ReviewsRgb Led Ribbon

Phanteks PH-FF140RGBA_BK01 Halos Lux RGB Fan Frame High density LEDs RGB 140mm fan mounting,Black

  • Premium Aluminum Frame. The Halos Lux is milled from one single block of aluminum and anodized in Satin Black. High density LED. Light is spread evenly thanks to high density LED's and diffuser.
  • There is no compromise on performance. Even high quality fans made from PBT material, like Phanteks' MP and SP fans, can now be illuminated.
  • Sync RGB lighting. Sync the RGB lighting with any RGB equipped Phanteks case and motherboard. Compatible with Aura Sync, Mystic light, RGB Fusion.
  • Mounting screws included. The Halos RGB Fan Frame can be mounted directly to the fan with the included fan screws or mounted to a radiator mounted fan using the UNC 6-32 radiator screws.
  • Compatibility: 140 fan mounting. RGB LED Type: RGB LED strip hard board , +12V, G,R,B. LED Number: 21pcs.
Check Stock

Spectra Precision RC601 Handheld Remote Control Measuring Tool Accessory for Spectra HV101, HV301, HV301G, LL100, LL100N, LL300, & LL300N Laser Levels

  • This RGB LED ring can work with AVR, Arduino, Raspberry Pi, PIC, mbed etc..
  • Voltage:DC4-7V,usually we use USB 5V to power it.
  • Communication interface:Single-wire communication..
  • You can set the led brightness in the arduino code, and also you can program each light individually..
  • Note: The led ring doesn't come with cable..
  • What you will get is: 1 X 12 Bits WS2812 5050 RGB LED Ring,1 X 16 Bits WS2812 5050 RGB LED Ring,1 X 24 Bits WS2812 5050 RGB LED Ring,1 X 60 Bits WS2812 5050 RGB LED Ring..
Check Stock

2 pcs black 4 Pins LED Splitter Cable LED Strip Connector 4 Way Splitter Y Splitter for One to four RGB 5050 3528 LED Light Strips with 10x Male 4 Pin Plugs -30cm/12inch Long

  • 1 to 4 female connection cable For - 5050/3528 RGB LED Extension Cable is designed for 10mm width LED strips.
  • 1 end to connect with LED RGB controller, the other ends for 4 Reel LED RGB strips.
  • This DC Power Adapter Cable splits 1 power signal into 4, enables you to connect 4color changing RGB LED strips to a single controller.
  • Power supply with sufficient amperage for 4 strips is required.
  • Package Content: 2x RGB LED Strip Splitter Cable.
  • 10x male 4pin plugs (electroplated copper on the 4 pins, perfect conductivity)DescriptionDesign: 1 to 4 Splitter Cable Connect four color changing RGB 5050/3528 LED strips to a single controller with this 4 pin splitter cable. No soldering is required, simply match the arrows on the plug. Features: 1). The insulation plastic of this cord adopts high quality PVC, anticorrosive. 2). This extension cord contains 4 strands of pure copper wires inside, which ensures flexibility, durability, and perfect electric conductivity. 3). The cord and the 4pin plugs fit snug. 4). Easy to plug, reliable connection, excellent performance. Just buy with confidence! Note: A power supply with sufficient power for multiple led strips is required. Package Includes:2x RGB LED Strip Splitter Cable.
  • 10x male 4pin plugs (electroplated copper on....
Check Stock

4 pcs Pack Black 3M 9.84ft 4 Color RGB Extension Cable LED Strip Connector Extension Cable Cord Wire 4 Pin LED Connector for SMD 5050 3528 2835 RGB LED Light Strip RGB Wire RGB Extension Cable

  • For - 5050/3528 RGB LED Extension Cable is designed for 10mm width LED s.
  • Package Includes: 4x 3m 4pin extension cable for RGB LED strips, 8x male to male 4pin plugs..
  • Functions - 1.Connect between Controller and 5050/3528 RGB LED strips, to extend your LED strips to the ideal location where you'd like to install.
  • 2.Connect between RGB LED strips, making it possible to install your multiple RGB LED strips in your preferred locations. So, you can control your LED strips in another location..
  • Solderless - With 2 pre-soldered female connectors and 2 male 4 pin plugs(copper electroplated), you can directly plug this cable into your 5050/3528 RGB LED strips or controller to get them connected, without soldering..
  • Flexible and durable - The color is pretty. The PVC plastic insulation was durable and flexible. The pure copper wires inside are stranded so it can take a lot of flexing without breaking..
Check Stock

