ReviewsResistance Pcb

ZugGear V2 PCB Mount Screw-in Stabilizers Translucent Smokey Gold Plated 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Stabilizers (DUROCK V2 Smokey 60/87 Kit)

DUROCK V2 PCB Mount Stabilizers are with NEW Non-Stripping Wire Design, fits for MX-compatible PCBs..
The V2 Outer Casing wire holding clasp made to prevent stripping of the wires, different from regular Cherry PCB mount stabilizers and others..
Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set. ( Washers, 6.25u and 7u Wire included ).

Check Stock

ZugGear V1 Translucent Smokey Gold Plated PCB Screw-in Stabilizers 2u 6.25u 7u Keycap Stabilizers Mechanical Keyboard Screw Stabilizers DUROCK V1 Smokey 60/87 Keyboard Set

1. DUROCK PCB Mount Stabilizers are designed for MX-compatible PCBs..
2. Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
3. The outer casing and parts, specifically made to prevent stripping of the threads, different from regular Cherry PCB mount stabilizers..
4. Polymer Nylon outer Casing-- Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
5. Pre-clipped Insert method, no need to clip the feet. Fit for 60 Keyboard Set,87 Keyboard Set and 104 Keyboard Set. ( Both 6.25u and 7u Wire....

Check Stock

CoolerMaster MASTERACCESSORY Riser Cable PCIe 4.0 x16 - 300mm, PCIe 4.0 Compatible, EMI Shielded 30 AWG, Protective ABS Casing for Graphics Card

PCIe 4.0 Compatible: While providing twice the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backwards compatible with a maximum transfer rate of over 64Gb/s (bi-directional) and fully supports the 16GT/s bit rate of PCIe 4.0 devices..
Ultra Durable PCB: The multi-layer coated PCB provides best-in-class performance under high thermal loads, cable flex, and moisture resistance..
Heavy Duty Shielding: EMI shielded 30 AWG tinned copper wires ensure minimal signal delay and electromagnetic interference-free operation..
Gold-Plated Pin Connections: Gold-plated PCI pins allow maximum durability with a rated 400g of retention force per contact pair..
Protective ABS Casing: UV resistant ABS casing protects cable connection points from rough handling..

Check Stock

Homyl Transparent Gold Plated PCB Screw-in Stabilizers 2U 6.25U Keycap Stabilizers for MX Mechanical Keyboard Cherry 1 Set Replacement - Pink 1 6.25u 7 2U

* Pre-clipped Insert method, no need to clip the feet. Fit for 104/108 Keyboard Set. ( 1pc 6.25u 7pcs 2U Wire included ) / Fit for 61 Keyboard Set and 87 Keyboard Set. ( 1pc 6.25u and 4pcs 2U ).
* PCB Screw-in Mount Stabilizers are designed for MX-compatible PCBs..
* Polymer Nylon outer Casing :Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
* The outer casing and parts, specifically made to prevent stripping of the threads, different from regular Cherry PCB mount stabilizers..
* Transparent housings and the Golden Wires set gives your board a clear and golden edge..

Check Stock

DaFuRui Screw Terminal，60Pack 5MM Pitch 2 Pin and 3 Pin PCB Connector Mount Breadboard Screw Terminal Block Connector for Arduino (2 Pin-50PCS, 3 Pin-10PCS)

★【Excellent Quality】100% brand new and high 2 Pin and 3 Pin PCB Mount Screw Terminal Block Connector.
★【Powerful function】The terminals can be spliced. There are various combinations.Two Size of 2 pin and 3 pin for you to choose.
★【Standard sizes】Rated Value : AC 300V, 16A, Pitch : 5mm/0.2"，For wire size: 14-22AWG，Contact resistance: 20mΩ.
★【Good Material】ABS Plastic, Electric Parts，Color:Blue，Reeds are phosphor bronze nickel-plated, stainless steel screws are M2.5.
★【Package Content 】60Pack 5MM Pitch 2 Pin and 3 Pin PCB Connector，2 Pin-50PCS, 3 Pin-10PCS Terminal Block Connector.

Check Stock

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.

Check Stock

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.

Check Stock

Natural Gas Tankless Hot Water Heater, Camplux 5.28 GPM On Demand Natural Gas Water Heater Outdoor, Gray

...ent adjustment, environmental protection and durability, truly outstanding energy saving. Man-machine dialogue, heating without waiting. This residential constant model saves time, money and energy while producing safe, endless hot water for whole home at an affordable rate..
High Thermal Efficiency & High-Rise Wind Resistance-Phosphorus deoxidized copper heat exchanger with high temperature and corrosion resistance technology for full combustion and high thermal efficiency up to 92% . It can resist grade 8 wind speed and 240Pa high anti-wind pressure. Additionally, a wind pressure sensor is added to perceive the external wind force in real time and automatically adjust the fan, flame and maintain stable combustion..
Considerate Customer Service -Here at Camplux, customer service is everything! We offer 24 shift hours customer service make the customer experience easy and fast through our live chat, phone support & our online helpdesk. Have a question? Give us a call at (844) 538-7475..

Check Stock

12mm X 33m 108ft Heat Tape Heat Resistant Tape Heat Transfer Tape Thermal Tape High Temp Tape High Temperature Tape Heat Tape for Sublimation for Heat Press No Residue 1Roll

Color: mainly tawny. Material: durable polyimide and silicone..
Length: about 30m /100ft. Heat resistance: about 280°C.003cbr003e.
High insulation, high temperature resistance, acid and alkali-resistance, low electrolysis, mechanically sound, crocking resistance, tear-resistance, without rest on surface when tear.
Ideal for protecting sensitive printed circuit board (PCB) components such as gold leads and gold fingers during the process of wave soldering..
Also extensive use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry..

Check Stock

3M ScotchWeld DP270 Clear 60-Minute Electric&Thermal Resistant Epoxy Plunger Kit (50ml w/Hand Plunger)

Kit includes 1 Cartridge, 1 Small Hand Plunger, and two mixing options (1 Reusable Mixing Sheet and 1 Mixing Nozzle). Perfect for one-time light-duty jobs.
Low Viscosity, perfect for potting/sealing electronic components and PCB’s.
Non-corrosive to metals, Excellent shock resistance, and humitidty resistance.
This is a Regulated Dangerouse Goods Item, Air/Expedited Shipments include DG Shipment Fee.

Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
Replacement microswitch PCB for Sanwa JLF series Joysticks.
Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
Package include One pcs Original Sanwa TP-MA PCB with Microswitch.

Check Stock