ReviewsReusable Hose Fitting

1\ Heavy Duty Double Gripping Nylon Hose Clamps, 225° F / 200 PSI Rated, 10 Pack (Made in USA/UK)

For use with 1.5" OD (OUTER DIAMETER) Tubing/Hose. Double Grip - Second row of teeth for a more secure grip than conventional nylon clamps.
Made from UV/Heat Stabilized 6/6 Nylon. Easy to install and reusable..
-40C to 125C/225F Long Term Operating Temp Range (up to 170C/340F Occasional Peak Temp).
Resists pressures up to 200 PSI and above depending on clamp size and hose/fitting quality.
High chemical resistance inlcuding gasoline (with or without methanol), oils, and most solvents.

Check Stock

5/8\ Heavy Duty Double Gripping Nylon Hose Clamps, 225° F / 200 PSI Rated, 10 Pack (Made in USA/UK)

Double Grip - Second row of teeth for a more secure grip than conventional nylon clamps.
For use with 1/2" OD Tubing/Hose. Made from UV/Heat Stabilized 6/6 Nylon. Easy to install and reusable..
-40C to 125C/225F Long Term Operating Temp Range (up to 170C/340F Occasional Peak Temp).
Resists pressures up to 200 PSI and above depending on clamp size and hose/fitting quality.
High chemical resistance inlcuding gasoline (with or without methanol), oils, and most solvents.

Check Stock

POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black

...to connect your shop vac or 2-1/2” dust collection system to a 1-1/2” tool port, an additional 1-1/2” screw on adapter, Powertec 70296, is available. Simply remove the 1”ID adapter and replace it with the additional 1-1/2” ID adapter.
INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter.
APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris.
VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-1/4” adapter should fit most shop vac ports with a nominal ID of 2-1/4”. Shop Vac ports sizes can vary between different manufacturers. Please refer to the actual adapter sizes before ordering, to verify that it will work for your application.
DIMENSIONS: Dust collector hose 1-3/16" O.D x 10ft long | ABS vacuum dust hose adapter nominal 2-1/2" O.D actual 2-27/64”| ABS vacuum dust hose adapter nominal 2-1/4"....

Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....

Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....

Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....

Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....

Check Stock

Boltigen Pressure Washer Swivel Fitting, Anti Twist 3/8 NPT Male to Female Stainless Steel Connector Joint, 360 Degree Kink Free Swivel Fitting (3/8 NPT Male to 3/8 NPT Female-1Pc)

【Swivel Fitting】 Kink free Swivel Joint for pressure washer with 3/8'' NPT male and female thread fitting，connects hose to hose or gun to hose..
【Smart Design】 Pressure washer swivel joint with 360 degree rotation, eliminates twists and kinks on working, reduces stress on not only hose and gun, but also operator..
【High Working Pressure】 Working pressure of washer gun fitting is up to 4500 PSI and working temperature is up to 250 °F, suitable for hot and cold water. Pressure washer fitting is made of high quality stainless steel, resistance to corrosion and long life using. Max Flow Rate: 30.0 GPM..
【Application】 Suitable for connect swivel fitting between gun and hose, Swivel fitting rotates freely, reduces the strain on your wrist when using the pressure washer..
【Quality Warranty】 The stainless steel pressure washer swivel joint for your pressure washer gun and hose. We did 100% inspection before goods leave our factory, if you have any problem with these products, we will 100% refund to you or replace a new set for you..

Check Stock

Selizo 40Pcs Hose Clamp Including 7 Sizes Adjustable Pipe Tube Clamps 304 Stainless Steel Hose Clips

NICE ASSORTMENT SIZES – The stainless clamps include 7 different diameters steel hose clamps to adapt to different hoses: 6-12mm, 10-16mm, 13-19mm, 16-25mm, 19-29mm, 18-32mm, 21-38mm. The Clamp kit are flexible and ductile with wide adjustable size range from 6 to 38mm/0.24-1.5 inches.
EASY TO INSTALLL AND REUSABLE – The hose clamp designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. These clamps also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
WIDELY USED – The pipe tube clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications.

Check Stock

Selizo 12Pcs Hose Clamps 4 Inch Hose Clamp 304 Stainless Steel Hose Clamps Duct Clamp Worm Gear Adjustable 91-114mm Hose Clamp Fuel Line Clamp for Plumbing Automotive and Mechanical Applications

PACKAGE INCLUDES: The stainless hose clamp kit comes with totally 12 pieces hose clamps with adjustable size range from 91 mm to 114 mm, perfect for hose outside diameter 91-114mm / 3.6-4.4 inch.
304 STAINLESS STEEL HOSE CLAMP –The hose clamp is made of high quality and premium heavy duty 304 stainless steel material that are more salt resistant, anti-rust, anti-corrosion, water proof, oil proof than other 201 stainless steel. Solid and sturdy material ensure the adjustable hose clamps last a long time for use.
FLEXIBLE ADJUSTABLE SIZE RANGE – The 4-inch hose clamps stainless steel can be adjusted from 91-114mm / 3.6-4.4 inch. Flexible and ductile for use.
EASY TO INSTALLL AND REUSABLE – The stainless clamps designed with a worm gear mechanism to adjust the clamp’s diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage. The clamp hose also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
WIDELY USED – The spring hose clamps are used in securing ducting, dryer vent, hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications.

Check Stock

10 Pack Breeze 64064H Power Seal Clamps with 410 Stainless Screw Effective Diameter Range: 3-9/16\ - 4-1/2\ (91mm - 114mm)

Resists pressures up to 200 PSI and above depending on clamp size and hose/fitting quality.
-40C to 125C/225F Long Term Operating Temp Range (up to 170C/340F Occasional Peak Temp).
For use with 5/16" OD Tubing/Hose. Made from UV/Heat Stabilized 6/6 Nylon. Easy to install and reusable..
Double Grip - Second row of teeth for a more secure grip than conventional nylon clamps.
High chemical resistance inlcuding gasoline (with or without methanol), oils, and most solvents.

Check Stock