Cooler Master 1-to-5 ARGB Splitter Cable / 5V - Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support(ARGB 1-to-5 Splitter)

  • Cooler Master 1-to-5 ARGB Splitter Cable，NOT support 12V RGB, Only support 5V RGB.
  • Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support.
  • 3-pin ARGB Header compatibility,2ft/60cm Long and flexible material makes it easy for cable routing. Keep it effortless and hassle free..
  • NOTE: 1. (DO NOT connect an Addressable RGB(ARGB/Digital RGB +5V) Fan to a Non-Addressable RGB(Standard +12V) motherboard header or RGB controller. 2. Beyond the look, Cooler Master provides quality. With high quality material, keep your build reliable and flawless. Certified Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB..
  • Splitter: - Connection Type: Straight Through Wiring (Passive Wiring) - Connector A: 3-pin RGB LED Connector Female - Connector B: 3-pin RGB LED Connector Male.
Check Stock

Lpteso RGB LED Light Bar 52'' inch + 2PCS 4 Inch Flood RGB LED Pods with 16 Solid Colors Chasing Ring Changing with Strobe Flashing with Upper Windshield Mounting Brackets Fit Wrangler JK 2007-2018

  • 【LED Light Bar with RGB Halo Ring Chasing Light】 Lpteso LED White Light Bar and Pods with RGB Halo Ring Chasing Light.16 solid colors and over 92 strobe flashing modes. Million of colors you can choose and the RGB LED lights kit will follow the rhythm of your music or your voice to glow, including rock, relaxing tunes and dance music. The APP or remote can be switched to control the whole light bar smoothly..
  • 【High Quality Off-Road LED Work Light】 All of our RGB light bar and light pods can be synced automatically once hook them up at the same time. High quality premium leds with deep reflector cups, it emits brighter and farther illumination distance, clearly light up your offroad truck way!.
  • 【High Performance】 IP67 protection level RGB led off road lights has excellent waterproof, dustproof and shockproof performance.The die-cast aluminum housing, stainless steel brackets can withstand harsh outdoor conditions..
  • 【With Special Mounting Bracket】Special Upper windshield mounting brackets fit for 2007-2018 Wrangler JK.High quality mounting brackets, easy installation, no drilling required, direct bolt-on insta....
Check Stock

TIETI Light Strips for PC, Neon LED Strip Kit for 5V 3-Pin RGB LED Headers Compatible with Razer,Corsair, Asus Aura, Asrock RGB Led, Gigabyte RGB Fusion, MSI Mystic Light

  • Uniform Illumination: Our strips are designed with LED Digital-RGB motherboards and silicone for a full range of colors, bringing a brighter, more uniform, spot-free effect..
  • Wide Compatible: RGB LED strips are designed for Motherboard with 3-pin RGB led strip header.Compatible with Razer,Corsai, Asus Aura, Asrock RGB Led, Gigabyte RGB Fusion, MSI Mystic Light ect. Note: Not Compatible with 12V RGB 4pin..
  • DIY Your Own Mode:The super bright led strips for modding your PC case which create amazing RGB sync effects and more brighter, these lights strips perfect for gamers or someone who want to decorate the computer..
  • Flexible Installation: Our light strips come with 3 mounting clips and 3M adhesive that can be bent into any shape, allowing easy and stable installation to a metal chassis..
  • Package Includes: 2x 19.6inch LED Strip, 1x 23.6inch extension cable,1x 11.8inch extension cable, 4x 90° mounting kit,4x 180° mounting kit,4x Flat mounting kit,12x 3M doutble side adhesive..
Check Stock

Corsair CO-9050060-WW SP Series, SP120 RGB LED, 120mm High Performance RGB LED single fan with controller

