ReviewsReverse Switch

QTEATAK DC 12V 10A 6 Pin 3 Position ON -Off- ON AC 110V-220V Waterproof Momentary Polarity Reverse Switch Motor Control Black Boat Rocker Toggle Switch with Wire KCD4-223-QT

  • Product name: Waterproof Momentary Reverse Polarity Switch.
  • Switch Rated current/voltage: 16A 250V AC 20A 125V AC.
  • The polarity reversing switch can control the positive and negative rotation of the motor by connecting the power and ground and the motor "+","-".....
  • Package Content: 1 x reverse polarity switch.
Check Stock

ZZHXSM 4pcs Rocker Switch Panel 48x24x12mm Black ABS Rectangular Rocker Switch Blank Snap-in Hole Plug Cover Bracket Filler for Standard Rocker Switch Panel Hole

  • Product name: Reverse Polarity Waterproof Momentary Rocker Switch with red LED and Jumper Wires. This switch is an instantaneous automatic reset action, and automatically returns to the original state after being released..
  • Product Features: switch comes with jumper bars for polarity reversing,connect power and ground and two DC motor leads and the switch will reverse the motor direction.Line length:21.2cm/8.3''. The switch has a protective cover, dustproof and waterproof, durable.
  • Product parameters: Switch Size: 33 x 23 x 29mm/1.3'' x 0.99'' x 1.0''.Hole Size:27 x 15.5mm / 1.0"x 0.6". Type:DPDT. Position: ON-Off-ON 3 position.Voltage:16A 250V AC/20A 125V AC/20A 12V DC/10A 24V DC..
  • Product Applications:switch can be used for cars,Camper,RV, boats, trucks, motorcycles, electronics modifications..
  • Product package:1pcs rocker switch+4pcs Connect jumper wires..
Check Stock

Mophorn Boat Throttle Control 5006186 Side Mount Outboard Remote Control Single Lever Binnacle with Key Switch and Lanyard fits for Evinrude and Johnson Outboards Throttle Gear Control

  • Smooth Forward & Reverse: Moving the lever forward from the neutral position can engage a forward gear, and pulling the lever back from neutral engages the reverse gear. The engine will continue to run at idle until the lever is moved about 32°. Then, move the control lever farther to open the throttle, and the engine will begin to accelerate..
  • Durable Trim Harness: The control cable features high-temperature resistance, thermoplastic insulation, and remarkable color coding. The harness contains a trim/tilt switch connector and key & neutral protection switch. A serviceable cord facilitates remote power use..
  • Ergonomic Designs: The power trim and tilt system can adjust the outboard motor angle. Press the switch “up,” the outboard motor tilts and goes up.
  • Press the switch “down,” and the outboard motor tilts and goes down. And set the control lever to neutral, push the free accelerator button, and rotate the control lever. The throttle can be opened without shifting into any gear..
  • Reasonable Designs: The outboard remote control’s structure is very stable and practical. There is a control lever, durable grip, friction adjustment knob, trim and tilt switch, a control lever for smooth reverse and forward, and various accessories to complete the ....
Check Stock

Mophorn Binnacle Remote Control Box Boat Throttle Control 704-48205-P1-00 Outboard Remote Control Box Fit for Yamaha Console 704 Single

  • Smooth Forward & Reverse: Moving the lever forward from the neutral position can engage a forward gear, and pulling the lever back from neutral engages the reverse gear. The engine will continue to run at idle until the lever is moved about 32°. Then, move the control lever farther to open the throttle, and the engine will begin to accelerate..
  • Durable Trim Harness: The control cable features high-temperature resistance and remarkable color coding. The harness contains trim & tilt switch connection cable and key switch panel connector. Serviceable cord facilitates remote power use..
  • Ergonomic Designs: The power trim and tilt system can adjust the outboard motor angle. Press the switch "up," the outboard motor tilts and goes up.
  • Press the switch "down," and the outboard motor tilts and goes down. And set the control lever to neutral, push the free accelerator button, and rotate the control lever. The throttle can be opened without shifting into any gear..
  • Reasonable Designs: The outboard remote control's structure is very stable and practical. There is durable grip control, a lever-free accelerator button, a control lever for smooth reverse and forward, and various accessories are also provided to complete the work efficiently..
Check Stock

