ReviewsResidential Tool Tray

iPhone Compatible Sim Card Tray Removal Tool (Pack of 10) | Sim Card Pin | Sim Card Tool Compatible with iPhone X, 8, 7, 6, iPads, Samsung Note 9, 8, S9, S8, S7 / Sony, Huawei, HTC & all smartphones

  • ✅ The sim pin makes a GOOD sim card eject tool REPLACeMENT. The sim card tray eject pin is a SUBSTITUTE for any LOST sim card EJECT TOOL. Sim tool GUARANTEES the EFFICIENT REMOVAL of the SIM from its tray. This sim opening tool OPENS and EJECTS the SIM card tray on your devices. This sim card ejector and sim card eject tool works for all Apple iPhone X, 8+, 8, 7, 7+, 6+, 6S, 6S+, 6, SE, sim eject tool iPhone 5, 5C, 5S, sim card eject tool iPhone 4S, 4, sim card eject tool for iPad/iPod series..
  • ✅ It is not easy to eject iPhone sim card without tool to use so, the sim extractor pin from Mobi Lock is the answer! The sim card eject pin for iPhone is EASY TO USE. To use this sim eject tool, just insert the straight end of the sim removal tool into the hole next to the SIM port and remove your SIM card from the tray. Furthermore, this Mobi Lock sim eject pin and sim card remover is known for its versatility because this pin also WORKS with OTHER SMARTPHONES of SIMILAR SIZE eject trays..
  • ✅ Mobi lock is dedicated in creating quality sim extractors. This sim card eject keys are well designed to ENSURE that this sim eject tool is NOT EASILY BENT or BROKEN. This iPhone sim card tray open eject pin is made using a fine metal alloy. Although these sim c....
Check Stock

ABN Flexible Tool Tray - Silicone Rubber Tools Organizer, Non Slip Tool Holder Tray for Organizing Parts, 10in x 9in

  • [Organize Your Tools]: Whether you are performing maintenance on your vehicle or crafting a DIY project, use the ABN Orange Rubber Tool Tray Flexible Non Slip Tool Tray to hold parts and tools for you.
  • Use this silicone tool tray for your workshop and garage.
  • [No More Slippage]: Save time and energy using this parts tray to prevent the dropping of your parts and tools.
  • Non-slip smooth backing of tool tray holder allows you to place holder on curved or slanted surfaces.
  • Ridges in center compartment keep tools in place.
  • [Sections for Your Tools]: Keep your tools and small parts on hand while you work on your vehicle or are woodworking.
  • Flexible nonslip tool holder has space to hold your wrenches, nails, sockets, screws, and more in the included 4 notches, 2 large pockets, 3 small pockets, 5 socket holes.
  • [Flexible Silicone Rubber]: No need to worry about this non slip flexible tool organizer falling apart after extended, repeated use.
  • Silicone parts tray allows for the easy cleanup of grime, dirt, and oil.
  • [Perfect Size]: Silicone tool tray measures 10 x 9 x 1 inches (26 x 22 x 2cm).
  • Set rubber work tray in your toolbox, your car's engine compartment, or even the wing of your plane.
  • Package includes 1 flexible non slip tool holder for your workshop.
Check Stock

ABN Flexible Tool Tray, 3pk - Silicone Rubber Tools Organizer, Non Slip Tool Holder Tray for Organizing Parts, 3 Sizes

  • [Organize Your Tools]: Whether you are performing maintenance on your vehicle or crafting a DIY project, use the ABN Orange Rubber Tool Tray Flexible Non Slip Tool Tray 3 Pack to hold parts and tools for you.
  • Use each silicone tool tray for your workshop and garage.
  • [No More Slippage]: Save time and energy using these parts tray containers to prevent the dropping of your parts and tools.
  • Non-slip smooth backing of tool tray holder allows you to place holder on curved or slanted surfaces.
  • [Sections for Your Tools]: Keep your tools and small parts on hand while you work on your vehicle or are woodworking.
  • Each flexible nonslip tool holder has space to hold your wrenches, nails, sockets, screws, and more in the included variety of pockets, notches, holes, and ridges for your tools and parts.
  • [Flexible Silicone Rubber]: No need to worry about these non slip flexible tool organizer caddies falling apart after extended, repeated use.
  • Silicone parts tray allows for the easy cleanup of grime, dirt, and oil.
  • [Perfect Size]: Set rubber work tray in your toolbox, your car's engine compartment, or even the wing of your plane.
  • Package includes 3 flexible non slip tool mats.
  • Mats included measure 10.5 x 5.5, 10 x 9, and 21 x 14 inches (26 x 13, 25 x 22, 53 x 35cm).
Check Stock

Tool Sorter Pliers Organizer – Black

  • ROLLING TRAY: Our rolling trays keep your tools handy wherever you're working.
  • These tray tables are ideal tools for mechanics.
  • ADJUSTABLE HEIGHT: Portable tool tray is adjustable from 33.5 inches to 49.2 inches.
  • Features an EVA foam work surface (29 inches x 20 inches) with three built in small parts / tool organizers.
  • DURABLE FINISH: Portable work table features rubber bumper corners to prevent scratching to vehicles as the mechanics table is moved around your workspace, and a durable powder coated finish for additional longevity.
  • ALL STEEL CONSTRUCTION: Tool tray cart features an all steel construction that will help it stand up to challenging shop environments.
  • Durability, organization, portability, everything you could want in a mechanic's work table.
  • BUILT TO LAST: With an all-steel body, four rugged casters, a powder-coat finish, EVA foam work space, and high-quality welds, this mechanic tool tray is built to last.
Check Stock

DURA-LIFT Heavy Duty Extension Garage Door Spring 2-Pack (120 lb.)

