ReviewsResmed Airsense 12v Adapters

VHBW CPAP Power Cord for Resmed Airsense 10 Power Supply, Fits for ResMed Airsense 10 S10 AirCurve 10 Series CPAP and BiPAP Machine, DC 12-24V Car Charger 24V 3.75A 90W Resmed Airsense 10 DC Adapter

  • The 24Volt power supply cable is great for plugging in your portable power station and charging your airsense 10. Please do not use it with a 12 volt power box..
  • These dc adapters for resmed airsense 10(DC plug size: 5.5x2.1mm) with 1 interchangeable connectors(DC 5.5 x 2.5mm). It is compatible with most 24V power station like Rockpals 300w/Talentcell PB120B1/ Aimtom300w/ Progeny 300w/EnginStar 350w etc..
  • This 24 V DC power cord is 3.3ft. You can use it for your Resmed Airsense 10 when camping or during power outages..
  • This DC charger cable was bent to test longer service life. ​Anti-interference magnetic ring can keep your device stable and running..
  • The airsense 10 dc converter replacement are only used for S10 (part number:37207). Please don’t use it with system one 60 series or Dreamstation series..
Check Stock

VHBW Replacement Resmed Airsense 10 Power Supply Compatible with Resmed Airsense 10 S10 AirCurve 10 Series CPAP and BiPAP Machine, 24V 3.75A 90W 370001 Resmed CPAP Power Cord

  • World Wide Input Voltage 100-240VAC 50/60Hz OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection).
  • 24V 3.75A 90W AC / DC Adapter Fit for ResMed Airsense 10 Air sense S10 AirCurve 10 Series CPAP and BiPAP Machines 24VDC 90 Watt OEM Original Power Supply Cord Cable PS Battery Charger Mains PSU.
  • Fits: Compatible with ResMed Airsense 10 Series: Compatible with AirSense 10, Compatible with AirSense 10 Elite,Compatible with AirSense 10 AutoSet, Compatible with AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
  • Fits for Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
  • Compatible with ResMed AirCurve 10 Series CPAP and BiPAP machine: Compatible with AirCurve 10 S BiLevel Machine,Compatible with AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
  • Service: 30 Days Money Back Guarantee and one year warranty. Please contact us with any questions or concerns.We are here to help.
Check Stock

ResMed AirMini DC Converter 38839

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
  • Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
  • ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
Check Stock

New Pilot-24 Lite CPAP Battery/Backup Power Supply for ResMed AirMini and AirSense 10 Pap Devices

  • ...cing the new Medistrom Pilot-24 Lite! A revolutionary small Uninterruptible Power Supply (Backup Battery) for various 24V PAP devices. Ensures that your devices seamlessly continue to receive power even during a power outage..
  • Compatible with most CPAP, APAP, and some BiPAP devices on the following platforms: ResMed AirSense 10, ResMed AirMini, *ResMed S9, *3B Medical Luna, *DreamStation Go Travel PAP and *Apex Medical iCH. NOT COMPATIBLE WITH VENTILATOR PAP DEVICES. (*cable kits sold separately).
  • Features a built-in LED Flashlight and USB Port for charging portable devices such as smart phones, tablets, MP3 players, cameras etc..
  • Can be used as a portable, standalone power source. Take it travelling and use it to power your compatible PAP device when the mains power isn’t available. Provides 1-2 nights of continuous run-time on an average CPAP pressure, average breathing rate, optimal mask seal and with the humidifier, heated tubing and exhalation pressure relief all disabled. Will provide approximately 19,000mAh for your handheld electronic devices..
  • Package includes: Pilot-24 Lite, Output Cable for ResMed AirSense 10, Output Cable for ResMed AirMini, AC Adapter Cable for ResMed AirMini, Fabric Carry Case, Product Manual and Quick Start Guide. DOES N....
Check Stock

Medistrom Pilot-24 Lite CPAP Battery for ResMed AirMini and Airsense 10 and 50W Solar Panel Kit

  • Package includes: Pilot-24 Lite CPAP Battery for ResMed AirMini and Airsense 10, Medistrom 50W Solar Panel, Charging Cable for Medistrom Pilot Lite, Output Cable for ResMed AirSense 10, Output Cable for ResMed AirMini, AC Adapter Cable for ResMed AirMini, Fabric Carry Case, Product Manual and Quick Start Guide..
  • Introducing the new Medistrom Pilot-24 Lite along with the Medistrom 50W Solar Panel! Get ready for the summer with this combo package! A revolutionary small Uninterruptible Power Supply (Backup Battery) for various 24V PAP devices. Ensures that your devices seamlessly continue to receive power even during a power outage..
  • Compatible with most CPAP, APAP, and some BiPAP devices on the following platforms: ResMed AirSense 10, ResMed AirMini, *ResMed S9, *3B Medical Luna, *Philips Respironics DreamStation Go Travel PAP and *Apex Medical iCH. NOT COMPATIBLE WITH VENTILATOR PAP DEVICES. (*cable kits sold separately).
  • Can be used as a portable, standalone power source. Take it travelling and use it to power your compatible PAP device when the mains power isn't available. Provides 1-2 nights of continuous run-time on an average CPAP pressure, average breathing rate, optimal mask seal and with the humidifier, heated tubing and exhalation pressure relie....
Check Stock

CPAPExtras.com Ultra Portable 1-2 Night CPAP Battery for use with Resmed Airsense 10 CPAP

