ReviewsRexroth Filter Regulator

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

  • REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
  • GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
  • At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
  • FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
  • 58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....
Check Stock

Xiny Tool RV Water Pressure Regulator for RV Camper, Brass Lead-Free, Adjustable Water Pressure Reducer Valve with Gauge and Inlet Screen Filter for Camper Travel Trailer

  • Easy to Use: The water pressure regulator with gauge, easy to adjust the water pressure and monitor. Perfect for camper, travel trailer, RV plumbing system..
  • Lead Free Safety: Xiny Tool water pressure regulator is made of lead-free brass, contain lowest lead than other regulator. Each rv water pressure regulator is tested to contain less than 0.13% lead, much under the NSF 0.25% lead-free requirements. Ensure the safety using of water..
  • High Compatible: The regulator is fitting with all US 3/4 inch water hose and faucet, including 3/4" GH threads and NH threads. The inlet filter on the regulator can help you filter out sands and others, protect your pipe system for long time using..
  • Water Pressure Adjustable: it can be adjusted from 0 to 160 PSI. By adjusting the screw on the top of the regulator, the pressure can be easily set to protect the water pipe system. Turn clockwise to increase pressure, counterclockwise to decrease pressure..
  • Good Service: Note: Defective rubber washer or missing rubber washer may cause leakage. Temperature changes or shaking may cause bubbles in the pressure gauge, which is normal. Reply online within 24 hours, if you have any questions, we will serve you at any time..
Check Stock

1 Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator 4 Stage In Line Air Filtration System

  • 1:" Inline Compressed Air Regulator Filter Desiccant Dryer Moisture Separator Trap Combo Inlet / Outlet: 1"" Female NPT (measures about 1" diameter) This is a directional flow unit that comes which markings showing how to install. 3 Stage Compressed Air Filtration 5 Micron (Removes Water Droplets / Debris) .01 Micron Oilesser (Removes Finer Droplets / Oil Droplets / Oil Aerosol) Desiccant Dryer (Removes Any Remaining Moisture / Vapor).
  • 1ST STAGE OF PRE-FILTER WITH 5UM FILTER ELEMENT TO REMOVE OIL, WATER & PARTICLES.
  • 2ND STAGE OF MICRO-FILTER WITH 0.01UM FILTER ELEMENT TO REMOVE 99.99% PARTICLES AND OIL..
  • 3RD STAGE OF DRYER WITH DESICCANT TO ABSORB THE LEFT WATER..
Check Stock

3/4 Compressed Air Moisture Filter Regulator Oiler Separator Lubricator Combo

  • 3/4" Compressed Air Moisture Filter Regulator Oiler Separator Lubricator Combo.
  • Brand new in line compressed air moisture filter, regulator, lubricator combo. This is a high quality unit that gives you the power to keep moisture out of your air lines, regulate air pressure, and lubricate your air lines all at once!.
  • This has 3/4" female NPT input as well as a 3/4" female NPT output port. This assembly has a 140 CFM max flow rate and comes equipped with a pressure gauge..
  • You can adjust the regulated pressure between 7 - 160 PSI with a 225PSI max PSI. The moisture filter features a 5 micron filter, 2.7 oz bowl capacity, as well as a visual sight glass to easily monitor the moisture level..
Check Stock

TAILONZ PNEUMATIC 1/4 Inch NPT Air Filter Pressure Regulator Combo Piggyback Air Tool Compressor Filter with Gauge AW2000-02

  • 【Product Name】Air Filter Pressure Regulator Combo Piggyback.
  • 【Size】Air Filter Pressure Regulator Port Size:1/4" NPT；Gauge Port Size：1/8“NPT.
  • 【Working Pressure】0-145PSI【Working Temperature】32～140°F.
  • 【Features】To lower or maintain air pressure.
  • Filter moisture and fine particles from the air..
Check Stock

TAILONZ PNEUMATIC 3/8 Inch NPT Air Filter Pressure Regulator Combo Piggyback, Air Tool Compressor Filter with Gauge AW3000-03

  • 【Product Name】Air Filter Pressure Regulator Combo Piggyback.
  • 【Size】Air Filter Pressure Regulator Port Size:3/8" NPT；Gauge Port Size：1/8“NPT.
  • 【Working Pressure】0-150PSI【Working Temperature】32～140°F.
  • 【Features】To lower or maintain air pressure.
  • Filter moisture and fine particles from the air..
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR, COMPRESSED AIR SYSTEMS, 75 CFM, GOOD FOR 15HP & 20HP COMPRESSORS (STAND ALONE DRYER)

  • NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER 115V, SINGLE PHASE.
  • PLEASE NOTE:: YOU MUST USE A MINIMUM 1 MICRON FILTER / WATER SEPARATOR BEFORE REFRIGERATED AIR DRYERS.
  • ITS VITAL THAT WATER & OIL ARE REMOVED FROM THE PIPING BEFORE HITTING THE DRYER. PLEASE SELECt OPTION " WITH PRE-FILTER" FOR A COMPLETE KIT THAT INCLUDES THE DRYER, PLUS STAGE 1 WATER SEPARATOR FILTER + STAGE 2 COALESCING FILTER FOR OIL. IF YOU NEED FILTER AND AIR PRESSURE REGULATOR, PLEASE SELECT "WITH REGULATOR PRE-FILTER" FROM THE ABOVE LINK..
  • 75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / REFRIGERANT FLUID TYPE: R134a / WIRE SIZE REQUIRED: 10 GAUGE / DEW POINT: 41 DEGREES FAHRENHEIT AT 100 PSI.
  • 220 PSI MAX INLET / DIMENSIONS IN INCHES: ( HEIGHT 29.25" ) ( WIDTH 13.9" ) (LENGTH/DEPTH 16.9") / 75 LBS.
Check Stock

INDUSTRIAL RATED Three Stage Air Drying System - Air Particulate Filter, 0.01 Micron Coalescing Filter & Air Pressure Regulator Modular Combo 3/4" NPT - Auto Drain, Metal Bowl

  • New 3 Stage air drying system. (Particulate Filter, Coalescing Filter, Pressure Regulator) Does NOT include Desiccant air dryer (3/4″ NPT Measures 1.05″ outside thread diameter in linear inches).
  • STAGE 1: Particulate Filter / Water Trap with Auto Drain. Max input pressure 175PSI.
  • STAGE 2: Coalescing Filter removes 99.98% of remaining moisture vapor, oil and oil vapor from compressed air lines.
  • STAGE 3: PRESSURE REGULATOR, REGULATES PRESSURE BETWEEN 7 – 225 PSI.
  • 48CFM @ 90PSI, 175PSI Max Input Pressure, 150PSI Max Output. Replacement Filter Stage 1 ASIN, B01MUDUXU6 .. Replacement Filter Stage 2 ASIN, B01NCZ7452.
Check Stock

Air Filter Pressure Regulator Kit Pneumatic Spray Gun Set 1/4 Inch Air Tool Compressor Filter with Gauge, Air Pressure Regulator Gauge + In-Line Oil Water Trap Filter Separator Tool

  • 【Universal Fit】: This air compressor pressure regulator has a standard 1/4 thread will fit most spray guns and airlines.
  • Helps separate solid contaminants such as pipe scale, rust, condensation from airlines.
  • 【Air Pressure Gauge】: Air pressure gauge adds convenience for monitor and adjust the pressure value in real time.
  • The clear filter bowl allows a visual inspection of built up moisture and is removed through a spring loaded valve at the bottom.
  • 【Versatile Purpose】: Air filter pressure regulator prevents water from the airline or compressor contaminating paintwork.
  • 【Lightweight and Durable Design】: 1/4 inch air spray gun pressure regulator, lightweight aluminum alloy design, durable and stable structure.
  • Compact oil water trap filter could be used with air and spray guns.
  • 【Application】: Oil water trap filter separator tool is suitable for paint spray gun and air compressor matched used with gun pneumatic tools and hoses, suitable for vehicle, marine, construction, woodworking, furniture making, paintwork etc..
Check Stock

Airbrush Depot® Brand Airbrush Compressor AIR Regulator with Water-trap Filter Now Included Is a Free How to Airbrush Training Book to Get You Started.

  • True Diaphragm Mini Regulator with Gauge and Water Trap Filter Plus A Master Airbrush How To Airbrush Booklet.
  • Improve Your Airbrushes Performance By Using This Regulator For Accurate, Moisture-Free Airflow!.
  • Master Airbrush Brand. The Regulator Provides The User Full Control of Operating Air Pressure.
  • Precise Adjustment of Airflow: Regulated Air Up To 100Psi (10-Bar).
  • Water Trap Filter: Ensures Clean, Dry Air and Has An Easy Release Drain Valve.
Check Stock

LSx Fuel Filter / Regulator, 58 PSI, Includes AN 6 Fittings for LS Swap, EFI Conversion

  • This AN6 fuel filter and regulator adds reliability and reduces cost with -6 AN inlet, outlet, and return fittings built into the assembly.
  • Designed specifically for LS swaps or EFI conversions that require a reliable and professional fuel system solution.
  • 58 PSI fuel pressure regulator is integrated into the filter and works well with modern fuel injected engines such as LS, Hemi, and more.
  • Eliminates adapter fittings and includes a mounting bracket with rubber insulator to make installation a breeze.
  • Five micron fuel filter is built into the assembly to protect your injectors and ensure a long service life.
Check Stock