ReviewsResistance Machines

CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool

...an cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter..
[HIGH-QUALITY CNC ROUTER BIT] The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
[WIDE RANGE OF APPLICATIONS] This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand)..
[APPLICABLE EQUIPMENT] Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
[APPLICABLE EQUIPMENT] Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as w....

Check Stock

uxcell Thread Milling Taps 7/16-14 UNC High Speed Steel HSS 4 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..

Check Stock

uxcell Thread Milling Taps 3/8-24 UNS High Speed Steel HSS 3 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..

Check Stock

uxcell Thread Milling Taps 1/2-13 UNC High Speed Steel HSS 4 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long

accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..

Check Stock

4EverShape Resistance Bands Handles, Upgraded Grip Wide Design with Solid ABS Cores, Durable Big Carabiners for Cable Machines and Exercise Bands Workout

⚜ 【SUPER STRONG, HEAVY DUTY CONSTRUCTION】4EverShape Gym Resistance Bands Grip Handles are manufactured to be super strong and ultra durable. They are designed to take the most punishing resistance bands and even cable machine workouts..
⚜ 【PREMIUM MATERIALS】Every material aspect of these handles is premium quality. These Top Rated handles feature super strong ABS plastic grips,big size galvanized steel carabiner,thicker and wider woven nylon webbing with heavy duty stitching..
⚜ 【EXTRA WIDE COMFORT DESIGN】4EverShape Gym exercise bands handles and are designed to be wider and more comfortable than normal handles. Perfect for use as Bowflex Handles, Resistance Exercise Bands Handles, or Gym Handles..
⚜ 【VERSATILE EXERCISE MACHINE ATTACHMENT】Can be used with resistance bands, Bowflex home gyms, cable machines, pilates reformers, functional training equipment, chair gym, cable crossover machine, and smith machines.
⚜ 【100% MONEY BACK GUARANTEE】 We're SO confident that you'll love the 4Evershape Handles that we offer a 100% Money Back Guarantee. Try this 4Evershape product RISK FREE. If it is not everything that we claim send it back within 30 days for a full refund..

Check Stock

Cuff Tummy Trainer Femme Exceptional Shapewear , Women Waist Trainer Tummy Control , 100% Invisible Quickly Lift The Hips and Tighten The Waist , with Butt Lifter. (M)

UNLIKE EVERYTHING ELSE: Other machines only work the fronts and backs of your lower body which means you must crank up the resistance to feel the impact. Scoop is different: our tension knobs controls your tempo, but because you are using all of the muscles of your lower body at once, dont need high resistance. This means the workout feels easier but can strengthen muscles than bikes, treadmills or other mini pedalers completely ignore..
LOWER YOUR FALL RISK: The Scoop tones the entire lower body 360 and even works your core muscles. Unlike walking or biking, strengthening your lateral muscles can quickly improve your balance, reducing fall and injury risk. It's perfect for those who want to stay fit and active as they age..
BUILD STRONGER KNEES & HIPS: Scoop is zero impact and clinically shown to improve knee health by....

Check Stock

CONATE High-end Wood Water Rowing Machine for Home Use 300 Pound Load-Bearing Foldable Wood Water Rowing Machine Home Gym Rowing Machine with LCD Digital Monitor Rower Gift

... comfortable and safe fitness environment..
SAFETY & STABLIZE: Cardio machine rower keep the fine leveling device matched with the floor, Lower from the ground, more stable and safer. The seat cushion is supported by double cross bars, which is more stable and safe. Comfortable design enhances user experience..
WATER RESISTANCE PERFORMANCE: Rowing machines for home use comes with 6 levels water resistance system and advanced multi-bladed impeller provides enhanced resistance with a realistic rowing feel. The faster the fan blades rotate, the greater the resistance generated..
MATCH FOR YOUR FITNESS GOALS: The Conate rowing machine is equipped with an LCD display to display time, distance, frequency, etc. Designed to accurately track all essential workout metrics and stay focused while waterrower..
HUMANIZED DESIGN: Adjustable non-slip pedals, it can fit different sizes of feet sizes. The design of the molded upholstered seat makes water rower comfortable and practical..
SAVE SPACE & EASY TO MOVE: Rowing machines for home use foldable. After you have used it, you can store the rowing machine upright. Equipped with high-density non-marking rubber double casters, you can easily move the Conate rowing machine to any position you want..

Check Stock

uxcell Thread Milling Threading Tap M18 x 1.5 Metric Left Hand Machine HSS High Speed Steel 4 Straight Flutes Screw Tap H2 Tapping Machinist Thread Repair Tool

Tap Size: M18 x 1.5 metric thread, H2 thread tolerance grade, left hand (reverse) thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
High Speed Steel Tap: The metric tap is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc. Recommended feed rate: general steel: 6-15m/min.
Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..

Check Stock

5M GT2 Timing Belt, Upgrade Non-Slip Version, Width 6mm, Fit for 3D Printer and Most Belt Driven Printers

【Material】- The timing belt is made of high-quality rubber material, durable and flexible.
Specially designed for linear motion, high positioning accuracy, excellent workmanship, and strong wear resistance.
【Advantage】- The timing belt adopts rubber tooth surface, which is not easy to slip, can absorb vibration, has a smooth transmission and low noise, which makes the operation more quiet, so it can provide a stable speed.
【Application】- Timing belts are widely used in 3D printers, engraving machines, drilling machines, CNC machine tools, lathes, gear hobbing machines, gear forming machines, vacuum cleaners, electric skateboards, robots, lasers, motorcycles, chemical fiber, paper making, printing, chemical machinery and other equipment.
【Package Content】- 1pcs x 5M300 Arc Toothed Timing Belt.

Check Stock

QWORK 4080U Z-axis Screw Slide Table Linear Actuator Kit, 7-7/8" High Precision Linear Module for Engraving Machines, Laser Printers, 3D Printer and DIY CNC Router Parts X Y Z Axis, 200mm Black

Excellent performance: The linear screw adopts all-metal structure, fine workmanship, stable performance, high working efficiency, safe to use, corrosion-resistant..
High precision: Heavy load resistance, high precision, low friction coefficient and strong versatility..
Low resistance: The rotary motion is transformed into a linear motion, small frictional resistance..
Widely used: Used in cutting machines, DIY CNC engraving machines, laser printers, small CNC machine tools and other equipment..
Lead: 0.31 inch ( 8mm ), the lead screw moves 0.31 inch in one turn. Overall length: 9.8 inch, Length of aluminum section: 7.8 inch, T-type screw length : 9.45 inch..

Check Stock

HARFINGTON Tap & Bit Sets 1/4-32 UNEF 2B Straight Flute Machine Thread Milling Tap 5.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

Tap & Bit Sets: Tap size: thread size: 1/4-32 UNEF.
total length: 68mm / 2.68". Drill bit size: cutting edge diameter: 5.5mm / 0.217".
Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..

Check Stock