ReviewsRf Amplifier

DYNASTY PROAUDIO WSA-5RP Wireless Surround Sound Rear Speakers Kit with 2 x 50W Amplifier Built-in, 5.2G / 5.8GHz Dual Band Selectable, Total 106 RF Channel Auto Switching Black (Black)

  • ✅[Lossless Audio & low Interference] latest wireless audio technology that supports 5.2 & 5.8GHz dual-band selectable digital wireless with an advanced total 106 RF channel auto selection, to avoid the WiFi interference with your 5G network, for near lossless audio and provides excellent transmission stability.
  • ✅[Easy Connection with A/V Receiver System] comes with Speaker Line Level Input and Stereo RCA Input that can receive full band audio from any audio amplifier, A/V receiver or preamp..
  • ✅[High Efficiency Amplifier Built-In] 2 x 50W RMS @ 4 ohms load Class D amplifier, allow you to connects directly to any passive bookshelf or the rear surround sound loudspeakers..
  • ✅[An additional subwoofer connection] provides an additional subwoofer mono input and output, for connecting between AV Receiver and Power/Active Subwoofer Speaker or Subwoofer Amplifier..
  • ✅[Wide Transmission Range] - Up to 100 ft (30M) operational distance between transmitter and receiver (line of sight) with 24-bit 48KHz full CD quality high resolution/uncompressed audio..
Check Stock

Frequency Converter AD831 Single Chip High Frequency RF Mixer Radio Frequency Conversion Module for HF and VHF Receiver, 0.1-500MHz

  • ...s with DC isolation capacitor, easy to use..
  • POWERFUL-- The operating frequency of the RF and LO inputs can be as high as 500MHz. IF output is single ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain..
  • EASY TO USE-- When the mixer's output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3dB at 70MHz. Different from the passive mixer, there is no insertion loss, no need external duplex device, and no need passive termination for AD831..
  • APPLICATION-- The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base station, DC-baseband conversion, quadrature modulation and demodulation, and ultrasound imaging, frequency shift detection and other applications..
  • FEATURE-- The AD831 has provide +24 dBm third-order intermodulation intercept point, realization of -10 dBm LO power, without the need for a high power LO drive..
Check Stock

Mixer Module, Bandwidth Mixing 0.1‑500MHz High Frequency Transducer -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth Mixing Down Mixing Dual Balanced Mixer Single Chip Radio Frequency Converter -10dBm

  • The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base station, DC-baseband conversion, quadrature modulation and demodulation, and ultrasound imaging, frequency move detection and other applications.
  • The AD831 has provide +24 dBm third-order intermodulation intercept point, realization of -10 dBm LO power, without the need for a high power LO drive.
  • There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost.
  • The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use.
  • The amplifier has low DC offset characteristics, so it can be used in DC-baseband frequency conversion and quadrature amplitude demodulation.
Check Stock

LANTRO JS RF WideBand Amplifier 433MHz 22dB High Gain Low Noise LNA Amplifier

  • 【Product Parameters】- Working Voltage: 3---5V.
  • Protect-----This strong heavy duty tool bag can protect your tools from water and dust.
  • 【Scope of Application】- The product can be applied to various RF receiving front ends, used for shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other RF signal amplifications that require low noise.
  • 【Excellent Performance】-The radio frequency amplifier is made of high-quality electronic components and has the advantages of high gain, low noise figure, etc.
  • 【Low Noise】- The noise factor is as low and 0.55dB, which is quite small.
Check Stock

25ft KMR400 Coax Extension Cable N Male to N Male Connector 50 Ohm Low Loss Coaxial Cables for 3G/4G/5G/LTE/GPS/WiFi/RF/Ham/Radio to Antenna or Phone Signal Booster Use Not for TV

  • ...nect the adapter and the coaxial cable . And the length is up to 2.2 in that is longer than others which would prevent the code coming off..
  • Compatibility: This ultra low-loss 400 n cable is designed to work with all devices and appliances with 50-Ohm impedance. Works for any 50 Ohm RF system. Such as an antenna and amplifier,and they can be used inside building or outside buildings. It enables perfectly secure connections between an amplifier to both indoor or outdoor antennae, taps, splitters..
  • Professionally Made: XRDS -RF is a professional manufacturer in producing coax cable. This n to n jumper is swept with USA KEYSIGHT E5071C ENA network analyzers to assure the vswr of the cable less than 1.1. XRDS -RF is committed to improving the lives of our customers, and this cable will give you unmatched product quality. All of our items come with a full year of warranty..
Check Stock

GROWORD SP-3FE Ground Loop Isolator 2Pcs Hum/Buzz/Noise Eliminator Isolation Transformer for Cable TV Applications & & Antenna(Frequency Range 5-1000MHz)