  • Designed specifically for use with your CPAP device. Do not damage your CPAP and potentially void your warranty by using a battery that was not designed for use with a CPAP machine..
  • The GP12 battery is compatible with the following CPAP devices, Resmed Airsense 10, Resmed Airsense 11, Resmed Airmini, Philips Dreamstation, and Philips Dreamstation 2..
  • Package contents: GP12 battery, DC wall charger, type C cables (2), Airsense 10 DC cable.
  • Capacity 88.8 WH/ 24 AH @ 3.7 V/24000mAH – DC input: 12-24V/2A (max).
  • Designed to last 1-2 nights with the humidifier shut off..
  • Size 4.8 inches x 4.8 inches x 1.1 inches (1.1 lbs).
  • Ideal for air travel, camping, backpacking, and backup power..
  • Returns on open product is subject to a 50% restocking fee..
Check Stock

90W AC DC Adapter Charger Replacement for Resmed S10 Series, Fit for ResMed Airsense 10 Air Sense S10 AirCurve 10 Series CPAP and BiPAP Machines Power Supply Cord

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
  • Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
  • ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
Check Stock

Bundle - Pilot-24 Lite CPAP Backup Battery Includes Cables for ResMed S9 Airsense 10 and AirMini - for Travel Camping and Power Loss

  • Bundle includes everything needed to attach to ResMed S9 CPAP machine. Package includes: Pilot-24 Lite, Output Cable for ResMed AirSense 10, Output....
  • Light and small uninterruptible power supply (backup battery) for various 24V PAP devices. Your devices seamlessly continue to receive power even....
  • Compatible with most CPAP, APAP, and some BiPAP devices on the following platforms: ResMed S9, ResMed AirSense 10, ResMed AirMini, *3B Medical Luna,....
  • Includes a built-in LED Flashlight and USB Port for charging portable devices such as smart phones, tablets, MP3 players, cameras etc..
  • Can be used as a portable, standalone power source.Take it travelling and use it to power your compatible PAP device when the main power isn't....
Check Stock

KFD DC Adapter Car Charger for Resmed S10 Series,ResMed Airsense 10 S10 AirCurve 10 Series CPAP and BiPAP Machine,90W Resmed S10 370001 37297 Rockpals 300W/500W Vehicle Power Supply Cord Cable Charger

  • ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
  • ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
  • When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
  • Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
  • Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
  • Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
  • ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
Check Stock

IBERLS Power Cord for Resmed Airsense 10 S10 Series, Cpap DC Converter Supply Adapter Charger Cable for BiPAP Machine, 90W 12V Car Cords

  • [Compatible Products] This airsense 10 cigarette lighter compatible with resmed air sense s10 series cpap and bipap machines and bipap machines s10 370001.
  • resmed aircurve 10 series cpap and bipap machine: aircurve 10 s bilevel machine, aircurve 10 vauto bilevel machine with humidair humidifier, can be used in cars, buses, vans, trucks, boats, and humidifiers or a car home..
  • [Product Parameter] Replace Resmed Airsense S10 Car power cable Total length 2.4M. Input: 12V-24V 12A Max. Output: DC 24V 3.75A 90W..
  • [Safety Settings] Compatible with Resmed CPA car supply cord external equipped with green reminder light to facilitate positioning in the dark when charging.
  • Built-in safety fuse, when the device or charger is faulty, the fuse will automatically fuse, cut off the power supply, play the role of protecting the device, replace a new fuse tube (250V 16A) can be restored to normal work..
  • [Reliable quality] The replacement resmed vehicle adapter passes CE/FCC/RoHS certification, and all of our products are subjected to up to 4 hours of aging test before shipment to ensure safe and reliable operation when in use. It is designed with heat resistant and flame retardant materials. Protect your airsense 10 from short circuits, overvoltage, overcurrent, and ....
Check Stock

TAIFU Resmed Airsense 10 Supplies, CPAP Power Cord for ResMed Airsense 10 Power Supply 90W AirStart 10 CPAP BiPAP Machines & AirCurve 10 370001 37297 37207 Rockpals 300W/500W Airsense 10 DC Adapter

  • [Compatible Products] This airsense 10 cigarette lighter compatible with resmed air sense s10 series cpap and bipap machines and bipap machines s10 370001.
  • resmed aircurve 10 series cpap and bipap machine: aircurve 10 s bilevel machine, aircurve 10 vauto bilevel machine with humidair humidifier, can be used in cars, buses, vans, trucks, boats, and humidifiers or a car home..
  • [Product Parameter] Replace Resmed Airsense S10 Car power cable Total length 2.4M. Input: 12V-24V 12A Max. Output: DC 24V 3.75A 90W..
  • [Safety Settings] Compatible with Resmed CPA car supply cord external equipped with green reminder light to facilitate positioning in the dark when charging.
  • Built-in safety fuse, when the device or charger is faulty, the fuse will automatically fuse, cut off the power supply, play the role of protecting the device, replace a new fuse tube (250V 16A) can be restored to normal work..
  • [Reliable quality] The replacement resmed vehicle adapter passes CE/FCC/RoHS certification, and all of our products are subjected to up to 4 hours of aging test before shipment to ensure safe and reliable operation when in use. It is designed with heat resistant and flame retardant materials. Protect your airsense 10 from short circuits, overvoltage, overcurrent, and ....
Check Stock