ReviewsRetrofit Fluorescent Lights

200W Shoebox LED Retrofit Kit 29000LM,5000K E39 Base LED Parking Lot Tennis Court Lights Retrofit Kits AC 100-277V

200w Led Retrofit Kit - With 145 lumens per watt, the led retrofit kit provides 29,000 lumen output. This 200 watt led shoebox retrofit kit is a....
Maintenance Saving - Advanced SMD3030 LEDs and Meanwhile Driver for superior performance and longer lifespan.Excellent heat dissipation system with....
Quick Installation - The led retrofit kits come with E39 Mogul Base - Just screw in. Replace the ballast with the LED Driver and old bulb with the LED....
Wide Application - High Bay led retrofit kit is perfect for retrofitting existing high bay,low bay, wall pack, led parking lot pole lights,led tennis....
5 Year Warranty - ETL DLC listed, which ensures Rebate Eligible and lowest maintenance. We also offer 5 years warranty for the 800 watt metal halide....

Check Stock

Luxrite 4 Inch LED Indirect Downlight Fixture, 10W (60W Equivalent), 2700K Warm White, 650 Lumens, Dimmable, Recessed Can Light, Damp Rated, CRI 90, ETL Listed, E26 Base (2 Pack)

...your home. Each indirect LED downlight fixture pushes light into the reflective inner surface before being sent out, which creates uniform illumination and a gentle light which is easy on the eyes..
INSTANT SAVINGS - Cut down 83% of your electricty usage by switching your 60 watt ceiling downlight with a 10 watt LED retrofit recessed light. Immediately trim the cost of your electricty bill by making the investment into energy saving lights..
DIMMABLE - Get the lighting you deserve at the flip of a switch with the ability to reduce to 10% lighting output. Enjoy the full brightness of these energy saving down lights or take control of the atmosphere by adjusting your lights to a lower setting. No delay or warm up time needed, balance your lights to suit your mood..
BRILLIANT COLOR QUALITY - Gain vibrant lighting and uniformity similar to a natural light source with each indirect LED lighting fixture that is equipped with a high CRI of 90 . These retrofit LED recessed lights are ideal for your kitchen, bedroom, living room, or any space in your home..
SPECIFICATIONS - 10W (60W Equivalent), 2700K (Warm White), CRI 90, 650 Lumens, 150° Beam Angle, Dimmable, Damp Location Rated, ETL Listed, 4 Inch LED Retrofit Can Light, 50,000 Hour Lifetime, E26 Adapter Base....

Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL - 5000K

BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable.UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..

Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, UL - 4000K

BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..

Check Stock

Silverlite 6.5

2x40watt incandescent, 2x11watt CFL or 20watt T9 circline equivalent while only 17watt used, at least 70% energy saving, drastically reduce your electricity bill.
With the latest integral driver-on-board(DOB) and 120V AC drive technology, no extra external AC-DC driver needed, high-end solution to retrofit your fancy ceiling lights.
Down to 5% triac dimming capacities, totally flicker free, much even lights and no more ugly light spot, 80+ CRI(Color Rendering Index), multiple and easy installation.
40,000 hours lifespan, it is 4x longer than CFLs(10,000hours). 5 years limited warranty, UL approved for use in luminaires and suitable for damp location, lowest maintenance, risk-free purchase.
Application: ceiling fan light, pandent, ceiling light, lantern light, garden light and other fixtures which have a plate to attach this retrofit kit. Check the inner diameter of your fixture before place an order.

Check Stock

Educational Insights The Original Fluorescent Light Filters Tranquil Blue 4-Pack Fluorescent Light Covers Easy Install for Classrooms Office Hospitals & Home Teacher Classroom Decor

CREATE A CALM AND PLEASANT ENVIRONMENT: Create a calm and soothing environment by decreasing glare and flickering from overhead fluorescent lights.
REDUCE HARSH GLARE THAT CAUSES HEADACHES: Light covers for ceiling lights reduce harsh glare and flickering lights that can cause eyestrain,....
EASY INSTALLATION: 4 panels fit over standard ceiling fluorescent light fixtures with sturdy, sewn-in magnets, creating a soothing working environment.
HEAT RESISTANT AND CERTIFIED SAFE: Includes four 2' x 4' heat-resistant Fluorescent Light Filter panels and Certificate of Conformance for flame....
FOR OFFICE, HOSPITALS, SCHOOL OR HOME USE: Perfect for any space with ceiling lights & fluorescent lighting like the office, hospitals, classroom,....

Check Stock

12-Pack JACKYLED Non-Shunted Turn-Type T8 Lamp Holder UL Socket Tombstone with 10 inches Wires Attached for LED Fluorescent Tube Replacements

Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
Max Voltage: 601V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 101% safe from fire hazard, durable even after years of use..
Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires, plug the tube in and twist, a plug-and-play solution for your lighting projects..
Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T9 lights..
100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..

Check Stock

Durolux DLED842SW 100W LED Grow Light - Over 50% EnergySaving! (4 FT, White - FullSun Seed & Veg)

LED Grow Light, 6 FT Grounded Power Cord, Hanging Chain, All Included in Package.
Consumes only 50W. Save 50% electricity with 50 watt LED Grow Light.
Only 50W can Retrofit 100W T5 Fluorescent Grow Light | 0.5W LEDs, 160 pcs.

Check Stock

Non-shunted Turn Type T8 Lamp Holder JACKYLED 50-Pack UL Socket Tombstone for LED Fluorescent Tube Replacements Medium Bi-pin Socket for Programmed Start Ballasts

Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use..
Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects..
Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T8 lights..
100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..

Check Stock

Non-shunted Turn Type T8 Lamp Holder JACKYLED 30-Pack UL Socket Tombstone for LED Fluorescent Tube Replacements Medium Bi-pin Socket for Programmed Start Ballasts

Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W.
Max Voltage: 600V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more..
UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 100% safe from fire hazard, durable even after years of use..
Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 18 AWG Wire. Just connect the wires (not included), plug the tube in and twist, a plug-and-play solution for your lighting projects..
Wide Application: Perfect for anywhere from home, office, basement, closet to studio that needs a lighting retrofit, while staying low profile between the T8 lights..
100% Satisfaction: We strive to provide each customer with the highest standard of customer service to ensure you have a pleasant shopping experience. If you have any issues, inquiries or need assistance, please feel free to contact us directly..

Check Stock

Hampton Bay Universal LED Ceiling Fan Light Kit

2x60watt incandescent, 2x13watt CFL or 20watt T9 circline equivalent while only 23watt used, at least 70% energy saving, drastically reduce your electricity bill, Energy Star certified.
With the latest integral driver-on-board(DOB) and 120V AC drive technology, no extra external AC-DC driver needed, high-end solution to retrofit your fancy ceiling lights.
Down to 5% triac dimming capacities, totally flicker free, much even lights and no more ugly light spot, 90+ CRI(Color Rendering Index), multiple and easy installation.
40,000 hours lifespan, it is 4x longer than CFLs(10,000hours). 5 years limited warranty, UL approved for use in luminaires and suitable for damp location, lowest maintenance, risk-free purchase.
Application: ceiling fan light, pandent, ceiling light, lantern light, garden light and other fixtures which have a plate to attach this retrofit kit. Check the inner diameter of your fixture before place an order.

Check Stock