LENCO MARINE 15064-001 Bennett Retrofit Kit - 12V
- Connecter plugs into existing wire harness.
ReviewsRetrofit Kits
Luxrite 4 Inch LED Indirect Downlight Fixture, 10W (60W Equivalent), 2700K Warm White, 650 Lumens, Dimmable, Recessed Can Light, Damp Rated, CRI 90, ETL Listed, E26 Base (2 Pack)
- ...your home. Each indirect LED downlight fixture pushes light into the reflective inner surface before being sent out, which creates uniform illumination and a gentle light which is easy on the eyes..
- INSTANT SAVINGS - Cut down 83% of your electricty usage by switching your 60 watt ceiling downlight with a 10 watt LED retrofit recessed light. Immediately trim the cost of your electricty bill by making the investment into energy saving lights..
- DIMMABLE - Get the lighting you deserve at the flip of a switch with the ability to reduce to 10% lighting output. Enjoy the full brightness of these energy saving down lights or take control of the atmosphere by adjusting your lights to a lower setting. No delay or warm up time needed, balance your lights to suit your mood..
- BRILLIANT COLOR QUALITY - Gain vibrant lighting and uniformity similar to a natural light source with each indirect LED lighting fixture that is equipped with a high CRI of 90 . These retrofit LED recessed lights are ideal for your kitchen, bedroom, living room, or any space in your home..
- SPECIFICATIONS - 10W (60W Equivalent), 2700K (Warm White), CRI 90, 650 Lumens, 150° Beam Angle, Dimmable, Damp Location Rated, ETL Listed, 4 Inch LED Retrofit Can Light, 50,000 Hour Lifetime, E26 Adapter Base....
Luxrite New Construction Mounting Plate, 2-3-4 Inch, Extendable Hanger Bars, Sliding Plate, 4 Cutout Sizes - Recessed Lighting Shallow Housing (6 Pack)
- FIT TO YOUR LIGHT - Accommodates a wide range of 2 Inch, 3 Inch, and 4 Inch LED retrofit downlights. Great when paired with ultra thin or low profile recessed lighting kits with junction box. There are 4 different hole sizes so you can find which will work for your setting..
- ADJUSTABLE DESIGN - Both 13.75 inch hanger bars are extendable to a maximum length of 25.88 inches and the mounting plate can slide along the bars from end to end..
- NEW CONSTRUCTION - Perfect for installing LED recessed lighting kits into new house constructions or home remodels..
- EASY INSTALL - Each mounting plate is quick and simple to install with the included bracket nails. Every nail also has a stopper which allows for easier removal, when needed. Model # LR41004.
Boltigen R134A Refrigerant Charge Hose Gauge Kit-A/C Refrigerant Charge Hose Gauge Set with 1 BPV-31 Bullet Piercing Tap Valve,1 Retrofit Valve Fits for Car AC Air Conditioning Refrigerant Charging
- 【R134A REFRIGERANT RECHARGE HOSE GAUGE KIT】Our r134a freon refill kit includes：1pcs R134a refrigerant charge hose with gauge and piercing can....
- 【BPV-31 BULLET PIERCING TAP VALVE】Our bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Our bullet....
- 【R134A REFRIGERANT RECHARGE HOSE with GAUGE】The length of our r134a charging hose with gauge and piercing can tap is:19 inch hose (with gauge ,....
- 【A/C RETROFIT VALVE】Our universal a/c retrofit valve converts from R-12 to R-134a air conditioning system and suit for 7/16 inch low side port.
- 【EASY to INSTALL】Our BPV-31 bullet piercing tap valve kits come in compact design that only requires a 2-inch clearance area for installation and....
Sharpe Valves 44834 Series Carbon Steel Globe Valve, Bolted Bonnet, Inline, 1/4\ Socket Weld
- Size ranges of 1/2 in. through 2 in. with several styles of electric and pneumatic actuators offer a broad selection.
- American National Standards Institute (ANSI) Class 250 (pressure/temperature) standard compliant.
- Tight shutoff testing ensures occupant comfort and energy conservation.
- Standard Johnson Controls Ring Pack Packing's provide industry-leading reliability and operating life.
- Complete actuator interchangeability allows easy field retrofit or mounting using standardized mounting kits.
Honeywell, Inc. V5013N1089 1-1/2 inch Three-Way Threaded Globe Valve, 29.3 Cv
- Size ranges of 1/2 in. through 2 in. with several styles of electric and pneumatic actuators offer a broad selection.
