and a sturdy metal base, sure to impress your guests. Ideal for any formal or casual occasion including dinner parties, weddings, birthdays, holidays, reunions, mitzvahs, and more!.
  • EASY TO FILL AND CLEAN - Our 1-gallon glass jar features a wide mouth opening, making it super easy to fill and clean. Designed for cold beverages only, this dispenser is perfect for lemonade, tea, limeade, orange juice, sangria, punch, ice water, and more! Hand wash only..
  • STURDY METAL BASE - Our glass beverage dispenser comes with a sturdy metal base that elevates your drink dispenser so you can easily fill your cup. Cheers!.
  • INCLUDES MINI CHALKBOARD, CHALK & STAINLESS STEEL SPIGOT - Includes a mini hanging chalkboard and chalk so you can label your drinks, plus a strong and durable metal spigot that prevents rust, breakage and leaking. Our spigot is 304 Stainless Steel, making it food grade and resistant to corrosion..
  • LIFETIME REPLACEMENT WARRANTY - Ilyapa stands behind all of its beverage dispensers 100%. This Glass Drinks Dispenser comes with an automatic 1 year warranty. Register online for a free lifetime warranty..
Check Stock

Sumerain Spigot for Beverage Dispenser,SUS304 Stainless Steel Metal Spigot Dispenser for Jar, Juice,Cold Drink,Wine,Beer

  • Spigot for Beverage Dispenser Using for Gravity Filter Systems of Cold Beverages, Water, Juices, and Kombucha Tea etc.
  • Premium Quality Material. Beverage dispenser spigot is made of the highest quality 304 Stainless Steel, It will not rust and no Lead included..
  • Exempts disassemble cleaning design for easy clean. Please tear off the blue protective film on the escutcheon surface before installation..
  • Quick Installation design for this stainless steel spigot, easy to install and use. Please refer to the video about how to install this beverage dispenser spigot..
  • Cartridge Tested with for more than 500,000 times to ensure a trouble-free operation of the drink dispenser spigot..
Check Stock