ReviewsRetrofit Panels

Morris 72629 LED Recessed Lighting Retrofit Kit 8\ 35W 3000K Baffled Bezel

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72626 LED Recessed Lighting Retrofit Kit 8\ 25W 3000K Baffled Bezel, 6-Pack

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

Morris 72631 LED Recessed Lighting Retrofit Kit 8\ 35W 5000K Baffled Bezel, 6-Pack

  • Led recessed lighting retrofit kits 8 inch.
  • Led retrofit kits for recessed down lighting.
  • Simple screw in installation including in-line pluggable disconnect.
Check Stock

iJDMTOY (2 95mm Rubber Housing Seal Caps Compatible With Headlight Install Xenon Headlight Kit, Aftermarket Headlamp or Retrofit

  • Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assemblies.
  • Seals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances.
  • Made with high quality flexible rubber (+/- 3mm accommodation) that is ideal for retrofit lighting assemblies.
  • This listing is for 2 pieces of 95mm on the outer diameter size: To select the size of the cap you need, measure the outer diameter of your headlight's rear flange. If you're under by 3mm of the cap size, we recommend going for the next size down.
Check Stock

Morris Products 72656 LED 4\ Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K, 1-Pack

  • LED 4" Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K provide an energy efficient alternative to Incandescent lighting..
  • LED 4" Commercial Recessed Lighting Retrofit Kit 15 Watts 3000K features include:.
  • Can be installed in most 4" downlight cans.
Check Stock

Baseboarders Premium 4 ft Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (No Accessory)

  • ...rs Premium Series End Caps (Closed EC001-RT,LF-WHT, Open EC002-RT,LF-WHT, Zero ZC001-WHT)are sold separately. When combined with end caps the panel can span between 48”-51.5”.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products wi....
Check Stock

Baseboarders Premium Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (Any Size, Zero Clearance End Cap)

  • ...re symmetrical, there are no left or right sides. Used when the original back plate terminates within ½” of adjacent wall. Designed to snap onto the ends of Premium Baseboarders.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will....
Check Stock

Litorange 2 PCS Lead Free Brass Construction 1/2' by 1/2-Inch Female Threaded PEX Pipe Barb FNPT Swivel Elbow Plumbing Connection Crimp Fittings

  • ★ Lead Free Compliant Brass. Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents..
  • No Flames, Glue, Fluxes, or Solvents Needed. Approved to be used underground and behind walls without access panels.
  • etc. Certified for use in potable water applications..
  • ★ Resists corrosion and mineral buildup, rust, and freeze damage. Suitable for new or retrofit construction and for hot or cold water distribution..
  • ★ Package include: 2 PCS 1/2" PEX elbow fitting..
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover, No Accessory)

  • ...rs Elliptus Series Endcaps (Closed EC005-LF,RT-WHT, Open EC006-LF,RT-WHT, Zero ZC005-WHT) are sold separately. When combined with end caps the panel can span between 24”-27.5”.
  • Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will....
Check Stock

GSKMOTOR Rocker Arms Trunion Repair Upgrade Kit Replacemnt for Chev Pontiac LS 4.8 5.3 5.7 6.0 6.2 LS1

  • Economical and practical:These COMP Cams GM LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller trunions for high-rpm race applications. These are more economical than new race rocker arms, and can handle much higher RPM than the factory ones..
  • FITMENT: for 1997-NOW LS1/LS2/LS3/LS6/LS7 4.8/5.3/5.7/6.0/6.2/7.0 Engines.
  • for 1997-2004 Chevrolet/for 1998-2002 Pontiac.
  • Easy to install: Installation is fairly simple with the use of a press or a simple vise along with basic hand tools..
  • Listing included:-16 rocker arm trunnions- LS-type retrofit.
  • 32 rocker arm bearings- LS-type retrofit.
  • 32 rocker arm retaining rings- LS-type retrofit.
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock

A/C Retrofit Valve Kit-Refrigerant Retrofit Valve Set, with R12 to R134A Low Side Adapter, BPV31 Bullet Piercing Valve, for HVAC Refrigerant System R12 R22 R502 R134A (2)

  • 【A/C Retrofit Valve Kit】The a/c recharge valve kit includes:1 pieces r22 to r134a low side adapters with dust cap, 1 pack BPV31 bullet piercing tap valve (with 1 piercing valve, 1 hex key, 2 adapters).
  • 【R12 to R134A Retrofit Conversion Adapter】The ac retrofit valve with blue dust cap with 7/16” low side port can convert from R12, R22, R502 to R134a.
  • 【BPV-31 Bullet Piercing Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. And the bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • 【Premium Material】The r12 to r134a retrofit conversion fitting is made of premium brass and the BPV-31 bullet piercing tap valve is made of zinc alloy, which make the retrofit valve kit durable for long-time use to meet your daily repair work need.
  • 【Wide Application】The a/c recharge valve kit usually used for automotive or home air conditioning refrigerant systems. Suit for vehicles pre-1994, comes with R-134a refill fittings.
Check Stock