ReviewsRifle Scope Base And Rings

Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 1.20 inch Height

  • 1.20 inches in height, measured from the center of the rifle scope tube to the bottom plane of the rail mount.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Mount base mechanism comes equipped with custom locking bolts that slot seamlessly into your rail system with zero wiggle - guaranteed to hold zero against the toughest of recoil. Avaialble for either Picatinny or Weaver bases..
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • All Monstrum products come with a lifetime guarantee.
Check Stock

Monstrum Dovetail 11 mm / 3/8 inch Scope Rings V1 | High Profile with See-Through Base | 1 inch Diameter

  • Dedicated scope rings for the Dovetail (11mm/3/8 inch) mounting platform | Not compatible with other dovetail formats, Weaver, or Picatinny platforms.
  • Dovetail rails are commonly found on air rifles, air pistols, and select model .22 rifles.
  • The scope rings are 1 inch in diameter and are compatible with standard 1 inch tube rifle scopes.
  • The high profile design with see-through base allows for the simultaneous use of iron sights without removal of the scope.
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

Monstrum Dovetail 11 mm / 3/8 inch Scope Rings V2 | High Profile with See-Through Base | 1 inch Diameter

  • Dedicated scope rings for the Dovetail (11mm/3/8 inch) mounting platform | Not compatible with other dovetail formats, Weaver, or Picatinny platforms.
  • Dovetail rails are commonly found on air rifles, air pistols, and select model .22 rifles.
  • The scope rings are 1 inch in diameter and are compatible with standard 1 inch tube rifle scopes.
  • The high profile design with see-through base allows for the simultaneous use of iron sights without removal of the scope.
  • All Monstrum mount and accessory products come with a lifetime guarantee.
Check Stock

CRICKETINNY RAIL MOUNT

  • M1SURPLUS Presents This Complete Optics Kit For Use With Keystone KSA .22 Cricket and Chipmunk Rifles.
  • Includes Compact 4x32 Rifle Scope, Rings And KSA Keystone Factory Optics Mounting Base.
  • Scope is Nitrogen Charged with Weather Resistant Seals and Fully Adjustable for WIndage / Elevation.
  • This Item Cannot Be Exported Outside The USA.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 34 mm Diameter | 1.40 inch Height

  • 1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 34 mm Diameter | 1.00 inch Height

  • 1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Monstrum Precision V2 Picatinny Scope Rings | 30 mm Diameter | 0.85 inch Height

  • 0.85 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

Hatsan Hercules Bully .45 Cal Air Rifle with Scope 3-9x40 (w/Rings) and Wearable4U 30x .45 Cal Pellets and Hard Case and Bundle

  • IN THE BOX: 1x Hatsan Hercules Bully .45 Caliber PCP Air Rifle with 3-9x40 Scope (with Rings).
  • Genuine bullpup design, manual loading, side-lever action, pre-charged pneumatic (PCP) air rifle. QuietEnergy fully shrouded barrel and Integrated Sound Moderator – Approximately 50% Quieter..
  • Precision rifled and choked barrel for accuracy. “EasyAdjust” Cheek Comb – Stock equipped with integrated elevation adjustment button. Long combination optics rail accepts both 11 mm and Picatinny scope mounts..
  • 3-9x40 Scope with Rings included. Air rifle Hard case. The case is designed for the storage, safety and security of your Air rifle..
  • Max Velocity: 850 fps. Shots At Optimal Velocity: 8. Max Energy: 290 ft/lbs..
Check Stock

Monstrum One Piece Scope Mount for Marlin 336/1894/1895 Series Lever Action Rifles | Low Profile | 1 Inch Diameter

  • Dedicated scope mounting platform built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Rings are 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Scope mount base installs directly to the Marlin factory mounting holes via the included set screws with no additional mounting hardware required.
  • Note that the low profile design may not accommodate scopes with large objective bells and that installation may require removal of your rear sight. Please measure scope mount dimensions against your scope before purchasing..
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 1 inch Diameter | Black

  • Dual ring scope mount for mounting standard 1 inch tube rifle scopes to Picatinny equipped rifles.
  • Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
  • Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening.
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
  • 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings.
Check Stock

Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 30 mm Diameter | Black

  • Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes to Picatinny equipped rifles.
  • Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount.
  • Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening.
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
  • 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings.
Check Stock