ReviewsRetrofit Emergency Ballast Kits

iJDMTOY (2 95mm Rubber Housing Seal Caps Compatible With Headlight Install Xenon Headlight Kit, Aftermarket Headlamp or Retrofit

  • Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
  • Made with high quality flexible rubber (+/- 3mm accommodation) that is ideal for retrofit lighting assemblies.
  • This listing is for 2 pieces of 95mm on the outer diameter size: To select the size of the cap you need, measure the outer diameter of your headlight's rear flange. If you're under by 3mm of the cap size, we recommend going for the next size down.
Check Stock

PARMIDA 24-Pack 4FT LED T8 Hybrid Type A+B Light Tube 18W Plug & Play or Ballast Bypass Single-Ended OR Double-Ended Connection 5000K 2200lm Frosted Cover T8 T10 T12 Shatterproof UL & DLC

  • ✔ INSTALL WITH OR WITHOUT A BALLAST. These Parmida tubes can be installed with a ballast (plug and play) or without a ballast (direct installation).....
  • ● SINGLE OR DOUBLE-ENDED CONNECTION. This tube is UL-Listed for installation with a single-ended or double-ended connection. Fast, simple and secure....
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your....
  • ● FULLY CERTIFIED: UL-LISTED & DLC-CERTIFIED. 5 YEAR UNLIMITED WARRANTY. This product meets strict requirements to be considered energy efficient,....
  • ● SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures,....
Check Stock

Patioer R134A Refrigerant Charging Hose Gauge, Refrigerant Recharge Hose Kit with 3 Pack BPV-31 Bullet Piercing Tap Valve Kit for Car AC Air Conditioning Refrigerant Charging Can to R-12/R-22 Port

  • PACKAGE INCLUDES 5 PACKS: 3 x BPV-31 bullet piercing tap valve kits, each one contains 1 piercing valve, 1 hex key and 2 adapters.
  • 1x R134A U-charge hose with gauge and can tap.
  • PREMIUM MATERIAL: Made of high quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use..
  • R134A CHARGING HOSE: 15.3inch/39cm long, with R-134a can connect R-12 / R-22 service port, 1/2" end port fits for R12, R22, R502 fittings. And the gauge has scale readings for R134, R12, and R22. 90-degree push and lock coupler can auto shut off..
  • EASY TO INSTALL: BPV-31 bullet piercing tap valve kits are equipped with hexagonal wrench of suitable size, which is more convenient to install. Use the retrofit valve to attach the gauge with bullet piercing tap valve..
  • UNIVERSAL RETROFIT VALVE:  Retrofit valve converts from R-12 to R-134a. Fit for 7/16 inch low side port.
  • Suit for vehicles pre-1994, comes with R-134a refill fittings. Replace AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes..
Check Stock

General Electric GE332MV-H 3-Lamp Electronic Ballast, T8, 120-277V, 50/60HZ

Check Stock

GSKMOTOR Rocker Arms Trunion Repair Upgrade Kit Replacemnt for Chev Pontiac LS 4.8 5.3 5.7 6.0 6.2 LS1

  • Economical and practical:These COMP Cams GM LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller trunions for high-rpm race applications. These are more economical than new race rocker arms, and can handle much higher RPM than the factory ones..
  • FITMENT: for 1997-NOW LS1/LS2/LS3/LS6/LS7 4.8/5.3/5.7/6.0/6.2/7.0 Engines.
  • for 1997-2004 Chevrolet/for 1998-2002 Pontiac.
  • Easy to install: Installation is fairly simple with the use of a press or a simple vise along with basic hand tools..
  • Listing included:-16 rocker arm trunnions- LS-type retrofit.
  • 32 rocker arm bearings- LS-type retrofit.
  • 32 rocker arm retaining rings- LS-type retrofit.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock

240W Shoebox LED Retrofit Kit AC100-277V LED Parking Lot Light Fixture Retrofit 5000K Replace 1000W Metal Halide ETL Listed E39 Base for Outdoor Sports Court lights Street Area Lighting Fixture

