ReviewsResistant To Low Temperatures Pulleys

CHIFAN Waterproof Food Grade Silicone Lubricant Grease for O Rings Ring Faucet Plumbers 10g New

Silicone lubricant provides a protective, waterproof and low-friction coating to multiple surfaces.
Our quick-drying formula cures into a clear, stain-resistant hard film that protects your surfaces from the elements.
Safe to use on metal, rubber, vinyl, and plastic without a messy residue. 50-state VOC Compliant.
Protects a range of products found in the shop, garage, job site, or home including cables, pulleys, valves, hinges, windows, sliding doors and locks.
WD-40 Brand believes in creating high-quality products that will not fail in extreme conditions. Professionals rely on WD-40 Specialist to get the job....

Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
Steel or thermoplastic construction provides high durability for extended life.
Industry's best light-duty coverage and consistently first to market for late model application coverage.
Vibration damping system extends life of tensioner and other accessory components.

Check Stock

Boosted Board 25% Higher Acceleration Pulley Kit (Kegel (Stock Boosted) Pattern)

HAVE BIGGER WHEELS? WANT MORE ACCELERATION? 25% higher acceleration gear ratio*** - Comes with 2 Custom Belts. Our pulleys change the motor gear ratio by increasing the motor pulley size. Bigger pulley = more acceleration..
MATERIAL: Made from impact-resistant ABS, 3D printed, with impregnated metal for higher longevity and durability.
WARRANTY: 3 months or 200 mile warranty, which over comes first.
BOARD COMPATIBILITY: All Boosted Boards - V2, V3, Mini, Mini-X, Stealth. Our pulleys are larger and so the stock belt covers no longer fit in order to fit the larger pulley.
WHEEL COMPATIBILITY: Any Boosted Branded Wheel (105s, stock, etc.), Orangutang Caguama, Torque Board... any wheel with 10 pin holes for the pulley.

Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
Includes 4 different sets of interchangeable step pins.
Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.

Check Stock

ACDelco Gold 6K960 Standard V-Ribbed Serpentine Belt

...s Duralast 231098, Gates 38043, ACDelco 38043, CARQUEST 38043, NAPA 38043, Dorman 419-610, Four Seasons 45019, Freshstart 49025, Goodyear.
REDUCE VIBRATIONS: If you are looking for a quality replacement for your worn serpentine or V-belt idler and tensioner pulleys, turn to Dayco. Constructed from spun steel or wear-resistant plastic with specially formulated glass-filled polymers, these pulleys feature smoother surfaces and tighter dimensional tolerances to reduce vibration and therefore prolong belt life. Lubricated bearings and high temperature seals assure peak performance, the most critical element of a pulleys service life.
EXTEND SERVICE LIFE: Developed and designed using state-of-the-art three dimensional computer aided design (CAD) and finite element analysis (FEA) to ensure the optimal design and maximum structural integrity. Built to last, the Idler Pulley has superior resistance to dirt, salt, chemicals, and other under-the-hood contaminants.
RELY ON QUALITY AUTO PARTS: Dayco's essential engine parts and drive system solutions offer engine economy, efficiency, and exceptional performance while minimizing noise, vibration, and harshness. They strive to be first-to-market with built-to-last products such as high-quality engine timing belts, se....

Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.

Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.

Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

[Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
[ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
[Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
[Package Include] 1 Set Shaft Sleeve Adapter Kit.

Check Stock

Meartchy Hollow Teether Tubes for Babies, 5 Pack Teething Tubes Toys for Baby Infants, Silicone Chew Straw Toy for Babies 0-24 Months

【SAFE MATERIAL】Our baby teether is made of food-grade silicone, which is resistant to high and low temperatures. Teething tubes are FDA tested, safe, non-toxic, and BPA free..
【INNOVATIVE DESIGN】 The protruding texture design can massage the baby's mouth well. The innovative design can promote the coordination of the baby's eyes and hands by sucking and chewing the teether tube, thereby promoting the development of intelligence..
【EASY TO USE】We offer teether tubes in 5 different colors for easy replacement and daily use. And our teething tube is designed to be very lightweight, making it easy for your baby to hold and chew..
【EASY TO CLEAN】Our teether tubes are hollow, and we've included a cleaning brush for easy cleaning. The teething tube is resistant to high temperatures and low temperatures, so it can also be washed in the dishwasher..
【100% RISK FREE】If you are not satisfied with the product, we will give you a full refund. We always strictly control the quality of our products, if you have any questions, please feel free to contact us, we will solve the problem ASAP..

Check Stock

CRC Food Grade Silicone 03040 - 10 Wt. Oz., Multi-Purpose Silicone Lubricant for High Temperature Applications

This 2-pack includes a original formula lubricant and protective silicone lubricant. The pack includes 1 can of each of the following: WD-40 Multi-Use Product with Smart Straw Sprays 2 Ways, 12oz and WD-40 Specialist Silicone Lubricant with SMART STRAW SPRAYS 2 WAYS, 11 OZ.
WD-40 Multi-Use Product: FREES AND LOOSENS STICKY PARTS: Frees sticky mechanisms, loosens rust-to-metal bonds and helps release stuck, frozen or rusted metal parts.
WD-40 Specialist SIlicone: WATER RESISTANT, PROTECTIVE COATING: Silicone lubricant provides a protective, water resistant and low-friction coating to multiple surfaces. Protects a range of products found in the shop, garage, job site, or home including cables, pulleys, valves, hinges, windows, sliding doors and locks.
WD-40 Brand believes in creating high-quality products that will not fail in extreme conditions. Professionals rely on WD-40 Specialist to get the job done right.
Both products are equipped with an attached Smart Straw nozzle that Sprays 2 Ways to offer more control. Spray or stream and never lose the straw again.

Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

[Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
[ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
[Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
[Package Include] 1 Set Shaft Sleeve Adapter Kit.

Check Stock