  • ✅【IMPROVE TV ANTENNA SIGNAL】Ground loop isolator made from premium materials, fits any 75 ohms coaxial (TV antenna or amplifier )and....
  • ✅【ELIMINATING BUZZING NOISE】Noise Eliminator can eliminate audio hum/buzz/noise and horizontal scrolling bars caused by ground loops..
  • ✅【PROVIDE 6KV LIGHTNING PROTECTION】The Isolator eliminates ground loops,prevent lightning strikes and provides a degree of protection for....
  • ✅【SUPERIOR RF PERFORMANCE】Isolator shows superior RF performance operating at a frequency range of 5-1000 MHz. Fits any TV antenna or....
  • ✅【HUMANITY DESIGN】Metal shell is made of copper and shielding layer, environmentally sealed against moisture and humidity. Compact size, can be....
Check Stock

Dpg-200 Vacuum Transducer with

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

KICKER (2) 44L7S152 15" 4000 Watt Solobaric L7S Subwoofers+Amp+Sub Box+Wire Kit

  • Package Includes: (2) Kicker 15" Car Subwoofers. (1) RockvilIe Dual 15 MDF Solo Baric L7/L5/L3 Vented Subwoofer/Car Sub Box. (1) RockvilIe dB15 6000 Watt/3000w RMS Mono Class D 2 Ohm Car Audio Amplifier. (1)Engauge by Memphis KIT0 0 Gauge Amplifier Amp Installation Wire Kit 17 ft. RCAs. 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 20 Feet of 14 AWG Blue Speaker Wire. 4 Spade Terminals. Features:.
  • Kicker L7S152 15" 2000 Watt Solobaric L7S Car Subwoofer Solo-Baric 44L7S15-4. Dual Two-Ohm Voice Coils. Injection-Molded Polypropylene Cone. Patented Corner Ribs Minimize Distortion. SoloKon 360-Degree Back Bracing. Ribbed Santoprene Surround With Blue Surround Stitching. UniPlate Back Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management. Thick Tinsel Leads. Large Ceramic Magnet. Cast Aluminum Basket. Satin-Nickel Plated, Spring-Loaded Speaker Terminals.
  • The Solo-Baric L7S 15-Inch Subwoofer works best with a sealed or ported enclosure and 1,000 watts of recommended power. See below for more details. Specifications: Size: 15" (38.1 cm). Impedance: 2 Ohms DVC. Max Rec Amplifier Power: 2000 Watts Peak / 1000 Watts RMS. Sensitivity: 89.4 dB 1w/1m. Frequency Response: 18Hz - 100Hz. Moun....
Check Stock

4 Rockville WB65KLED 6.5\ 600w Metal Marine Wakeboard LED Tower Speakers+Amp+Mic

  • Package Includes: (2) Pair Rockville RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles. (1) Rockville ATOM S20 Marine Bluetooth Amplifier 1600w 4 Channel/Volt Meter+PA Mic. (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (1) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin.
  • Features of RKL65MBW: Pair Rockville RKL65MBW 6.5” 2-Way 700 Watt Marine Boat Speakers with LED Lights. CEA Compliant Power Ratings. Power Rating: 350 Watts Peak /85 Watts RMS Per Speaker. Total Power: 700 Watts. Beat sync LED’s flash to the rhythm of the music. You can select either red or blue color LED’s on the wire harness. No extra installation for the LED. It gets a power signal through your speaker wire..
  • Features of ATOM S20: Rockville ATOM S20 1600 Watt Peak/440 Watt Dyno-Certified RMS 4 Channel Class AB Marine Stereo Amplifier With Bluetooth. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, RF faostgte etc). 2 Ohm: 110 Watts x 4 Channel 003c1% THD+N @ 14.4 Volts. 4 Ohm: 70 Watts x 4 Channel 003c1% THD+N @ 14.4 Volts. 4 Ohm Bridged: 220 Watts x 2 Channel 003c1% THD+N @ 14.4 Volts..
Check Stock

70 Feet 12V Long Run RGB LED Strip Light Waterproof Outdoor Landscape Colors Changing Rope Light Kit Comes with Mini RF Controller and Plug-in Power Supply

  • ✅ Long Run: Single strand continuous strip light runs up to 80ft in one piece, no splicing no amplifier, only one power and one controler from one....
  • ✅ RF Controller: Radio Frequency remote controller, easy to hide and cover, RF signal goes 30-40ft range and goes through walls. It has 8 static....
  • ✅ Super Bright LEDs: The strip light uses SMD 5050 triple chips RGB LEDs, 9 LEDs per foot, they have high luminious density with high brightness....
  • ✅ Low Voltage: DC 12V operated strip light comes with power supply, the strip light can be placed outdoor or indoor in moist area with no electrical....
  • ✅ Waterproof IP67: The strip light is endurable and encapsulated in a transparent silicone tube, super flexible for indoor outdoor illumination,....
Check Stock