6 Gang Marine Boat Rocker Switch Panel 12V Waterproof RV Led Switch Panel for Car Truck Marine Boat, Digital Voltmeter Display Dual USB Charger Port DC 12 Volt Socket 12/24V Blue Lighted

  • Multifunction Switch Panel Kit: included 6 on-off 5pin Blue LED rocker switch, 12V cigarette socket, 2.1A/5V & 1A/5V dual usb charger and digital voltmeter, great for all types of circuit control, charging needs and voltage monitoring..
  • Waterproof: Marine 6 switch panel has splash-proof panel face, water resistance caps and anti-seepage rubber ring, gasket..
  • DIY Switch Sticker: switch panel with 100 universal style sticker can customize your personal switch..
  • Multi-layer Protection: with 3 pcs 15A Fuse - output short circuit, overload, reverse polarity protection. Safely protecting with anti-reverse, very convenience for using. Pre-wire to protect the switches and function device. You needn't connect additional fuel box for it..
  • Quality 6 Gang Switch: Heavy duty ABS plastic face panel. Waterproof, Totally Environment Friendly,100% quality test ,perfect for your machine.
Check Stock

IndusTec Wired 20A 12V - DC Motor Polarity Reversing Rocker 3 Position DPDT Momentary Automatic Reset Switch (On)-Off-(On) 6 Pin DPDT Double Pole Double Throw

  • DPDT Rating: 30 amps at 12 Volt DC and 15 Amps at 24 Volts DC. Has four prong post with built in jumper bars for Polarity Reverse. Size: This Reverse Polarity Switch with 1.47''X0.83''(37.4X21mm) Cut-out Size and 1.736''X0.95''(44.1X24.13mm) Housing Size. Has 8 inch 12 AWG wires with .250 quick connect female plug installed. Three Position. Components and hardware included. Rubber External gasket cover to protect panel from dirt, dust and rain. Not waterproof. Push Button..
  • This is a momentary electrical system switch used for jogging or inching operations. A DPDT switch is equivalent to two SPDT switches. Dual Operation. It routes two separate circuits, connecting each of two inputs to one of two outputs. The position of the switch determines the number of ways in which two contact can be routed. Always make sure you are using a switch and wire sufficient to handle the load you are carrying. In higher draw applications, a relay may be needed..
  • Can be used to replace SWT-ROC-MOM-4W, 129-PR-MOM. Atwood Power Jack numbers: 80236, 80511, 80515, 80530, 80509, 80524. Direct Replacement for Atwood Part# 87570 and Lippert Components part number 226023. Other part numbers: KCD2-7-223-4P-X, ‎KCD2-7-223B.
  • Can be used to replace Drum, Rotary, Cable, Adapter, Rel....
Check Stock

Mophorn Boat Throttle Control 881170A15 Mercury Single-Engine Control with 8 Pins Side Mounted Outboard Control Box with Emergency Lanyard

  • Smooth Forward & Reverse: Moving the lever forward from the neutral position can engage a forward gear, and pulling the lever back from neutral engages the reverse gear. The engine will continue to run at idle until the lever is moved about 32°. Then, move the control lever farther to open the throttle, and the engine will begin to accelerate..
  • Durable Trim Harness: The control cable features high-temperature resistance, thermoplastic insulation and remarkable color coding. The harness contains a 9-core plug connector to engine and trim/tilt switch connector. 15FT long cord facilitates remote power use..
  • Emergency Lanyard Cord: This engine security switch lanyard lord is made of high quality woven nylon fiber, which provides security and durability. The lanyard lord is extendable and flexible, the premium plastic ring clip is used to insert into the flameout switch, and the ABS plastic spring buckle hook is to connect with the operator, preventing the operator falling or leaving the helm..
  • Reasonable Designs: The outboard remote control's structure is very stable and practical. There is neutral lock lever, neutral thro....
Check Stock

Timer Relay DC 12V 24V Time Delay Relay Controller Board, PEMENOL LCD Display Digital Timer Switch Trigger Cycle Timer Module for Smart Control Power On-Off Controller

