ReviewsRibbon Drive Assy

Cloud Microphones Cloudlifter CL-1 Mic Activator 1-Channel with Samson Over-Ear Stereo Headphones and XLR Mic Cable

  • ACTIVE ULTRA-CLEAN GAIN: Provides up to +25dB of ultra-clean gain in two distinct stages and optimal impedance loading for dynamic and ribbon mics to perform their best..
  • SIMPLE PLUG & PLAY: Simply connect your dynamic or ribbon mic to the input and connect a mixer or preamp to the output..
  • NOISE-FREE AMPLIFICATION: Many preamps sound great until you push them, resulting in all the hiss and crackle produced by the amplifier itself ending up in the mix. The gain boost provided by your Cloudlifter lets your mic pre work more efficiently, giving you the levels you need, without the noise..
  • PHANTOM POWERED: Turns Phantom Power into gain and clarity without passing it through to your delicate ribbon mic..
  • ESSENTIAL FOR LONG CABLE RUNS: If you work in a large, multi-room studio you won't believe what a difference a Cloudlifter will make. With its extra gain boost to drive your signal, even cable runs over hundreds of feet won't drain the life out of your sound. The result is nothing short of remarkable..
Check Stock

Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer

  • 1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not for V1) 3D printer.
  • 2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level.
  • 3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock..
  • 4.Direct drive extruder, great support for flexible filament..
  • 5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase..
Check Stock

CableCreation Internal Mini SAS HD Cable, 1.6FT Mini SAS SFF-8643 to Mini SAS 36Pin SFF-8087 Cable, Mini SAS 36Pin to SFF-8643 Cable, 0.5M

  • ...nd 4x SAS 29 pin SFF-8482 data and power Target drive connectors.
  • DIY or pro installers require a forward fan-out cable with an internal mSAS connector when expanding storage needs for Storage Area Network (SAN) or Direct Attached Storage (DAS) applications.
  • Sturdy molded connectors provide a secure connection.
  • Slim ribbon cables in a woven mesh sheath minimize airflow impact in a computer case.
  • Integrated SATA power supply cables make it easy to see what is connected.
Check Stock

MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

  • ...hain. It will work with engine sizes hp2 to 8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【The Belt Feature】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【Go Kart Torque Converter Kit comes with】1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
  • 1 x Full Mounting Hardware. Note This is not made by Comet.
Check Stock

Complete GY6 Cylinder Head Rebuild Kits with valves, Trkimal 57.4mm 150cc Big Bore Upgrade Kits for 4 stroke 157QMJ Engines Chinese scooter moped parts, GY6 Engine parts Sunl Roketa Peace

  • 【Cylinder Bore】: 57.4mm / Non-EGR Cylinder body.
  • 【Full sets of parts】: Complete parts is suitable for motorcycle maintenance shop, motorcycle parts supermarket and personal use with nice price..
  • 【Apply to】: GY6 4 stroke 125cc/150cc engine for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 150cc Cylinder Head Comp, 57.4mm Bore Cylinder Block, Set of 57.4mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, DC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 14 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 90, belt 835*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch, intake mani.
Check Stock

Mophorn Torque Converter CVT 2HP-7HP 3/4' Go Kart Clutch 212CC 30 Series Mini Bike 10T #40 41 Chain and 12T #35 Replacement Set TAV2 30-75 218353A Manco CVT Clutch Small Engine Drive Belt

  • Modified TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life..
  • Updated Durable Belt: The new type of belt, go-kart asymmetrical belt 669, is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter..
  • Quality Drive Clutch: We have a 3/4” Driver Pulley and a 5/8” bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems..
  • Vehicle Fitment: The torque converter is compatible with 3/4″ & 5/8″ straight crankshaft. You can usually use it on 4-8 hp go-karts and motorbikes..
  • Full Accessories: Our torque converter clutch has full accessories: 1 x 3/4″ driver pulley. 1 x 5/8″ bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware..
Check Stock

GY6 Cylinder Rebuild Kits Trkimal 47mm 80cc Big Bore Upgrade Kits for 49cc 50cc 139QMB Engines 64mm Valve scooter moped parts, GY6 Engine parts for Chinese Scooter(64mm Valve Length)