  • ★Application: The pair of torsion spring winding rods are specifically designed for increasing (winding) and decreasing (unwinding) the tension on residential garage door torsion springs.
  • ★Must have tool: Torsion Spring Winding Rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door. Failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage.
  • ★Dimensions: Garage door torsion spring winding rod are 0.47inch in outside diameter and 17.7” long. They are designed to industry standard for residential garage door use, fit most residential winding cones.
  • ★Safety first: Steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control. When adjusting or replacing garage door torsion springs, it is extremely important that these tasks are not attempted with any tools other than these rods.
  • ★If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours.
Check Stock

SharkBite 24947 Plumbing Straight Stop, Metal 1/2' x 1/2'

  • PEX CLAMP TOOL: Time and cost savings in combination with SharkBite PEX Stainless Steel 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch Stainless Steel Clamp Rings.
  • FAST: No waiting for glue to dry or joints to cool.
  • USE: Works in conjunction with PEX Stainless Steel Clamp Rings, PEX Barb Fittings and PEX Pipe Tubing.
  • ASSURANCE: PEX Clamp Tool will not release until a secure connection is made removing the need to check each fitting with a go/no go gauge.
  • RESIDENTIAL and COMMERCIAL: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

Metaltech CISTR Jobsite Series 6' Baker Tool Tray

  • UNCLUTTER YOUR TOOLBOX DRAWER – The Compact Tool Sorter Pliers Organizer holds up to 11 pliers. It helps unclutter your toolbox and create more room for even more tools.
  • ORGANIZE YOUR TOOLS – Tool Sorter Pliers Tray organizes your tool chest. Tools are easily visible and your tool box drawer will look clean and organized.
  • RECLAIM SPACE – The compact Tool Sorter Pliers Tray saves tons of space, creating more room for even more tools. Tray measures 13 x 10 x 1.25 inches.
  • STORE A VARIETY OF TOOLS – Tool Caddy holds a variety of tools, including adjustable wrenches, metal files, chisels, etc. Graduated compartments and open end give flexibility for tools of varying dimensions.
  • MADE IN THE USA – All Tool Sorter Organizers are tough built right here in the USA.
Check Stock

Tool Sorter Screwdriver Organizer – Black

  • ✅ SCREWDRIVERS ORGANIZED – This screwdriver tray organizes your screwdrivers in a logical way. Quickly and easily find the right tool. No more rifling through your tool drawer looking for the right tool.
  • ✅ CLEARLY SEE EACH SCREWDRIVER – This screwdriver organizer gives you easy identification without confusion over type and size. Each tool has its spot and you will see clearly if a tool is missing.
  • ✅ UNCLUTTER YOUR TOOLBOX DRAWER – The Compact Tool Sorter screwdriver tray holds up to 16 screwdrivers. It helps unclutter your toolbox and create more room for even more tools.
  • ✅ FITS MOST TOOLBOX DRAWERS – Low profile tray fits even shallow drawers giving you greater flexibility. Measures 13" x 10" x 1".
  • ✅ BUILT TOUGH IN USA – All Tool Sorter products are made of the highest quality materials and crafted right here in the USA. They will stand up to your projects.
Check Stock

Garden Star 70005 Large Steel Tray Rover Wheelbarrow Green/Black

  • The large steel tray Rover features two, pneumatic 4.80/4.00-8 tires, making it easy to lift, balance and maneuver..
  • The loop handle and center of gravity allow users to push, pull or dump all types of loads with little effort..
  • It features a 6-cubic foot Steel tray and 400-pound load capacity, perfect for heavy duty residential or job site use.
Check Stock

OEMTOOLS 22383 4 Piece Black Aluminum Socket Tray Set, Trays for 1/4”, 3/8”, and 1/2” Drive Size Sockets, SAE Socket Tray, Socket Organizers for Toolboxes

  • MODULAR DESIGN: Organize your sockets however you want in trays and rearrange whenever needed.
  • Quickly identify the right tool every time with this tool socket organizer.
  • Additional 1/2 inch socket organizer tray to accommodate any socket collection.
  • FORM WITH FUNCTION: Rubber feet protect your workspace from scratches.
  • Non-magnetic OEMTOOLS socket tray designed to prevent metal dust buildup.
  • Anodized black finish creates a sleek toolbox appearance.
  • NEVER MISS A BEAT: Adjustable socket organization studs slide easily from either direction.
  • The socket tray SAE system guarantees your sockets stay secure while allowing for one-handed removal.
  • Our socket set organizer is designed to meet your needs.
  • INTUITIVELY CRAFTED: The billet aluminum sockets organizer construction is lightweight and long lasting.
  • Subtle socket set tray organizer design means they fit easily in any storage drawer.
  • TRAY DETAILS: 1/4” socket organizer tray set measures 9” x 3”.
  • (2) 1/2” socket holders organizers for tool box measure 12” x 3”.
  • The socket organizer for tool box drawer has adjustable studs.
Check Stock

Magnet Flexible Reuseable

  • Tool tray is made of high-quality silica gel, beautiful in appearance and anti-static.. Including three specifications, Small: 10.8” x 5.7”.
  • Non-slip flexible tool tray can effectively organize your tools. Fasteners, hammers, wrenches, sockets, drill bits, nuts, bolts and other tools that....
  • The high heat resistance and flexibility of the non-slip flexible tool tray can make it suitable for various working environments, whether it is....
  • Non-slip flexible tool trays have good heat resistance, they are non-magnetic, and will not attract metal chips. They are resistant to oil and....
  • Easy to clean, a small amount of soap and water will make it new again. If you encounter more troublesome situations, you can even use a brake....
Check Stock