  • 【SUPER BRIGHT AND ENERGY SAVING】This shoexbox LED retrofit kit provides uniform 34,800lumens at 240W with an incredible Lumen Efficacy of 145 Lm/W to replace 1000W MH/HPS/HID traditional light fixtures, effectively saving 90% of the amount on your energy bills. 80+ CRI Rating and 5000K daylight for super bright outdoor large area lighting..
  • 【RETROFIT OLD LIGHTING FIXTURES, SAVE MONEY】Advanced SMD3030 chips and Meanwell driver ensure our LED shoebox retrofit kit high efficiency, long life and high reliability. Excellent heat dissipation system with overheat protection sensor, aluminum heat sink and high speed fan to protect leds at lower operating temperature. Longer lifespan of 500,00 hours, that's about 23 years of 6 hours per day, which will reduce maintenance cost dramatically..
  • 【EASY & SAFE INSTALLATION】Shoebox led Retrofit Light Kit has a wide 120 degree beam angle. Just connect the E39 base and Meanwell driver to the fixture socket to quickly replace damaged old bulbs. No need to replace existing fixtures. Adjustable U bracket for horizontal and vertical mounting. Please check retrofit kit picture and dimensions to ensure fitment..
  • 【ETL ENSURE WIDE APPLICATION】YELLORE retrofit kit with ETL certifications, ETL approved for use in li....
Check Stock

2-Pack 80W LED Corn Bulbs,E26/E39 Base LED Light,5000K,AC110-277V,LED Replacement Metal Halide HID CFL for Commercial Industrial Lighting Warehouse High Bay Light Fixture Garage Workshop

  • Super bright:80w LED corn light bulbs with 10000lm,LED Replacement 250-300 Watt Metal Halide/HID/HPS/CFL Bulb,800W incandescent bulb or 200W CFL bulb..
  • Instalt on: No buzz,no flicker,360°Shining - no dead corner.Do you tired of constantly changing balasts and bulbs(Don't need ballast, just wire them directly ).
  • Energy Saving and Long Lifespan:Power consumption is 1/10 of incandescent bulb,2/3 of energy-saving bulb under the same brightness,With a life of 50,000 hours,The corn light bulb will last over 23 years (based on 6 hours each day)No longer vexed for regular replacement.
  • Factory Sells Directly:Gtaren offer 24/7 after-sale support,60 days full refund policy and 7 years quality service.If you have any questions, Please feel free to contact us..
  • Wide Application:Suitable for 120v-277v voltage E39 and E27 base.Great for indoor outdoor Street and large Area Light,garage light,warehouse light barn light, Parking Lot High Bay light patio courtyard garden light shop light work light celling light growight wall pack Post Top,acorn,low bay shoebox Light fixture etc,Anywhere need bright light with LED conversion bulbs or LED retrofit kits.
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 5000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 3000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 4000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

4Pack Superiorly 4FT LED Retrofit Kit,36W Magnetic LED Troffer Retrofit Kit 2x4 FT,5400LM,3500K Warm White,T8 T10 T12 Fluorescent Replacement,Transparent Cover,1 Driver 2 Tubes Per Kit

  • Great Design: LED magnetic mount troffer retrofit kit is designed to replace the ballast and tubes in 1'x4'and 2'x4' fluorescent troffers and existing industrial strips or wrap fixtures. This fixture has lightweight and durable polycarbonate to ensure long life, aluminum on the back to provide great heat dissipation..
  • Efficiency & Energy Saving:Our product has an average lifespan of 100,000 hours and can last over 30 years.At the same time,it provides 5400 lumen output that is equal to or higher than traditional fluorescent fixtures and can cut your electric bill by up to 80%..
  • Easy to Install: The strong magnets on the back of the strip around the perimeter provide secure mounting.You just simply attach the magnetic retrofit LED kit inside the existing fixture and install in minutes! Refer to install instructions for detailed stept..
  • Application: This led magnetic retrofit kit is perfect for offices, lobbies, hallways, classrooms, conference rooms, school facilities, libraries, showrooms, airports, shopping malls, workshops, healthcare facilities and so on!.
  • Quality Assurance: 5-year warranty.It means that if you find the product can not work within 5 year or damage delivery,please contact us. We can solve it quickly. Easy and fast replacement is offere....
Check Stock