  • 【Cylinder Bore】: 47mm / Non-EGR Cylinder.
  • 【Apply to】: GY6 4 stroke 49cc 50cc 60cc 80cc engine upgrade for most of chinese scooter, atv and go karts.
  • 【Parts included】:GY6 80cc Cylinder Head with 64mm valve, 47mm Bore Cylinder Block, Set of 47mm Piston Assy, Piston, Rings and Wrist Pin, Full Set of Engine Gasket, 6pins CDI, Ignition coil, 4pin AC regulator, relay, A7TC Spark Plug, Set of Intake Manifold and Muffler Bolts, and Exhaust locking ha, Set of 8.5 Gram roller , Rocker Arms, Valve Seals, Oil Pump Assy with Driving Gear, Camshaft, Camshaft chain 82, belt 699*18*30, Chain adjuster, Oil screen, spring, cover and oil seal, Starter clutch.
  • 【Fit to】Roketa, Sunl, Baja, Taotao, Panterra, Redcat Tank Giovanni Wildfire Xtreme Seaseng Qlink Yiben Jonway Jmstar, Vento.
Check Stock

212CC Torque Converter 6.5 HP 3/4 Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series

  • ...utch Kit】This torque converter fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design. Bring your off-road machine to life..
  • 【30 Series Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【This clutch will help you get more power out of your small engine by reducing engine load】 A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【For your convenience this kit comes with】1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
  • 1 x Full Mounting Hardware. Note This is not made by Comet.
Check Stock

pc-mart New 9.5mm UJ8A8, UJ-8A8 CD-RW DVD-RW SATA Burner 8X Dual Layer DVD Super Drive for MacBook Pro 13” A1278, MacBook Pro 15” A1286, MacBook Pro 17″ A1297 Laptop

  • Condition: Brand New never used, Model Name: UJ8A8, UJ-8A8 CD DVD RW DVD-RAM Burner Drive..
  • 9.5mm in height, SATA Interface, Slot-in Loading. Plug and play, Without Bezel or eject button..
  • 5X Speed DVD-RAM Writing 8X Speed DVD±R Writing 4X Speed DVD±RW Writing 4X Speed ±R (DL) Dual layer Writing 24X Speed CD-R Writing 24X Speed CD-RW Writing 8X Speed DVD-ROM Reading 24X Speed CD-ROM Reading..
  • Note: Does not include metal mounting bracket, orange ribbon cable and software. – Drive only..
  • Kindly double check your Burner DVD±RW drive before purchasing, if it has a SATA laptop interface, a 9.5mm-thick drive and if you have a Unibody MacBook Model, 1 Year Seller Warranty..
Check Stock

UJ267 UJ-267 9.5mm SATA Slot-in 6X 3D Blu-ray Burner BD RW Drive for MacBook Pro Dell Alienware M14x XPS 14z 15z and Sony Vpcz1 Vpcz117gg Laptops

  • UJ-267 Slot-in load 9.5mm ultra slim BLU-RAY BD-RW DVD-RW CD Drive for Macbook pro and Dell Alienware 14 Play and Burn Blu-Ray movies!.
  • BD-R XL Support for 100GB and 128GB Recordable Blu-ray discs Slot Load Blu-ray Super Multi Burner reads and writes Blu-ray, DVD and CD discs Fast Slimline SATA connection for new generation of Blu-ray optical disc drives (ODD).
  • Compatible for: Microsoft Windows2000, XP, Vista, 7, 8,10 Mac OS 10.5 or later.
  • Fits also Macbooks made: MID 2009, LATE 2009, 2010, 2011, 2012 (this will not fit EARLY 2009 macbooks!) Fits SONY/DELL and other brands of computers that take a slot-in load 9.5mm drive (measure the height of your current drive it should be 9.5mm).
  • Dual-layer SATA drive. Does not include metal mounting bracket. Does not include ribbon cable. Does not include original faceplate.
Check Stock

Sloan Valve Company 3301037 Sloan Repair Kit Urinal 1.5 Gpf A-37-A

  • Includes Relief Valve Disc Segment Diaphragm and Guide Assy..
Check Stock