  • ...7 mode, short press the DOWN key to switch the display content (running time/cycle number).
  • ★Support Button Trigger Control: The relay module delay power off and trigger delay cycle timing circuit switch Support button trigger control, high and low level trigger, switch control, suitable for most occasions.
  • ★With Reverse Connection Protection: This trigger delay cycle timing circuit switch has a key pause function, with reverse connection protection, the reverse connection does not burn.
  • ★Support UART Data Upload and Parameter Setting: You can set different OP, CL, LOP parameters, these parameters are independent of each other and saved separately. All set parameters are automatically saved after power-off. For more details, please read the user manual.
  • ★Automatic Sleep Function: In the running interface (P0~P7 mode), long-press the pause button to start or close the automatic sleep function (L-P selects on to start the sleep function, about five minutes, without any operation, the LCD backlight automatically turns off, the system Normal operation, press any button to wake up.
  • press the off button to turn off the sleep function).
Check Stock

Hengha Golf Cart Key Switch Starter Ignition Fit for EZGO RXV Electric 48V 2008+ 605637 609682 611283

  • 1.OEM#101753005 after-sale market #5770..
  • 2.The heavy duty forward and reverse switches are made of high-quality steel and top-grade copper to ensure that the switch can pass through high current without deformation and improve the reliability and stability of the product. Plastic materials are made of fireproof insulating materials to prevent combustion and improve the service life as a whole. Our products must undergo rigorous testing before leaving the factory, please be assured to buy..
  • 3.This heavy duty forward and reverse switch assembly, including: Forward and reverse switchx1 #101753005 Handlex1#1012987,Screwx4#1013198 Nutx3, Please ensure that the corresponding connecting wires are correct,easy to install..
  • 4.Not suitable for Club Car 36V DS Gasoline and Precedent..
  • 5.1 year warranty. We have very strict requirements for our product. If you have any difficulties in installing or replacing any accessories, please feel free to contact us, we will solve the problems for you, thank you!.
Check Stock

NEW B&M AUTOMATIC PRO RATCHET SHIFTER,UNIVERSAL 3 & 4 SPEED,BRUSHED ALUMINUM COVER & CHROMED STEEL STICK,COMPATIBLE WITH TH400,350,250,200,700R4,4L60,4L60E,4L65E,4L80E AUTO TRANSMISSIONS

  • The Pro Ratchet shifter is one of our most popular & easiest to operate race shifters. Features include positive ratcheting design that self-centers the handle after each shift giving you maximum clearance behind the shifter & will not allow you to miss a shift by over-shifting a gear. The reverse lockout feature only requires one hand to operate & meets both NHRA & IHRA safety regulations..
  • Other features include a neutral safety switch, backup light switch, along with a brushed aluminum cover and a classic white shift knob with the B&M logo. Also includes a 5-foot long Super-duty shift cable, gear indicator, cable brackets, transmission levers, all necessary hardware and detailed instructions for an easy at home installation..
  • Features: Reverse Lockout Meet NHRA/IHRA Safety Requirements | Controls 3 or 4-speed Automatic Transmissions | Includes Super-Duty Race Cable and Hardware | Super Reliable and Race Proven Shifter Design | Forward or Reverse Shift Pattern Compatible | One-handed Reverse Lock-out Operation | Includes Brushed Aluminum Cover | Overall dimensions - 10.75L x 2.9W x 9.25H.
  • NOTE: Fits GM TH400, 350, 250, 200, 700R4/4L60, 4L60E, 4L65E, 4L80E automatic transmissions (for 4L60E, 4L65E, 4L80E with PRNDL switch, use....
Check Stock

BLACK+DECKER Cordless Screwdriver with Pivoting Handle, 3.6V (Li2000)

  • 3-POSITION HANDLE – Lets you work in tight spaces without sacrificing comfort..
  • SPINDLE LOCK – Allows for manual screwdriving, giving you increased control..
  • FORWARD/REVERSE SWITCH – Toggle between driving screws and easily removing them..
  • COMPACT AND LIGHTWEIGHT – Ergonomic, streamlined design makes it easy to carry with you from job to job..
  • 3.6V LITHIUM ION BATTERY – Rechargeable battery holds its charge for up to 18 months..
  • INCLUDES – (1) Li2000 screwdriver, (2) hex shank screwdriver bits, (1) charger..
  • Lithium Ion Battery holds a charge for up to 18 months.
  • Three-position handle lets you work in tight spaces.
  • Spindle lock allows manual screwdriving and greater control.
  • Forward and reverse switch for easy screwdriving and screw removal.
Check Stock