  • 4 hub mounted RGB LED's / 4 unique lighting effects with speed control Air flow - 52 CFM Noise level - 26 0 decibels.
  • Intuitive 3-button RGB LED controller / high static pressure tuned for optimal Air delivery.
  • Ultra-thin fan blades ensure quieter performance / 2 year.
  • Controller 3 button (Effect speed color mode)/Effect speed high medium slow/color White red Orange yellow Green Blue violet demo/ mode static Breathing pulse Breathing + pulse.
  • RGB LED hub 6 port RGB LED hub / allows connection of up to 6 SP120 RGB LED lighting cables to a single fan hub / add more fans and have the same mode/color/Effect speed across all attached fans.
Check Stock

Speclux Addressable RGB LED Strip Lights RGBIC Magnetic Strips 4 PCS Light Strips 84LEDs for 5V 3-pin ARGB LED headers for ASUS Aura SYNC Gigabyte RGB Fusion MSI Mystic Light Sync Motherboard

  • Addressable LED Strip with RGB SYNC CONTROL: Magnetic LED Strip Lighting are designed for Motherboard with 3-pin Digital RGB led strip header....
  • Two Different Easy Installation Methods: Our RGBW LED Strip Built-in magnets and 3M adhesive tape. The built-in magnets can be easily installed on the....
  • User-friendly Design: The RGB LED Strip Lights full kit comes with all the essential parts you may need for your PC MB. Plug and play. Each strip is....
  • PACKAGE INCLUDES:1x ADD RGB extension cable A(for ASUS, MSI, ASROCK ect), 1x ADD RGB extension cable B(for Gigabyte), 3x Extension Cables, 4x Digital....
  • No Risk to Purchase: Any quality issue with your RGB LED Lights, please feel free to contact us and let us know. We will try our best to help you!....
Check Stock

DEEPCOOL CF120 3IN1 Addressable RGB Motherboard SYNC by 5V ADD RGB 3-pin Header SYNC with Other ADD-RGB Devices Cable Controller Available 3x120mm PWM Fans

  • If your motherboard has ONE 5V 3-pin ADD-RGB header, you can use it to connect RGB extender cable to control and SYNC these three fans and one more....
  • If your motherboard does not have 5V 3-pin ADD-RGB header, you can use the included cable controller to connect the RGB extender cable to realize SYNC....
  • Fan speed can be intelligently controlled by motherboard in accordance with temperature.
  • Utilize 12pcs of independently programmable RGB LEDs for amazing display effects.
  • Fan Connector: 4Pin. LED Type: Addressable RGB LED. LED Connector: 3pin (+5V-D-G). LED Control: motherboard with 5V ADD-RGB Header. Cable controller....
Check Stock

NEON Addressable RGB PC LED Strip, Speclux 2x15.7inch WS2812 RGBIC Rainbow Magnetic ARGB Strip for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, with 12pcs Strong Magnetic Brackets

  • Addressable RGB SYNC CONTROL: Speclux Addressable RGB LED strips are designed for Motherboard with 3-pin Digital RGB led strip header (+5V,DATA,N/A,GND or VDD,DATA,GND), Compatible with Asus Aura, Gigabyte RGB Fusion, MSI Mystic Light, ASROCK RGB LED etc. Before you place the order, make sure there is 3-PIN ARGB header on your computer's Motherboard, and check if the Motherboard outer package has a RGB SYNC logo, if no RGB SYNC logo, it not support rgb sync..
  • Great DIY effect: Speclux 5V 3pin neon ARGB LED strips are extremely bright and have great effects for decorating your PC case and achieving the cool RGB synchronization. These cool effect are perfect for DIY gamer to create a cool game space..
  • Easy installation operation: These neon RGBIC pc strips can be mounted and fixed in a variety of orientations as they curve easily. If your PC case is ferromagnetic, it is easier because this NEON kit comes with 12pcs high quality strong magnetic mounting clips, including three different angles, also with 12 pcs 3M adhesive for option, great for the DIY gamers. And the 3 copper wires with PC cover can protect the wire end avoid disconnection, it's more durable than others..
  • User-friendly: The surface of the light strip is sealed and with IP65 waterproofed en....
Check Stock