- American National Standards Institute (ANSI) Class 250 (pressure/temperature) standard compliant.
- Tight shutoff testing ensures occupant comfort and energy conservation.
- Standard Johnson Controls Ring Pack Packing's provide industry-leading reliability and operating life.
- Complete actuator interchangeability allows easy field retrofit or mounting using standardized mounting kits.
Topaz Lighting (Pack of 2) 70885, 4 Inch CCT Selectable, LED Slim Fit White Recessed Downlight, 9 Watts, 5 CCT Selectable Switch 2700K, 3000K, 3500K, 4000K and 5000K, Half Inch Ultra Thin Low Profile
- PACK OF 2: Topaz’s Slim Fit Recessed Downlight is 5 CCT selectable. Choose from five color temperatures with one convenient switch, right on the job site. 5 CCT selectable switch: 2700K, 3000K, 3500K, 4000K and 5000K..
- The improved half-inch profile design is approved for IC and non-IC applications. Enhanced low profile design with 1/2" ultra-thin white aluminum die-cast construction and acrylic lens..
- Quick-connects and a remote J-box offer easy installation. Extension cables and frame-in kits allow for versatile applications in new construction and retrofit projects..
- Easy to install with spring clips and quick-connects without the need of housings. IC Rated, approved for use in insulated ceiling and non-insulated ceiling. Airtight certified per ASTM-E283. Remote J-box provides flexibility in mounting..
- SUGGESTED APPLICATIONS: Retrofit and new construction, Commercial, residential and multi-family buildings, Low clearance areas, closets, stairwells, soffits, bathroom, and living areas..
R12 To R134a Conversion Kit with Dust Cap R12 R22 R502 to R134A Fast Quick Conversion Adapter Switch Adapter Valve 1/4Inch SAE Low Side Port Adapter R134A Quick Coupler Interface and Core Valve
- [R12 To R134a Conversion Kit Packing Includes] Includes 1 Pc R12 to R134A Retrofit Valve with 1Pc Dust Cap..
- [R12 To R134a Adapter Compatibility] Switch for automotive air conditioning refrigerant systems converting from R12, R22, R502 to R-134A. Low Side....
- [R12 To R134a Retrofit Kit Installation] Easy to be installed, Save time and effort, can be supported used with the valve by screw connection.for....
- [R22 Freon Quality] Durable material: The kits are made of high-quality Aluminum alloy that won't wear out or rust over time and an anti-leaking....
- [R134a Quick Coupler Service Gurantee] This R12 To R134a Conversion Kit come complete with a 1-Year warranty. Our department Usually does a 100%....
2-Pack 50w Corn LED Light Bulb,E26/E39 led Corn Bulbs,120-277v 5000k,Led Replacement HID HPS CFL Metal Halide Lamp for Indoor Outdoor Garage Yard Driveway Storage Room Work Shop
- Super bright:50w LED corn bulbs with 6500lm,Equivalent 400w-500w Incandesce bulb,Led retrofit 125w-150w Fluorescent bulb.Led replacement 175w-200w Metal Halide Lamp ed17 HID HPS Bulb..
- Instalt on: No buzz,no flicker,360°Shining - no dead corner.Do you tired of constantly changing balasts and bulbs(Don't need ballast, just wire them directly ).
- Energy Saving and Long Lifespan:Power consumption is 1/10 of incandescent bulb,2/3 of energy-saving bulb under the same brightness,With a life of 50,000 hours,The corn light bulb will last over 23 years (based on 4 hours each day)No longer vexed for regular replacement.
- Factory Sells Directly:Gtaren offer 24/7 after-sale support,60 days full refund policy and 5 years quality service.If you have any questions, Please feel free to contact us..
- Wide Application:Suitable for 110v-277v voltage E39 and E26 base.Great for indoor outdoor Street and large Area Light,garage light,warehouse light barn light, porch,yard High Bay light patio courtyard garden light shop light work light celling light post light wall pack Post Top,acorn,low bay shoebox Light fixture etc,Anywhere need bright light with LED conversion bulbs or LED retrofit kits.
Brian Tooley LS1 Rocker Arm Trunion & Bolt Kit 4.8 5.3 5.7 6.0 6.2 Trunnion BTR
- Brian Tooley LS Rocker Arm Upgrade Trunion Kit Includes Allen Head Bolts.
- These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
- The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
- These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
- Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Brian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts
- Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
- These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
- The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
- These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
- Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.