ReviewsRight Angle Antenna

Proxicast Active/Passive GPS Antenna - Through Hole Screw Mount Puck Style with Right Angle SMA Connector on 20 inch Coax Lead - 28 dB LNA

PERMANENT MOUNT - Through Hole Design for Vandal Resistant Mounting - No Exposed Cable.
RIGHT ANGLE SMA CONNECTOR - Fits into Tight Spaces - Works with Standard GPS Outputs.
GPS ANTENNA - 1575.42 ±1MHz Center Frequency for USA GPS L1 Receivers - 2 dBic (Zenith).
LOW NOISE AMPLIFIER - Boosts GPS Signal - 28 ±2dB Gain - Compatible with 2.2~5V DC GPS Receivers.
WEATHERPROOF - IP67 rated - Perfect External GPS Antenna for Cars, Trucks, Vans, Boats & RV's.

1x SpiroNet V2 omni headset antenna, with right-angle sma, optimized for headset use.
1x 45 degree sma adapter, for patch mounting..

Frequency Range: VHF 136-174MHz, UHF 400-470MHz.
Antenna Interface Connector: UHF PL259 Male 50 Ohm Connector.
Antenna Mounting Connector: UHF SO239 Female Right Angle Bulkhead Mount 50 Ohm Connector.
Cable Connector: UHF PL259 Male 50 Ohm Connector.
Compatible with Amateur Mobile Radio, Ham Radio, FRS GMRS Two Way Radio: BTECH, ICOM, Kenwood, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra, Uniden, President, Galaxy Audio, Pro Trucker, Stryker.
Package List: 1 x Antenna, 1 x Cable, 1 x Lip Mount Bracket(including Hexagon Wrench) (As the Picture Shown).

Frequency Range: VHF 136-174MHz, UHF 400-470MHz.
Antenna Interface Connector: UHF PL259 Male 50 Ohm Connector.
Antenna Mounting Connector: UHF SO239 Female Right Angle Bulkhead Mount 50 Ohm Connector.
Cable Connector: UHF PL259 Male 50 Ohm Connector.
Compatible with Amateur Mobile Radio, Ham Radio, FRS GMRS Two Way Radio: BTECH, ICOM, Kenwood, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra, Uniden, President, Galaxy Audio, Pro Trucker, Stryker.
Package List: 1 x Antenna, 1 x Cable, 1 x Lip Mount Bracket(including Hexagon Wrench) (As the Picture Shown).

Package Included:5x Receiver Antenna Protection Tube+5x Tube Protective Cap..
Suitable for FPV racing quadcopter frsky receiver 2.4g antenna line ipex4 antenna..
Tube:Length:15cm (5.9inch),Outside diameter:3mm.
Protect fragile receiver antenna.With the protection tube,you do not need worry that propeller cut down the antenna.Can be used as support and buffer for antenna..
It help making receiver antenna fixed proper angle to achieve best signal.Has insulation function..

【Parameters】- Tube Inner Diameter: 2mm/0.08".
Material: Plastic Tube, Aluminum Alloy Mount.
【Good Material】-The antenna base is made of high-quality aluminum alloy material, waterproof, wear-resistant, corrosion-resistant, sturdy and durable.
The antenna tube is made of high-quality plastic, sturdy and durable, and has good flexibility, It protects the fragile receiving antenna and protects the antenna from damage, Won't break in a collision.
【Easy to Use】-This antenna tube is easy to trim and use, you can cut it to fit the size, well-made, durable, very suitable for protecting your antenna.
antenna base can be used as a good support for the transmitting antenna, which helps to fix the receiving antenna at a proper angle to obtain the best signal.
【Application】- RC antenna mount is compatible with DIY RC model, such as RC boat, RC vehicles and so on.
【Package Contents】- 5 pcs x RC Antenna Mount +5pcs x Antenna Tube.

【Size】: Fits all standard 1-inch marine antennas. Base measures 3.62x 2.52 inch..
【316 Stainless Steel】:TINGZHIGO Marine VHF Antenna Mounts are made of 316 stainless steel. In humid air or high-temperature weather, compared with 304 stainless steel or iron material, 316 stainless steel has stronger anti-rust, abrasion resistance..
【Dual Swiveling Ratchet Design】Dual swiveling ratchet design, the marine VHF antenna mounts have two adjustable ratchets that can be easy to adjust mounting on slanted or level surfaces..
【Easy for installation】Upper ratchet: When the handle is set upright, you can adjust upper ratchet, it has an adjustable angle of 270 degrees. Once you have determined the angle you want, pull the handle down to hold it in place. Lower ratchet: First, you loosen the screw in lower ratchet and you can adjust it to the angle you want. The lower ratchet has an adjustable angle of 180 degrees. Finally, you have determined the angle you want, tighten the screws in lower ratchet..
【Packaging】: 1x Marine VHF Antenna Mount,4x Screws,4 xBolts,4x Nuts . We provide screws for you to install. You can choose the screws according to your actual situation. (Screws are made of 316 stainless steel). Before delivery, we will carefully check ....

Antenna Extension Cable: RG174 3M/ 9.8Ft.
Connector: Fakra c blue female right angle.
Features: Strong magnetic base mounting,Compact construction/ Low profile, Fully waterproof, Excellent temperature stability, Low noise figure.
Works for VW: MFD2 RNS2, Golf 5, Golf Plus, Jetta, Passat, Touran, Touareg, T5, T5 Multivan RNS300 310, RNS315, RNS500, RNS510.
Works for Audi: RNS-E (16: 9),MMI DVD 2G,3G,BNS low line.

【Parameters】- Outer diameter: 3mm/0.12".
【Advantage】- Receiver antenna tube has insulation effect,keeping the antennas out of harm away while not breaking in a crash..
【Feature】- RC antenna tube helps making receiver antenna fixed proper angle to achieve best signal..
【Application】- Antenna pipe tube is compatible with DIY RC model, such as RC boat toy ,RC vehicles and so on..
【Package Contents】- 5Pcs x RC Model Car Antenna Pipes.